Wheel fitment BLUES

[KOUKIboy]

What up Silvia lovers, I have an opportunity of a life time to buy some cheap ass G53 OEM wheels, HP with a polished lip, they look really tight. But they are 19's with an offset of 35 and 8.5J rim with. I have a S14, and I was wondering if these will fit under the wheel wells, and also if I will have to pull or roll the fenders to make em fit. I never seen a S14 with 19's if you have a pic of a silvia rolling in 19's that Ill cool. Thanks.

[johngriff]

Even with a taller wheel, you can simply reduce sidewall to force fitment, that offset is gross, so you will probably want spacers, and your end spacer choice is going to determine pull/roll.

[youngmanvr4]

Depending on what tire size you use, I would say a 225/35/19. With a 225/35 it will be 5mm closer into the coilover which is acceptable for s14's. It will push in 15mm's farther out towards the fender which you really dont have to roll the fenders til about 34-38mm (past stock sizes).

With a 215 is square on a 8.5 wheel so 225 will give you just a little extra. If you wanted a wider tire you could get a 235/35 (or 30) which would be 10mm closer to the coilover and 20mm farther towards the fender.