jrmiller84
04-24-2007, 09:57 AM
My swap is nearing an end so I'm trying to get rid of some left over stuff. I have an entire KA24E motor set with parts to pull from, all of which worked when the motor was pulled. I've had some people ask about the injectors but they looked to be slightly cracked, so I'm not offering them. Here is a short list of some things I'm willing to ship off the top of my head:
Starter (Rebuilt)
AC Compressor
AC Condenser
Stock intake piping (no cracks!)
Radiator
Intake Manifold
Exhaust Manifold
Anything else relatively small you can think of
I'm willing to let any one of those parts go for 25$ shipped. The KA24E motor and transmission are up for grabs, but as I've said before, I don't have the resources or time to manage a freight pickup for them. If anyone wants to pick them up, I'd be willing to get rid of both the motor and tranny for 75$. It ran fine before it was pulled but I have taken the tranny sensors off of the motor to use with the SR. The motor had over 200k miles before it was pulled and seemed to have a small oil leak, I had to put a little less than a quart in every month or two. I don't want to misrepresent the motor at all so if you have any questions PLEASE ask. I can't think of any quirks with it other than the tranny sensors missing and the mileage. I am willing to part with them separately for a cheaper price.
If you would like pictures of the motor, visit http://s78.photobucket.com/albums/j83/jrmiller84/Project%20240/?start=all (http://s78.photobucket.com/albums/j83/jrmiller84/Project%20240/?start=all)
There are quite a few images towards the bottom of the KA. Also, if you want pictures of the parts, just ask. I don't have any of each individual part so just let me know and I'll take some next time I'm out there. Thanks everyone! :bigok:
EDIT: The engine hoist and load leveler have been sold!
Starter (Rebuilt)
AC Compressor
AC Condenser
Stock intake piping (no cracks!)
Radiator
Intake Manifold
Exhaust Manifold
Anything else relatively small you can think of
I'm willing to let any one of those parts go for 25$ shipped. The KA24E motor and transmission are up for grabs, but as I've said before, I don't have the resources or time to manage a freight pickup for them. If anyone wants to pick them up, I'd be willing to get rid of both the motor and tranny for 75$. It ran fine before it was pulled but I have taken the tranny sensors off of the motor to use with the SR. The motor had over 200k miles before it was pulled and seemed to have a small oil leak, I had to put a little less than a quart in every month or two. I don't want to misrepresent the motor at all so if you have any questions PLEASE ask. I can't think of any quirks with it other than the tranny sensors missing and the mileage. I am willing to part with them separately for a cheaper price.
If you would like pictures of the motor, visit http://s78.photobucket.com/albums/j83/jrmiller84/Project%20240/?start=all (http://s78.photobucket.com/albums/j83/jrmiller84/Project%20240/?start=all)
There are quite a few images towards the bottom of the KA. Also, if you want pictures of the parts, just ask. I don't have any of each individual part so just let me know and I'll take some next time I'm out there. Thanks everyone! :bigok:
EDIT: The engine hoist and load leveler have been sold!