Rittmeister
04-13-2007, 04:40 PM
First: Kogaku water pump pulley. Fitment for S13 or S14 SR20DET - I assume it won't fit a KA. This is the same pulley that TougeFactory is selling. Mine is no longer anodized but has been powdercoated a deeper, royal blue color. It's designed to underdrive the water pump slightly, to avoid cavitating at higher RPMs.
http://i25.photobucket.com/albums/c88/kwstine1/P1010019.jpg
http://i25.photobucket.com/albums/c88/kwstine1/P1010018.jpg
http://i25.photobucket.com/albums/c88/kwstine1/P1010017.jpg
The powdercoater was a bit rough removing the anodizing, so the front of the pulley has some very shallow gouges in it. I tried to show them in the pics but in the interest of disclosure I wanted to mention it. It doesn't affect the operation of the pulley at all, and isn't too noticeable when it's installed.
TougeFactory is selling this for about $100. I would like to get $80 for this, OBO. It was used only for a few days, and frankly I'm only selling it because I need a bit of cash more than the pulley, for my mostly street-driven car.
Second: Circuit Sports coolant overflow tank. Fitment for S13 only. These are polished bare aluminum; I had mine powdercoated in a color called "almost chrome" which looks a lot like polished bare aluminum, but won't oxidize. The sight glass melted during the powdercoating, which is why there's a clear tube in the picture; I have since replaced the tube with 90-degree brass fittings from Ohio Hydraulics, and a straight tube, so it looks a lot better.
http://i25.photobucket.com/albums/c88/kwstine1/CStank2.jpg
This also sells new for about $100, and again I'd like to get around $80. Reason for selling, see above.
If anyone wants both parts I'd do $150, and that IS firm.
Thanks!
Please PM if interested. I take paypal (NO credit cards), cash, and money order. Buyer pays shipping.
http://i25.photobucket.com/albums/c88/kwstine1/P1010019.jpg
http://i25.photobucket.com/albums/c88/kwstine1/P1010018.jpg
http://i25.photobucket.com/albums/c88/kwstine1/P1010017.jpg
The powdercoater was a bit rough removing the anodizing, so the front of the pulley has some very shallow gouges in it. I tried to show them in the pics but in the interest of disclosure I wanted to mention it. It doesn't affect the operation of the pulley at all, and isn't too noticeable when it's installed.
TougeFactory is selling this for about $100. I would like to get $80 for this, OBO. It was used only for a few days, and frankly I'm only selling it because I need a bit of cash more than the pulley, for my mostly street-driven car.
Second: Circuit Sports coolant overflow tank. Fitment for S13 only. These are polished bare aluminum; I had mine powdercoated in a color called "almost chrome" which looks a lot like polished bare aluminum, but won't oxidize. The sight glass melted during the powdercoating, which is why there's a clear tube in the picture; I have since replaced the tube with 90-degree brass fittings from Ohio Hydraulics, and a straight tube, so it looks a lot better.
http://i25.photobucket.com/albums/c88/kwstine1/CStank2.jpg
This also sells new for about $100, and again I'd like to get around $80. Reason for selling, see above.
If anyone wants both parts I'd do $150, and that IS firm.
Thanks!
Please PM if interested. I take paypal (NO credit cards), cash, and money order. Buyer pays shipping.