Boost pressure sensor and Wastegate valve control solenoid need?

[youngmanvr4]

Are the factory boost pressure sensor and wastegate valve control solenoid need?
I know without the WVCS it will be a little more laggy but is it needed? And the boost pressure sensor sends a signal to the ECU to control boost "precisely" but is it needed?

[Z U L8R]

no. only the mechanical components are needed. you just need the actuator, the arm that opens the wastegate flap, and a vacuum line running from a boost source to the actuator's nipple. g/l =]

[youngmanvr4]

And the boost pressure sensor isn't needed either?

[Z U L8R]

correct, not needed

[youngmanvr4]

Ok sweet.

What the effects of not using it?

[Z U L8R]

no fuel cut when you turn your boost up...*shrug...it'll fuel cut when you're doing 140 in 5th gear but that's the speed limiter not from the sensor....IT'S GAAAHBIJ!! BUKAKE!! @@

[youngmanvr4]

So its actually best to not have it?

[DoriftoPnoy]

Yeup not needed. I know I don't have em so I removed the connectors and wires from my harness when I redid it. What a pain that was.... stupid previous owner....