tErbo b00st
04-12-2007, 07:09 PM
I'm selling my shimmed VLSD diff. If your not sure what shimming is, I put an extra shim next to the viscous coupler inside the differential to add pressure. This in turn makes the diff lock up MUCH harder. I believe I added a 1.5mm shim.
In my experience it acts very similar to a 1.5 way clutch type, with out the clunking. You won't be dissapointed unless you really really really want a real clutch type.
Only problem is the backlash is not properly set, its close, but it does whine a bit. I drove it for a little bit like this, not long enough to do any damage.
$400 if you want me to set the backlash before sale
$325 if you want to take care of it.
Comes with axles.
In my experience it acts very similar to a 1.5 way clutch type, with out the clunking. You won't be dissapointed unless you really really really want a real clutch type.
Only problem is the backlash is not properly set, its close, but it does whine a bit. I drove it for a little bit like this, not long enough to do any damage.
$400 if you want me to set the backlash before sale
$325 if you want to take care of it.
Comes with axles.