hks evc iv (japan version)

[dori2 s13coupe]

does anyone know how to use it? im willing to pay for some help.

[32rulz]

i do. Dont do a learning mode run. All can be done in your Garage.

The best way to set this unit up is by first clearing it out. That is by having the unit off and hold down Mod, Alt and SCB button ( make sure the switch in the back is on SW for internal waste gate)till you hear a audiable beep. Now the unit is cleared. Next turn the knob to the left till you see 0.00. Hit SBC and turn the knob to the right till you see 7.25. Then hit SCB. Now you should be in the high boost setting mode. Dial in your high then click on Alt and dial in your low. Now click on Mod and dial in your offset witch should be at 105-110 for the high then click on Alt and set your low offset witch should be the same 105-110. Now click on Mod and set your Scramble boost settings witch should be at .05 more then your high. Example( high is 1.05 then scramble be 1.1) Click on Mod and set the scramble boost time. I set mine for 7 seconds. Click on Mod and set your Warning boost settings. I usually set it at 1.15. Now your going to have to lock the unit after your programs. This is by holding down Mod button and switch the Bypass switch in the back from SW to PO and then release the Mod button and switch the switch in the back to SW. This locks the offset. Now your going to have to lock the Inhibit mode too. This is by Holding down the Alt button and switch the switch in the back from SW to PO then releasing the Alt button and switch the switch back to SW. Now to turn inhibit mode off hold down SCB button instead of alt and do the same as above.All this time make sure that the ignition key is in the on positon. Email me if you have problems. I am a pro at this EVCIV. Took me 2 years to figure this damn thing out and now it is the baddest unit in my mind. 0 creep boost.

PS, no need to pay me.

[dori2 s13coupe]

thanks for your help and quick reply but i have the japanese version
http://www.hks-power.co.jp/faq/evc/img/img_4.jpg

you probably have this one
http://www.9secondracing.com/images/prods/thumb/HKS-Electronic-Valve-4503-RA009A.jpg

i dont have that dam alt button.

im getting warmer to getting it figuired out but if anyone could translate this pdf manual, it would be great for me and for future users.

http://www.hks-power.co.jp/faq/evc/img/evc_4_kaku.pdf

[32rulz]

yeah i didnt know they have a japan version, sorry cant help you man.

[projectRDM]

thanks for your help and quick reply but i have the japanese version
http://www.hks-power.co.jp/faq/evc/img/img_4.jpg

you probably have this one
http://www.9secondracing.com/images/prods/thumb/HKS-Electronic-Valve-4503-RA009A.jpg

i dont have that dam alt button.

im getting warmer to getting it figuired out but if anyone could translate this pdf manual, it would be great for me and for future users.

http://www.hks-power.co.jp/faq/evc/img/evc_4_kaku.pdf

That's the same unit as the US model EVC V, should be the same setup procedure.

[MadScientist]

This is real simple guys... Call HKS USA and have them mail you a Manual... its not a big deal.

Peace
Drew

[garagelu]

the picture is of a hks EVC 5 boost controller. Setting the low/high boost is easy. I am still in the process of trying to figure out all the other features.

Here is the manual for it

http://www.xspeed.com.au/manuals.php