Rays extended lugs

[ni$$an_2fortysx]

Okay............so Im Thinking About Purchasing Some Of Rays Extended Lugs For A 92 Fastback, But Im Getting So Many Answers To As They Will Fit Or Not!

What Is The Real Deal?

Does It Fit Or Does It Not?

Is There Anything Needed Done To The Studs?

*anyone That Could Give Advice Will Be Greatly Appreciated*

[ThatGuy]

Stop typing with the CAPS LOCK button on!

[S13Dreamer]

You're talking about the Duranuts right? If so, I don't see why it wouldn't fit. I have them and they're fine. I've used them with the stock wheels and aftermarket. It never gave me an issue. Just make sure you get the correct thread pitch.

[arkive43]

Just make sure you get the correct thread pitch.




end thread/ thanx....

[chmercer]

get lugnuts that wont strip out and dont cost 100$

[Ian]

just weld your wheels to the hubs...done and done...forever

[crazyikimasho]

get lugnuts that wont strip out and dont cost 100$

agreed. Is there a particular reason you wanted these?

[chmercer]

^^^ theyre blue

people know they cost 100$

possibly some delusions of performance gain from .02 ounce weight savings

did i miss anything

[CoasTek240]

for real those seems awefully pricey for extended lugs. whats wrong with the nismo ones. Maybe i got a steal, but i bought mine new from some kid for $40.

I need to install them cuz the ones on my 25mm koyei spacers are too short. I have GTO/attain hubs and stock Z32 hubs, and was inteding to install the nismo studs on them, but now i need to install them on the spacers. if ppossible

[chmercer]

ah i thought he meant nuts. maybe he means studs. if you want studs 10 moroso 10 arp is 40$ total new and are much better than nismo. there is a thread with the part numbers on here if somebody wants to search.

[ronmcdon]

about wheel studs, i think here is the link. really good writeup, directions and overall info; they were moroso studs iirc purchased via summit racing. really wish i could have found that thread before i got the more costly arp studs
http://www.zilvia.net/f/showthread.php?t=121418&highlight=lug+studs
http://store.summitracing.com/egnsearch.asp?Ntk=KeywordSearch&DDS=1&Ntt=MOR%2D46160&x=40&y=16&N=+115&searchinresults=false

you can get arp studs, although they're not cheap. I got a set through splparts for my s14, and it came out to be around $120-$130. Had i known you could have gotten them for only $40, I would have done more research :P
http://www.splparts.com/Parts/Universal/Exterior/Wheels/accessories/default.htm

[A Spec Products]

Yes, as stated, needs to be pitch 12x1.25 (Nissan)

Fits on aftermarket wheels with the proper taper

On stock studs you have no problem. With extended studs it depends on length of studs, but most likely will not fit, better to get an open ended in that case.

[kensreliableb18b]

i think he's talking about these:

http://www.zilvia.net/f/showthread.php?t=139383

nissan pitch n ull be cherry

[A Spec Products]

i think he's talking about these:

http://www.zilvia.net/f/showthread.php?t=139383

nissan pitch n ull be cherry

Yeah, if it matters I have black extended in stock

Rays lugs are hard to keep in stock

[skate07]

just weld your wheels to the hubs...done and done...forever

IM FEELIN THAT ^^^

for sure, it makes sense

[chmercer]

about wheel studs, i think here is the link. really good writeup, directions and overall info; they were moroso studs iirc purchased via summit racing. really wish i could have found that thread before i got the more costly arp studs
http://www.zilvia.net/f/showthread.php?t=121418&highlight=lug+studs
http://store.summitracing.com/egnsearch.asp?Ntk=KeywordSearch&DDS=1&Ntt=MOR%2D46160&x=40&y=16&N=+115&searchinresults=false

you can get arp studs, although they're not cheap. I got a set through splparts for my s14, and it came out to be around $120-$130. Had i known you could have gotten them for only $40, I would have done more research :P
http://www.splparts.com/Parts/Universal/Exterior/Wheels/accessories/default.htm

late model gm arp studs fit s14 rear hubs, 10 dollars per 5 pack. come in 2.5 and 3.5 inch. front needs moroso studs. the arp studs take 12x1.5 nuts, moroso i forget the measurment like 7/16" nuts iirc? w/e

[kuruptR]

screw those get these.
http://www.aj-racing.com/catalog/product.php?productid=1133&cat=6&page=1
http://www.aj-racing.com/catalog/files/products/images/t1r/wheels/nuts.jpg

only about $520USD

[ronmcdon]

lol, if i could afford that much for lugnuts i wouldn't even bother driving a 240.

[chmercer]

i wonder how titanium heat expansion compares to steel wheel studs

i will stick with steel lugnuts since i can torque them to 100 and not worry about breakage

[clean_s14 (VIP ed.)]

the lug nuts to end all lug nuts, Kics Project R40. def. worth it for the price but the 5zigen pro racers come a close second in my opinion bein' that i'm somewhat biased since i have em'...