A little help here!

[uuninja]

Hey some in the NOVA area with a 1/2 inch drill. I need to borrow it for abotu 10 minutes. I have a 3/8 Drill and have a 11/12 bit to fit a 1/2 drill. Need to make a hole in my oil pan large enough for my 10 an bulk head fitting. Any one who comes through would be rewarded with a 40...or a slurpee (depending on age <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'> ).

Thanks,
Matt

[HippoSleek]

Sorry. &nbsp;Worst comes to worst, you can always purchase one from Home Depot for a day (or rent from a tool place).

BTW: WTF is your avitar?

[BEISSEN]

My mom is going to check t see if she has one she belives she does.She is going to tell me tommarrow.

[DrDubbleB]

I know that I could get my hands on one, but the problem is I'm about to leave for the night. &nbsp;If you can wait until tomorrow I can get it for you no problem. &nbsp;No slurpee required as long as you're willing to help when I turbo my KA. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/tounge.gif" border="0" valign="absmiddle" alt=':p'>

[uuninja]

Thanks one and all..there is no big rush. Some time in the next week would be cool.

Josh, If she dose that would be great.

Dr, I would be happy to help, let me know.

Hippo, eh the Avitar.... www.realultimatepower.net

http://www.msu.edu/~balocati/NinjaLaundry.jpg

sigh.....

[SaintlyCharBoy]

sorry man, i have 2, but i live on the oposite side of the world, i know that i am whoring here- but it's relatively our of character ....

i would personally recomend milwaulkee products for schtuff like this. &nbsp;i have their low rev drill, it'll break your elbow before the motor/gearing gives up

[RedSuns]

i have a unibit...it wil make any hole you want......let me know....i will pm this to you

[uuninja]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (cIvIcKILLA240style @ Aug. 04 2002,11:50)</td></tr><tr><td id="QUOTE">i have a unibit...it wil make any hole you want......let me know....i will pm this to you</td></tr></table><span id='postcolor'>
awesome! you should have my cell......let me know when you are free.

[HippoSleek]

um... &nbsp;riiiight. &nbsp;That's greaaat. &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/whatsthat.gif" border="0" valign="absmiddle" alt=':whatthe:'>

Don't hurt yourself with power tools, you freak. &nbsp; &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/hehe.gif" border="0" valign="absmiddle" alt=':hehe:'>

[gh6o6]

just buy a new chuck (the piece on the end that tightens) iirc there like 20 bucks and easy to change

[DrDubbleB]

uuninja, let me know if you got what you needed from civicKilla.

[BEISSEN]

I got the 1/2 inch bit i wil get it tomarrow from my mom i am off if you want to meet up that woulfd be fine you can use it as long as you need no rush if you lose it oh well i will just tell her i love her and that is that.Just call me at home tommarrow at 703-781-0414 if you are free matt.Or e-mail me and &nbsp;i will take it from there.hey johnathan &nbsp;are you going to reply to my e-mail hunh bud hunh hunh hahaha j/k but if you can help me out as well let me know.

[uuninja]

DR. Yeah I still need a hand with this. I will pm you with my cell.

Josh thanks for looking but I actually need a drill with a 1/2 chuck.

gh6o6, I thought about that but apparently the retaining screw is a different sive on a 3/8 as opposed to a 1/2 chuck they aren't interchangable. At least not the ones i have found.

[uuninja]

Thanks all I got what I needed, Jonathan (civickilla) hooked me up.

Thanks again.

[HippoSleek]

So did you get it in your bung hole?

[uuninja]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (HippoSleek @ Aug. 08 2002,12:15)</td></tr><tr><td id="QUOTE">So did you get it in your bung hole?</td></tr></table><span id='postcolor'>
Well it was a tight fit..... &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/blush.gif" border="0" valign="absmiddle" alt=':blush:'>

Ok I will stop.