FS/FT: S13 Ka24De Valve Cover Powder Coated Black w/ "Brushed" Lettering

[OperationSr20]

Up for sale is the Valve Cover that I literally just received from UPS about 30 minutes ago. I purchased it from a forum member, but I just figured out I need some other parts for my Hatch & well needs are more important then wants at the moment. The Valve Cover was Powder Coated by his friend who does all sorts of items and was Clear Coated. After Powder Coated he installed it on his Coupe's Ka24De, while it was removed for timing issues, but he stated that the Valve Cover was not driven on while installed. This is a S13 Ka24De Valve Cover, which is applicable for years 1991-1994. S14 Ka24De Engines, 1995-1998, does differ from the S13's and will not work for them. The Valve Cover is Powder Coated Black w/ "Brushed" Lettering & as stated, is Clear Coated.

There are a couple imperfections with the Valve Cover. 1) There is a scratch through the Clear Coat of the Valve Cover & is only visable when hit by light at certain angles. I put my lamp right next to it & purposely got it in the picture to make sure there is no discrepencies with the sale. 2) In the top left corner of the Cover there is a small "chip" though the Powder Coating, it is about the size of this "0". 3) There are minor scratchs on the back of the Cover which, when installed, will probably not even be visable. Honestly to the naked eye, from standard viewing range, the Valve Cover probably won't look out of the ordinary.

Along with the Valve Cover you will also receive an Oil Cap & New Valve Cover Gasket, which was also included in my purchase.

http://i10.photobucket.com/albums/a143/Xx_Eclipsekid_xX/ValveCover2013.jpg

Valve Cover: Sold!!! Sold!!! Sold!!!

Contacts:
AIM: MidnightSkyline7
Email/Yahoo/MSN: [email protected]

[OperationSr20]

Open to offers folks. I might consider trades, but am really looking for cash. Whatever you have, toss it out to me, Thanks.

Keep in mind, an un-used Valve Cover Gasket is included in the sale, a pretty good deal considering TRG Quoted me a total of $95.00 just to get my Valve Cover Powder Coated, exactly like this including Clear Coat & Shipping both ways. This is already $25.00 less then that plus Oil Cap & an Un-used Valve.

Trades can include anything that can benefit my S13 Ka24De Hatch. I do not need any stock parts... Well I take that Back... I need a Tannou Cover, Chuki Driver Side Fender (Only Black), Chuki Fender Extenders (Only Black) & Dash (Only Black). Throw out whatever else you might have, this is about the price of a Megan C-Pillar Bar, would take one of those, anything performance wise really, just let me know.

[OperationSr20]

Start of the week Bump...

[OperationSr20]

Thread's Final Bump...