ecu type for safc 2 installation

[alonroz]

Hi,
tryed to serach for the answer - didn't come up with anything.
i am trying to install the s-afc II on my silvia, but cant get the ecu type from the apexi site pdf's, none of them are correct! either the wire colors are different or they are just empty!
can anyone please tell me which diagram to use?
vehicle is a 1996 sr20det silvia s14 series 1,
ecu # is A18-E40 5704
23710 75f15
thanks in advance to all the helpers!
Alon

[eastcoastS14]

maybe some helpful info here http://www.zilvia.net/f/showthread.php?t=23870

[alonroz]

nope,
pisc aren't available anymore...
i only need to know what diagram on the apexi manual to use...
Alon

[alonroz]

ok. found the right diagram - it was a euro spec silvia (?)
started the car, ran a little rich...
mounted the ecu back in its place, and then the car just wouldn't start, and after a couple of times the ecu started making a wierd buzz sound...
checked the wires for anything exposed or damaged and didn't find anything...
anyone ever encountered that?
Alon

[johngriff]

Smell the ecu. Does it smell burnt??

[alonroz]

not at all,
if it buzzeds does it mean i coocked it? or did its fuse blew?
Alon

[alonroz]

there was a blown 7.5a fuse in the engine bay,
the buzzing has stopped but the car still won't start...

[johngriff]

what are your afm settings in the afc?

[alonroz]

4 cyl, up arrow,
2in 5out
1in 1 out
checked the z32 maf wiring cuz it sounds as if the car's trying to start when the maf's not connected,
cennections were fine...:axe:

[fliprayzin240sx]

You did follow the wiring diagram for a zenki S14 right? iirc 93-95

[alonroz]

iv'e followed the instructions of a euro spec silvia - every sensoe in the safc worked (throttle, afm, etc)