johngriff
04-27-2007, 10:40 PM
Haha, the final stretch. After this, Most of this stuff is getting junked. Moving In TWO weeks and this needs to GO so....
**EXCEPT FOR OVERSIZE ITEMS, SHIPPING IS $9**
This is a "Flat Rate Box Sale", I will be shipping almost everything Via Flat Rate USPS Boxes, with Delivery Confirmation. The Price is $9. So if the Item you would like, or combination of items will fit inside one of these two parameters:
"Slim Box" 12" x 14" x 3 3/4": I have fit flywheels and clutches in these boxes.
"Short and Fat Box": 11 1/2" x 5 3/4" x 8 3/4" Fits Most Items
If your item is smaller than the size above, can be broken down to fit into the size above, or combination of items fit the sizes above, shipping will be $9.
For Items Larger than those sizes, Email me a request on shipping.
[email protected]
Lets get some PICS!
http://www.rpsportengineering.com/images/garage/g02.jpg
Intake Mani $15
http://www.rpsportengineering.com/images/garage/g04.jpg
CA18 stock mani $10
http://www.rpsportengineering.com/images/garage/g05.jpg
used sr pressure plate $10
http://www.rpsportengineering.com/images/garage/g07.jpg
stock a/c line. $10
http://www.rpsportengineering.com/images/garage/g10.jpg
drivers s13 upright $20
http://www.rpsportengineering.com/images/garage/g14.jpg
Sr Water Line sold
http://www.rpsportengineering.com/images/garage/g15.jpg
SOHC PS RES, (Can mount on DR side, not pretty)$10
http://www.rpsportengineering.com/images/garage/g16.jpg
SR Intake Manifold Brace $10
http://www.rpsportengineering.com/images/garage/g17.jpg
SR Fuel Line Piece $5
http://www.rpsportengineering.com/images/garage/g18.jpg
DIN Cell Holder Trim (under stereo s13), $10
http://www.rpsportengineering.com/images/garage/g19.jpg
trans mount (2), $10 each!
http://www.rpsportengineering.com/images/garage/g20.jpg
SR Water line for turbo (s13), connects heater hose to turbine hose around back of block ($5)
S13 Front Strut Upper mounts, fair condition $10 set (does not split)
http://www.rpsportengineering.com/images/garage/g24.jpg
http://www.rpsportengineering.com/images/garage/g25.jpg
http://www.rpsportengineering.com/images/garage/g26.jpg
SOHC Spark Plug wire grab bag, $5
http://www.rpsportengineering.com/images/garage/g28.jpg
SR BellHousing Gasket/Flex Plate ($20)
http://www.rpsportengineering.com/images/garage/g33.jpg
shifter $10
http://www.rpsportengineering.com/images/garage/g35.jpg
S13 4 Lug Front Good condition $10
http://www.rpsportengineering.com/images/garage/g36.jpg
Batter Cable, $5
http://www.rpsportengineering.com/images/garage/g39.jpg
Ka24E injectors $20
http://www.rpsportengineering.com/images/garage/g40.jpg
KA24E Dist Rubber Boot cover $5
http://www.rpsportengineering.com/images/garage/g42.jpg
SR Water Return lines (turbine x2) sold, SR Fuel line $5
http://www.rpsportengineering.com/images/garage/g43.jpg
fender brace $5, Clutch Forks SR $10 each, sr alt support $5, SR Chain Guard $10(between the cams, under valve cover)
http://www.rpsportengineering.com/images/garage/g47.jpg
SR Hot Water Neck, $10.
http://www.rpsportengineering.com/images/garage/g49.jpg
SR Oil Dipstick with tube $25 shipped
http://www.rpsportengineering.com/images/garage/g50.jpg
SR Fuel Rail SOLD
http://www.rpsportengineering.com/images/garage/g52.jpg
$10 Each
http://www.rpsportengineering.com/images/garage/g53.jpg
sr knock sensor $20, Fuel rail rubber washer/grommits $10
http://www.rpsportengineering.com/images/garage/g54.jpg
SR Under intake mani coolant lines, w/head kneck fitting, and sensors $15 (1 more available)
http://www.rpsportengineering.com/images/garage/g56.jpg
SR intake mani w/IACV and subharness, NO THROTTLE BODY, $50 Shipped
http://www.rpsportengineering.com/images/garage/g60.jpg
KA24E Harness (missing some connectors) $20
http://www.rpsportengineering.com/images/garage/g61.jpg
SR Exhaust CAM with Cam Gear $30
http://www.rpsportengineering.com/images/garage/g64.jpg
CA18DET Coil Park Harness, Was hardwired, removed, functional ($10)
http://www.rpsportengineering.com/images/garage/g68.jpg
3 SR20DET cams, $20, 2 shifters, $10 Each.
http://www.rpsportengineering.com/images/garage/g71.jpg
grab bag, $10
http://www.rpsportengineering.com/images/garage/g72.jpg
wastegate, $20, tube $3
http://www.rpsportengineering.com/images/garage/g75.jpg
lower power harness, unwrapped, good condition, $5
http://www.rpsportengineering.com/images/garage/g76.jpg
clutch fan $10, brake rotors $10 each (20 for both)
http://www.rpsportengineering.com/images/garage/g77.jpg
SOHC harness (cut), $20, SR Oil Pickup $10, SR waterpump pulley $10
http://www.rpsportengineering.com/images/garage/g78.jpg
cruise control, sold
Call out what you want in the thread, pay via paypal ([B][email protected]), and post that you paid. make sure to send a detailed email with your paypal payment, of what you want. Make sure to add $9 shipping, to every volume that exceeds one of the previously stated sizes..
[B]Email questions, or aim
[email protected]
AIM: RPSport John
**EXCEPT FOR OVERSIZE ITEMS, SHIPPING IS $9**
This is a "Flat Rate Box Sale", I will be shipping almost everything Via Flat Rate USPS Boxes, with Delivery Confirmation. The Price is $9. So if the Item you would like, or combination of items will fit inside one of these two parameters:
"Slim Box" 12" x 14" x 3 3/4": I have fit flywheels and clutches in these boxes.
"Short and Fat Box": 11 1/2" x 5 3/4" x 8 3/4" Fits Most Items
If your item is smaller than the size above, can be broken down to fit into the size above, or combination of items fit the sizes above, shipping will be $9.
For Items Larger than those sizes, Email me a request on shipping.
[email protected]
Lets get some PICS!
http://www.rpsportengineering.com/images/garage/g02.jpg
Intake Mani $15
http://www.rpsportengineering.com/images/garage/g04.jpg
CA18 stock mani $10
http://www.rpsportengineering.com/images/garage/g05.jpg
used sr pressure plate $10
http://www.rpsportengineering.com/images/garage/g07.jpg
stock a/c line. $10
http://www.rpsportengineering.com/images/garage/g10.jpg
drivers s13 upright $20
http://www.rpsportengineering.com/images/garage/g14.jpg
Sr Water Line sold
http://www.rpsportengineering.com/images/garage/g15.jpg
SOHC PS RES, (Can mount on DR side, not pretty)$10
http://www.rpsportengineering.com/images/garage/g16.jpg
SR Intake Manifold Brace $10
http://www.rpsportengineering.com/images/garage/g17.jpg
SR Fuel Line Piece $5
http://www.rpsportengineering.com/images/garage/g18.jpg
DIN Cell Holder Trim (under stereo s13), $10
http://www.rpsportengineering.com/images/garage/g19.jpg
trans mount (2), $10 each!
http://www.rpsportengineering.com/images/garage/g20.jpg
SR Water line for turbo (s13), connects heater hose to turbine hose around back of block ($5)
S13 Front Strut Upper mounts, fair condition $10 set (does not split)
http://www.rpsportengineering.com/images/garage/g24.jpg
http://www.rpsportengineering.com/images/garage/g25.jpg
http://www.rpsportengineering.com/images/garage/g26.jpg
SOHC Spark Plug wire grab bag, $5
http://www.rpsportengineering.com/images/garage/g28.jpg
SR BellHousing Gasket/Flex Plate ($20)
http://www.rpsportengineering.com/images/garage/g33.jpg
shifter $10
http://www.rpsportengineering.com/images/garage/g35.jpg
S13 4 Lug Front Good condition $10
http://www.rpsportengineering.com/images/garage/g36.jpg
Batter Cable, $5
http://www.rpsportengineering.com/images/garage/g39.jpg
Ka24E injectors $20
http://www.rpsportengineering.com/images/garage/g40.jpg
KA24E Dist Rubber Boot cover $5
http://www.rpsportengineering.com/images/garage/g42.jpg
SR Water Return lines (turbine x2) sold, SR Fuel line $5
http://www.rpsportengineering.com/images/garage/g43.jpg
fender brace $5, Clutch Forks SR $10 each, sr alt support $5, SR Chain Guard $10(between the cams, under valve cover)
http://www.rpsportengineering.com/images/garage/g47.jpg
SR Hot Water Neck, $10.
http://www.rpsportengineering.com/images/garage/g49.jpg
SR Oil Dipstick with tube $25 shipped
http://www.rpsportengineering.com/images/garage/g50.jpg
SR Fuel Rail SOLD
http://www.rpsportengineering.com/images/garage/g52.jpg
$10 Each
http://www.rpsportengineering.com/images/garage/g53.jpg
sr knock sensor $20, Fuel rail rubber washer/grommits $10
http://www.rpsportengineering.com/images/garage/g54.jpg
SR Under intake mani coolant lines, w/head kneck fitting, and sensors $15 (1 more available)
http://www.rpsportengineering.com/images/garage/g56.jpg
SR intake mani w/IACV and subharness, NO THROTTLE BODY, $50 Shipped
http://www.rpsportengineering.com/images/garage/g60.jpg
KA24E Harness (missing some connectors) $20
http://www.rpsportengineering.com/images/garage/g61.jpg
SR Exhaust CAM with Cam Gear $30
http://www.rpsportengineering.com/images/garage/g64.jpg
CA18DET Coil Park Harness, Was hardwired, removed, functional ($10)
http://www.rpsportengineering.com/images/garage/g68.jpg
3 SR20DET cams, $20, 2 shifters, $10 Each.
http://www.rpsportengineering.com/images/garage/g71.jpg
grab bag, $10
http://www.rpsportengineering.com/images/garage/g72.jpg
wastegate, $20, tube $3
http://www.rpsportengineering.com/images/garage/g75.jpg
lower power harness, unwrapped, good condition, $5
http://www.rpsportengineering.com/images/garage/g76.jpg
clutch fan $10, brake rotors $10 each (20 for both)
http://www.rpsportengineering.com/images/garage/g77.jpg
SOHC harness (cut), $20, SR Oil Pickup $10, SR waterpump pulley $10
http://www.rpsportengineering.com/images/garage/g78.jpg
cruise control, sold
Call out what you want in the thread, pay via paypal ([B][email protected]), and post that you paid. make sure to send a detailed email with your paypal payment, of what you want. Make sure to add $9 shipping, to every volume that exceeds one of the previously stated sizes..
[B]Email questions, or aim
[email protected]
AIM: RPSport John