PDA

View Full Version : Sr20det head on KA24E?

510skater
04-03-2007, 01:38 PM
delete thread please
GSXRJJordan
04-03-2007, 01:39 PM
nope. different bores, different cooling passages, the bolts wont even line up.
Kaotik25
04-03-2007, 01:44 PM
impossible, unless you can ...yeah just don't do it. If you want some power then turbo the SOHC.
pr0ject TRUENO
04-03-2007, 01:46 PM
It will not work without extensive machine work, and in the end, it's better to just turbo the SOHC or piece together an SR swap.
twofourzerosx
04-03-2007, 02:01 PM
tell your friend that its really not that expensive to rebuild a bottom end of the sr20... assuming there is no major damage
WISH ONE
04-03-2007, 02:35 PM
its about 1500 for a stock rebuild through any reputable shop
steve shadows
04-03-2007, 03:01 PM
just stroke and bore the sr, it will be cheaper in the long run..

anything is possible...

i mean you could breed a donkey with a dolphin too thanks to the magic of engineering (genetic)
sepulchral
04-03-2007, 03:14 PM
Yes is this possible? my friend just blew his sr20det but the head is still good. Going to let it go for a cheap price.. well since i have a SOHC i want to go dual for a cheap price. then go turbo and make like 400hp. i seen KA24DE make that kind of power so anything is possible. Has anyone done this before and if so what tools and hardware will i need to get the job done? :repost:


you can do it but you'll need a rubber hammer and one of these

http://www.sfgate.com/blogs/images/sfgate/techchron/2006/06/19/tool.jpg







...
just messing w/ u
.