FS: Ka24de-t modded Greddy TD06-20g, maf and more.

[Loofee95SE]

Up for sale;
1. Ka24de Greddy TD06-20G turbo kit w/o the e-manage. fresh rebuilt and modified turbo with 50 trim compressor wheel, all new Mitsu bearings and centre section, the housing machine to fit 50 trim wheels. Built by Brian @ BNR supercar.
the kit will include prewelded oil pan, all gaskets and bolts, cast Greddy exhaust mani, intake pipe with Greddy filter, 02 housing, oil feed and return line. $1400 shipped.

2. Nissan factory strout bar for S13, almost the same as the older Nismo strout bar for ca18det, but with out the hump (uber rare) $100 shipped.

3. Greddy vspec " COLD PIPE" perfect fit for ka-t. $60 shipped.

4. JWT pop charger with N60 maf w/o plugs. both for $80 shipped.
pics:
http://i54.photobucket.com/albums/g116/c-turbo240/DSC01936.jpg
http://i54.photobucket.com/albums/g116/c-turbo240/DSC01935.jpg
http://i54.photobucket.com/albums/g116/c-turbo240/DSC01941.jpg
http://i54.photobucket.com/albums/g116/c-turbo240/DSC01940.jpg
http://i54.photobucket.com/albums/g116/c-turbo240/DSC01943.jpg
http://i54.photobucket.com/albums/g116/c-turbo240/DSC01946.jpg
http://i54.photobucket.com/albums/g116/c-turbo240/DSC01929.jpg
http://i54.photobucket.com/albums/g116/c-turbo240/DSC01928.jpg

spacial price for anybody who buy more than 1 item.
e-mail me [email protected]
or pm me here for more detail for the stuff I have. C

[Loofee95SE]

pm replied, sale pending for pop charger, maf and cold pipe.
c'mon guys...buy my stuff so I can pay my bills. C

[eastcoastS14]

more specs on the turbo? how much hp is it good for etc...also are you willing to part the kit out?

I also have a top mount t3 set up if youre willing to trade

[98koukile]

So the Greddy kit is everything minus the emanage and the upgraded injectors, and the turbo has an upgraded compressor wheel?

[Loofee95SE]

So the Greddy kit is everything minus the emanage and the upgraded injectors, and the turbo has an upgraded compressor wheel?

it does not come with the pipe from turbo to the TB, but other than that it's complete.
the turbo will support ATLEAST 400hp with out the upgrade wheel., so with the 50 trim wheel it should support at least that much and be more effician
from talking to th ebuilder full boost should be seen at around 2500-2800 rpm.

PS: cold pipe, maf and pop charger :SOLD
C

[altalti]

what exactly is the kit missing from being plug and play on my s14.

[Loofee95SE]

the kit :
TD06-20G turbo : rebuilt and modified.
Prewelded oil pan
oilfeed/return line
Cast manifold
intake pipe
02 housing
Greddy airinx filter
all gasket and bolts.

pretty much what u will need is a downpipe to connect the 02housing to the cat, and a long pipe from the turbo discharge to the TB, the cast manifold also has the bung for the EGR, it depend on how much power u want to make, the basic kit I offer here with 370cc injectors ( which is not included) will make around 250 rwhp at around 7-9 psi. with more power FMIC, FP, bigger injectors, and boost controller, and some kindda tune ie; AFC or the e-manage will be needed. again the stock Td0620G will support over 400hp, and mine is not stock. C

PS: I'll include 2 sets of STOCK Ka24de injectors with this kit aswell.

[NiZMo1o1]

would you part out the Greddy Airnex?

[Loofee95SE]

would you part out the Greddy Airnex?

as off right now, NO. but if I don't sell the kit within a week, I'll pm u. C

[Loofee95SE]

bump, Nissan strout bar is now $80 shipped.

[Loofee95SE]

Back to 1st page, Strout bar and turbo kit still for sale. C

[Loofee95SE]

bump. need to sell, so please make me an offer. C

[khmerguy618]

YGM meng.

msg

[Loofee95SE]

YGM meng.

msg
pm replied, C

[mrmephistopheles]

too many bumps. Read the rules before posting again.