Super Cheap SR STUFF!

[johngriff]

"OMG I cant believe I didnt have to lowball!" Sale!

Moving Locations. I have YEARS of JDM Stuff, that needs to go, no more used parts, and I am not taking this stuff with me. I also want to get rid of this stuff as quickly, and easily as possible, so there are going to be some ground rules.

**EXCEPT FOR OVERSIZE ITEMS, SHIPPING IS $9**

This is a "Flat Rate Box Sale", I will be shipping almost everything Via Flat Rate USPS Boxes, with Delivery Confirmation. The Price is $9. So if the Item you would like, or combination of items will fit inside one of these two parameters:

"Slim Box" 12" x 14" x 3 3/4": I have fit flywheels and clutches in these boxes.
"Short and Fat Box": 11 1/2" x 5 3/4" x 8 3/4" Fits Most Items

If your item is smaller than the size above, can be broken down to fit into the size above, or combination of items fit the sizes above, shipping will be $9.

For Items Larger than those sizes, Email me a request on shipping.
[email protected]

Ok, let the pics begin!

http://www.rpsportengineering.com/images/garage/g02.jpg
Intake Mani $15
http://www.rpsportengineering.com/images/garage/g03.jpg
SR Stock Mani [B]SOLD
http://www.rpsportengineering.com/images/garage/g04.jpg
CA18 stock mani $10
http://www.rpsportengineering.com/images/garage/g05.jpg
used sr pressure plate $10
http://www.rpsportengineering.com/images/garage/g06.jpg
vovlo type r intercooler (new) [B]SOLD
http://www.rpsportengineering.com/images/garage/g07.jpg
stock a/c line. $10
http://www.rpsportengineering.com/images/garage/g08.jpg
trans mount bracket SOLD
http://www.rpsportengineering.com/images/garage/g09.jpg
turbo elbo SOLD
http://www.rpsportengineering.com/images/garage/g10.jpg
drivers s13 upright $20
http://www.rpsportengineering.com/images/garage/g11.jpg
sr mani $SOLD
http://www.rpsportengineering.com/images/garage/g12.jpg
trans mount bracket SOLD
http://www.rpsportengineering.com/images/garage/g13.jpg
s13sr hotpipe compressor housing outlet. SOLD
http://www.rpsportengineering.com/images/garage/g14.jpg
Sr Water Line $5
http://www.rpsportengineering.com/images/garage/g15.jpg
SOHC PS RES, (Can mount on DR side, not pretty)$10
http://www.rpsportengineering.com/images/garage/g16.jpg
SR Intake Manifold Brace $10
http://www.rpsportengineering.com/images/garage/g17.jpg
SR Fuel Line Piece $5
http://www.rpsportengineering.com/images/garage/g18.jpg
DIN Cell Holder Trim (under stereo s13), $10
http://www.rpsportengineering.com/images/garage/g19.jpg
trans mount (2), $10 each!
http://www.rpsportengineering.com/images/garage/g20.jpg
SR Water line for turbo (s13), connects heater hose to turbine hose around back of block ($5)
http://www.rpsportengineering.com/images/garage/g21.jpg
SR(S13) Crank Pulley SOLD
http://www.rpsportengineering.com/images/garage/g22.jpg
another trans mount SOLD
http://www.rpsportengineering.com/images/garage/g23.jpg
S13 Front Strut Upper mounts, fair condition $10 set (does not split)
http://www.rpsportengineering.com/images/garage/g24.jpg
http://www.rpsportengineering.com/images/garage/g25.jpg
http://www.rpsportengineering.com/images/garage/g26.jpg
SOHC Spark Plug wire grab bag, $5
http://www.rpsportengineering.com/images/garage/g27.jpg
Shifter Boot SOLD
http://www.rpsportengineering.com/images/garage/g28.jpg
SR BellHousing Gasket/Flex Plate ($20)
http://www.rpsportengineering.com/images/garage/g29.jpg
s13 drive shaft loop (comes with half extra) SOLD
http://www.rpsportengineering.com/images/garage/g32.jpg
http://www.rpsportengineering.com/images/garage/g33.jpg
shifter $10
http://www.rpsportengineering.com/images/garage/g34.jpg
http://www.rpsportengineering.com/images/garage/g35.jpg
S13 4 Lug Front Good condition $10
http://www.rpsportengineering.com/images/garage/g36.jpg
Batter Cable, $5
http://www.rpsportengineering.com/images/garage/g37.jpg
Coolant Temp Hookup, lower hose, and sensor Ka24E SOLD
http://www.rpsportengineering.com/images/garage/g38.jpg
http://www.rpsportengineering.com/images/garage/g39.jpg
Ka24E injectors $20
http://www.rpsportengineering.com/images/garage/g40.jpg
KA24E Dist Rubber Boot cover $5
http://www.rpsportengineering.com/images/garage/g41.jpg
S13 Compressor Outlet SOLD
http://www.rpsportengineering.com/images/garage/g42.jpg
SR Water Return lines (turbine x2) $5, SR Fuel line $5
http://www.rpsportengineering.com/images/garage/g43.jpg
fender brace $5, Clutch Forks SR $10 each, sr alt support $5, SR Chain Guard $10(between the cams, under valve cover)

http://www.rpsportengineering.com/images/garage/g45.jpg
box of old sr harness (good to use for connector replacement, repair. $20
http://www.rpsportengineering.com/images/garage/g46.jpg
JDM Pulsar Power/Idle harness, perfect condition $10
http://www.rpsportengineering.com/images/garage/g47.jpg
SR Hot Water Neck, $10.

[johngriff]

http://www.rpsportengineering.com/images/garage/g49.jpg
SR Oil Dipstick with tube $25 shipped **oh hold**
http://www.rpsportengineering.com/images/garage/g50.jpg
SR Fuel Rail $15
http://www.rpsportengineering.com/images/garage/g51.jpg
JGY Customs Brace thing, SOLD
http://www.rpsportengineering.com/images/garage/g52.jpg
$10 Each
http://www.rpsportengineering.com/images/garage/g53.jpg
sr knock sensor $20, Fuel rail rubber washer/grommits $10
http://www.rpsportengineering.com/images/garage/g54.jpg
SR Under intake mani coolant lines, w/head kneck fitting, and sensors $15
http://www.rpsportengineering.com/images/garage/g55.jpg
SR oil Pan SOLD
http://www.rpsportengineering.com/images/garage/g56.jpg
SR intake mani w/IACV and subharness, NO THROTTLE BODY, $50 Shipped
http://www.rpsportengineering.com/images/garage/g57.jpg
http://www.rpsportengineering.com/images/garage/g58.jpg
USED good condition S13 SR Harness, Pulled off Running Setup $200 Shipped
http://www.rpsportengineering.com/images/garage/g59.jpg
Junk SR Harness (good for connectors) $20
http://www.rpsportengineering.com/images/garage/g60.jpg
KA24E Harness (missing some connectors) $20
http://www.rpsportengineering.com/images/garage/g61.jpg
SR Exhaust CAM with Cam Gear $30
http://www.rpsportengineering.com/images/garage/g62.jpg
another SR water line setup, with head neck, and temp sensors
http://www.rpsportengineering.com/images/garage/g63.jpg

http://www.rpsportengineering.com/images/garage/g64.jpg
CA18DET Coil Park Harness, Was hardwired, removed, functional ($10)

http://www.rpsportengineering.com/images/garage/g65.jpg
SR20DET S13 Cams, SOLD
http://www.rpsportengineering.com/images/garage/g66.jpg
sr front cover $20, KA24E Dist, $10
http://www.rpsportengineering.com/images/garage/g67.jpg
dist comes with a rubber boot.
http://www.rpsportengineering.com/images/garage/g68.jpg
3 SR20DET cams, $20, 2 shifters, $10 Each.
http://www.rpsportengineering.com/images/garage/g69.jpg
SR front cover Sold
http://www.rpsportengineering.com/images/garage/g70.jpg
motor mounts SOLD, each item $10 in picture.WATERPUMP SOLD!!!!!!!!!!!!!!
http://www.rpsportengineering.com/images/garage/g71.jpg
grab bag, $10
http://www.rpsportengineering.com/images/garage/g72.jpg
wastegate, $20, tube $3
http://www.rpsportengineering.com/images/garage/g73.jpg
valve covers (random), $30 each. BOTH Black GONE
http://www.rpsportengineering.com/images/garage/g74.jpg
coilpacks SOLD for set of 4, coilpack cover (BOTH SOLD, ca18det hotpipe (works on sr), $10, Clutch Fork $10, SR cam $10, Slave cylinder w/line $10
http://www.rpsportengineering.com/images/garage/g75.jpg
lower power harness, unwrapped, good condition, $5
http://www.rpsportengineering.com/images/garage/g76.jpg
clutch fan $10, brake rotors $10 each (20 for both)
http://www.rpsportengineering.com/images/garage/g77.jpg
SOHC harness (cut), $20, SR Oil Pickup $10, SR waterpump pulley $10
http://www.rpsportengineering.com/images/garage/g78.jpg
cruise control, $10


Call out what you want in the thread, pay via paypal ([email protected]), and post that you paid. make sure to send a detailed email with your paypal payment, of what you want. Make sure to add $9 shipping, to every volume that exceeds one of the previously stated sizes..

Email questions, or aim
[email protected]
AIM: RPSport John

[aintnobiscuit]

do you really only want $50 for that SR intake manifold? I might be interested.... talk to me on AIM... thanks John Griff

[bshotts]

S14 Speed Sensor available??

[bardabe]

god damn dude that is dirt fuckin cheap. =]

[longdy]

WOW!!!!!!! :aw: your crazy to sell them this cheap !!!!!... GL ON SALE THOUGH

[Galen]

ill take the coilpacks...

[s13silvia88]

u said fender brace? u got any pics of that? =)

[Galen]

Money sent via paypal!

[drifterdude]

Ill take one of the valve covers!

[Irukandji]

sent you a PM

[johngriff]

bardabe, you have see the stash first hand. I am over it, we are moving, and its time to start new, only selling new. What I was planning on doing was sending this out to be recycled for scrap, but i figured i could make close to same money, and hook some forum members up with some widgets.

Galen got the coilpacks, shipping tomorrow.

All p/m's replied to, like galen did, he called what he wanted, config'd his shipping using the easy to use "flat rate box method", sent his paypal, and therefore, claimed his stuff. His items will be at the post office tomorrow before 3pm!

And JUST for reference, Valve Cover Shipping is now set to the flat rate of $19 per cover via fed ex. There is three left, 1 black, 1 red with a small hole (i can weld it, or you can), and 1 painted red/black.

I shipped out a hatch full of boxes today, probably another hatch full tomorrow!

[vutony]

good stuff john - buy his shit

thanks again

[johngriff]

n1sm0r and galen;

Have your invoices and shipping certs printed, you should have tracking numbers through paypal, but i will email them to you as well. Both of your items go out before 3pm tomorrow.

[Yoshi]

Pay Pal sent!

[johngriff]

Cool yoshi,

got your invoice and packing slip ready, you are going fed ex tomorrow around noon.

[johngriff]

Everyone should be shipped out today, with the exception of yoshi, I am waiting for a picture confirmation via P/M. Everything will be out by 2-3pm, PST.

John

[gt3071r240]

I ordered a crank pulley and within hours had a tracking #:bigok:

great service highly recommended

thanks again!

[johngriff]

Thanks gt3071r240.

Just an fyi. I have been working well to keep ontop of packing and shipping everything out as soon as it shows up.

Formula D streets of Long Beach is FRI/SAT so I will not be shipping anything out tomorrow or over the weekend that has not previously been payed for (before midnight tonight).

Feel free to harass me while I am at formula D over the phone, i might be on AIM mobile as well. Friday and Saturday night, there will be pictures from the event on the homepage of the site. (http://www.rpsport.net)

Yoshi, I am going to hook it up on your order with some good hardware, I picked up everything today and will assemble on sunday.

Have a great weekend everyone!

[Yoshi]

Yoshi, I am going to hook it up on your order with some good hardware, I picked up everything today and will assemble on sunday.


You da man, John.

[mashloh]

interested in the AC line. What year is it from? is shipping still gonna be 9 dollars or more cause of the long shape?
I'm at 78727. PM me. Thanks.

[taiyou]

I want to get the pair of strut mount.

[johngriff]

ok, if you are looking at the upper mounts, those would be the ones.

Paypal: [email protected]

John

[xvr420x]

you have lots of different prices on cams, i need an exhaust cam for an sr. im at 92345

x

[johngriff]

Ok, shoot me $10 for the cam and $9 for shipping.

John

[WAH_KA24DET]

I will take the driveshaft loop. Give me your paypal and the final price please. Thanks

[Galen]

this is an A+ seller!! i bought the coilpacks from him and they were here in 2-3 days. the price is right (like he said, "so low you dont even have to low ball!") and the service is great.

thanks a bounch,

Galen

[TipStylez]

you get my PM?

[Tyler_240]

this is an A+ seller!! i bought the coilpacks from him and they were here in 2-3 days. the price is right (like he said, "so low you dont even have to low ball!") and the service is great.

thanks a bounch,

Galen

+1. Good business

[fromxtor]

How much would to take if I got the remaining VCs off you shipped?

[sochinkyeyesshut]

payment sent for sr20det front timing cover... thanks... great price..:)

my email is [email protected] and [email protected] if you have any questions..again thanks

:)-Dara

[Blotter]

I want that S13 front 4 lug front.

[nathanzm32]

Ill take the coil pack cover thats left. Gimme a price shipped to 38843 and Ill hit you with the good paypal.

[johngriff]

10+9=19 shipped.

[johngriff]

This Thread has gotten TOO cluttered.

I want to confirm with everyone that you have recieved your order, or you have a tracking number, or, you have spoken with Nathan or Myself regarding your order status.

Get in touch if there are any issues. I think we did awesome in this first round, and everyone was accurately and QUICKLY shipped.

Otherwise... :lockd: and Zilvia is going to get some $$ for this garage sale, and I will Post a new one, to clear out everything else.

John

[silvia408]

you still have the intake manifolds? email me at [email protected]

[sad240]

is the used sr20 harness for $200
was it modified to fit an american chasse nad what kind of condishion is it in.
no cuts or missing parts???