best place for s14 sr20

[Jason240sx]

good customer support and reasonable prices. any suggestion guys?

[Bigballin]

http://www.zilvia.net/f/forumdisplay.php?f=53

???????

[DUBCITY]

RND Factory

I know there's some controversy surrounding them
but i picked my motor up relatively* hassel free

main reason, their prices are better that most everone elses

my s14 sr is still running strong after XX number of track days

[utahdrifter]

RND Factory

I know there's some controversy surrounding them
but i picked my motor up relatively* hassel free

main reason, their prices are better that most everone elses

my s14 sr is still running strong after XX number of track days

what kind of controversy? i was thinking of going though them.

[Jason240sx]

hmm nothing else on the list other than that?.....

how much is the usual labor cost charged at a shop to swap in a sr20det to an auto s14?

sucks to live in an apartment

[DUBCITY]

what kind of controversy? i was thinking of going though them.


search the review section

[Jason240sx]

ok thanks a lot

['90RPS13]

Jarco or Jhot. HeavyThrottle.com or RND like mentioned above.

[mmdb]

Try G-speed racing. They get a lot of clips, and also JPR motorsports.

[usdm180sx]

If you want the absolute best quality and don't mind paying a premium for the peace of mind to know that you will get what you pay for go to Marco at sr20store.com. If you want a good quality clip for a very reasonable price go to RnDFactory.com.

[qwikspool]

sr20store.com, rndfactory.com, jspec.com, shogunstyleperformance.com, heavythrottle.com, i know there's more. but the cheapest i seen and dealt with is rndfactory. but others are still good.

[utahdrifter]

i was also looking at Under Pressure Fabrication and Distribution in westminster a while ago, they have very good customer service and they quoted me a really cheap rate on a SR swap. but i dont know if anybody else can vouch for them, they arent very well known. (to my knowledge)
does anybody know any onfo on them?

[mmdb]

Why go to sr specific shop (rndfactory, jspec, etc)? Cut out the middle man and go directly to the source which I've mentioned. They can run a compression test and leak down right then and there. Downside is you won't get customer support such as installation issues and the like.

[usdm180sx]

Why go to sr specific shop (rndfactory, jspec, etc)? Cut out the middle man and go directly to the source which I've mentioned. They can run a compression test and leak down right then and there. Downside is you won't get customer support such as installation issues and the like.

IIRC Edward at RnDFactory is also an importer. That's why he gets clips for such a good price.

Good luck Agent Johnny Utah!

[qwikspool]

rndfactory have a good customer service. a couple of zilvians vouch for rndfactory.