sileight_04
05-16-2007, 11:56 PM
!!!!! NEW LOWER PRICE !!!!!
i've got something you might be interested in. i have a 1992 240sx hatch back for sale that has an sr20 in it. i have so much stuff done to it that i am going to try and list as much as i can.
tein super drift coilovers w/ camber plates
tein tension rods
tein tie rods
Battle version rear upper control arms
battle version rear toe links
circuit sports sub frame bushings
Nismo motor and tranny mounts
peakboost equal length top mount turbo manifold
koyo radiator
flex-a-lite electric fans
walbro 255lph fuel pump
greddy intake manifold
s.a.r.d. 850cc injectors
aeromotive fuel pressure regulator
samco radiator hoses (with fitting for coolant temp sensor)
greddy rspl front mount intercooler
greddy type-rs blow off valve
greddy profec-b 2 boost controller
greddy 264/272 cams
greddy rocker arm stoppers
hks valves, springs, and retainers.
hks head gasket
tanabe exhaust
forged pistons and rods
apexi power-fc standalone with commander (d-jetro)
blitz turbo timer
AEM uego wideband o2 with gauge
custom 6 point roll cage
drag radials
kaaz 2way lsd
cryo treated tranny internals
pivot "sleepy eyes" headlight controller
i know that there is more that i can't think of this second but you get the jist im sure. well that is all of the mods it has, im selling it because i am assuming it has a spun a bearing (I CANNOT BE SURE OF THIS DUE TO THE FACT THAT I HAVEN'T DISASSEMBLED THE MOTOR TO BE 100% SURE, THERE ARE NO VISIBLE CRACKS OR HOLES IN THE BLOCK). i had a gt35r turbo on it and ran an 11.02 pass down here in el paso texas. now let me tell you what it doesn't come with. it has no turbo, no defi gauges (as you can kinda see in a pic), no downpipe, no harness, and no drivers seat. the reason i am selling it and not rebuilding it is because of a few reasons, they are. i have done all i can do to it, i've had a lot of fun with it and made it as fast as i possibly can, i just don't have the love and commitment to it i once did. im sure you are probably like "this guy probably want all this money for it" nope not really. i know i will never get anywhere near what i put into it (27K). i am looking to get $4,500 for it but that price is completely negotiable. you are welcome to come and take a look at it if you want and are in the el paso texas area. message me at [email protected] and let me know if you have any questions or comments.
i just noticed that people couldn't tell from the pics but it does need a paint job due to the clearcoat and some paint peeling. there is a minor dent in the passenger side rear quarter pannel low by the bumper, the little plastic mechanism that releases the gas door is messed up.
(((car is not currently running)
thank you for your time,
Jonathan
here are some older pics before the stuff was removed.
http://i102.photobucket.com/albums/m97/svs_06/Angled.jpg
http://i102.photobucket.com/albums/m97/svs_06/Engine.jpg
http://i102.photobucket.com/albums/m97/svs_06/mycar.jpg
http://i102.photobucket.com/albums/m97/svs_06/Interior.jpg
i've got something you might be interested in. i have a 1992 240sx hatch back for sale that has an sr20 in it. i have so much stuff done to it that i am going to try and list as much as i can.
tein super drift coilovers w/ camber plates
tein tension rods
tein tie rods
Battle version rear upper control arms
battle version rear toe links
circuit sports sub frame bushings
Nismo motor and tranny mounts
peakboost equal length top mount turbo manifold
koyo radiator
flex-a-lite electric fans
walbro 255lph fuel pump
greddy intake manifold
s.a.r.d. 850cc injectors
aeromotive fuel pressure regulator
samco radiator hoses (with fitting for coolant temp sensor)
greddy rspl front mount intercooler
greddy type-rs blow off valve
greddy profec-b 2 boost controller
greddy 264/272 cams
greddy rocker arm stoppers
hks valves, springs, and retainers.
hks head gasket
tanabe exhaust
forged pistons and rods
apexi power-fc standalone with commander (d-jetro)
blitz turbo timer
AEM uego wideband o2 with gauge
custom 6 point roll cage
drag radials
kaaz 2way lsd
cryo treated tranny internals
pivot "sleepy eyes" headlight controller
i know that there is more that i can't think of this second but you get the jist im sure. well that is all of the mods it has, im selling it because i am assuming it has a spun a bearing (I CANNOT BE SURE OF THIS DUE TO THE FACT THAT I HAVEN'T DISASSEMBLED THE MOTOR TO BE 100% SURE, THERE ARE NO VISIBLE CRACKS OR HOLES IN THE BLOCK). i had a gt35r turbo on it and ran an 11.02 pass down here in el paso texas. now let me tell you what it doesn't come with. it has no turbo, no defi gauges (as you can kinda see in a pic), no downpipe, no harness, and no drivers seat. the reason i am selling it and not rebuilding it is because of a few reasons, they are. i have done all i can do to it, i've had a lot of fun with it and made it as fast as i possibly can, i just don't have the love and commitment to it i once did. im sure you are probably like "this guy probably want all this money for it" nope not really. i know i will never get anywhere near what i put into it (27K). i am looking to get $4,500 for it but that price is completely negotiable. you are welcome to come and take a look at it if you want and are in the el paso texas area. message me at [email protected] and let me know if you have any questions or comments.
i just noticed that people couldn't tell from the pics but it does need a paint job due to the clearcoat and some paint peeling. there is a minor dent in the passenger side rear quarter pannel low by the bumper, the little plastic mechanism that releases the gas door is messed up.
(((car is not currently running)
thank you for your time,
Jonathan
here are some older pics before the stuff was removed.
http://i102.photobucket.com/albums/m97/svs_06/Angled.jpg
http://i102.photobucket.com/albums/m97/svs_06/Engine.jpg
http://i102.photobucket.com/albums/m97/svs_06/mycar.jpg
http://i102.photobucket.com/albums/m97/svs_06/Interior.jpg