Map sensor?

[gotta240]

Does the a 96 240sx OBD2 have a map sensor? If so, where is it and where can i get one!?!?

Also, has anyone ever heard of a code 132 or 1302? I know i posted it in another thread as well, but i'm getting desperate... I have a track day tomorrow along with 6 hours driving there and back...
please help!! i'm begging.

[seven.62]

no the 240sx doent use a map sensor, maybe you are confusing it with a maf sensor which is what your car uses. you can find it by following the intake piping till you see where something plugs in, i belive it is right after the intake filter box

[gotta240]

I know exactly what the maf is... I replaced 3 of them and still get a

"faulty air/fuel metering device" code from a shitty scanner...

After doing a little research i believe the OBD2 240's DO have a map sensor.. Not sure where it's located, but i think it has one.... Anyone verify?

Thanks

[LigouriRd]

Better late than never...
Yes, All OBD2 240SX's have a map (absolute pressure) sensor, its not for fuel metering its part of the emissions system.
Here's were it is:http://img216.imageshack.us/img216/2329/fsmec216jj.jpg
Try your local stealership or http://www.midwaypartsteam.com/ for a replacement.

I couldn't find any reference to a GST code or mil code 1302 or 132 but here are a couple of close ones:
P0130 (mil code 0303/0307) Front heated oxygen sensor/Closed loop control
P1105 (mil code 0302) Map/Baro switch solenoid valve
P1320 (mil code 0201) Ignition signal circuit.

In the future it would be best to forego the sheety scanner and just use the diagnostic pot on the side of the ecu.

[projectRDM]

no the 240sx doent use a map sensor, maybe you are confusing it with a maf sensor which is what your car uses. you can find it by following the intake piping till you see where something plugs in, i belive it is right after the intake filter box

Don't post if you have no clue what you're talking about, it only confuses lesser intelligent people.