PDA

View Full Version : Z32 Brake swapp ROTORS


KOUKIboy
04-20-2007, 05:56 PM
What up fellow Zilvians, Im a newbie in this brake swapp delio, I recently purchased a pair of Z32 calipers, and I want to buy some project U Rotors (5 lug) but I wans wodering if the S14 Rotors (Project U) will fit the Z32 calipers, or will I have to buy the 300ZX calipers, because they both look the same to me, but I know that apples are not the same as oranges.
Thanks for your help, and KEEP IT JDM.

GSXRJJordan
04-20-2007, 06:01 PM
z32 calipers = z32 rotors.

You'd better know whether you got 26mm or 30mm calipers though.

Turbo = 30mm, NA = 26mm.

It's Project Mu (that's a lowercase Greek character, means coefficient of friction in physics).

This has been covered countless times, and is accessable through the [SEARCH] button.

Keep it JDM?

93 240 s13
04-20-2007, 06:06 PM
hurry for z23 conversion i did mine last week
its hard to stop w/o locking the fronts up haha

04-20-2007, 06:10 PM
You mean these? http://www.mynismo.com/products/?id=4076

04-20-2007, 06:12 PM
hurry for z23 conversion i did mine last week
its hard to stop w/o locking the fronts up haha


Okay, sounds to me your brake bias is really off whack, did you switch out the master cylinder for a Z32 unit as well? It should not lock the fronts up unless you are purposely slamming on the brakes.

GSXRJJordan
04-20-2007, 06:14 PM
Ugh Eddie, change the title on that Project Mu page... it says Project U also!

"It's hard to stop without locking up the fronts" means you have:
1] horrible brakes in the back
2] horrible camber in the front
3] horrible brake bias (wrong M/C for your calipers)
4] typical internet exaggeration syndrome
5] unbelievably bald front tires
6] any combination of the above

KOUKIboy
04-20-2007, 06:43 PM
Yeah I got 26mm calipers, which Project MU Rotors should I get.
Thanks.

93 240 s13
04-20-2007, 07:15 PM
i have not changed the m/c yet so i suppose thats why :(
anyone know the price for the z32 one
and is there a difference in the TT/NA master's?

the rear brakes are all stock with hawk HP+ pds
actually HP+ all around.

OptionZero
04-20-2007, 07:51 PM
S_E_A_R_C_H mother fuckers

04-20-2007, 09:41 PM
Ugh Eddie, change the title on that Project Mu page... it says Project U also!

"It's hard to stop without locking up the fronts" means you have:
1] horrible brakes in the back
2] horrible camber in the front
3] horrible brake bias (wrong M/C for your calipers)
4] typical internet exaggeration syndrome
5] unbelievably bald front tires
6] any combination of the above


Haha i didnt add that part, someone who used to work here did...lol

04-20-2007, 09:45 PM
i have not changed the m/c yet so i suppose thats why :(
anyone know the price for the z32 one
and is there a difference in the TT/NA master's?

the rear brakes are all stock with hawk HP+ pds
actually HP+ all around.


Z32 masters are about $200 for a new oem Nissan one.

04-20-2007, 09:46 PM
Yeah I got 26mm calipers, which Project MU Rotors should I get.
Thanks.


You are VERY limited in rotor selection if you have the 26mm units, you might find a good deal on ebay somewhere.

Inland180
04-21-2007, 11:32 AM
I don't think project Mu makes rotors for 26mm z32 caliper.

04-22-2007, 03:44 AM
I don't think project Mu makes rotors for 26mm z32 caliper.

no they dont make them, hence the "limited selection part" :-/