Camber Kits

[boyou2]

hi evrybody :)

well i searched but i didn't find anything about it :)

i wanna know if the camber kits that fit s13/rs13 are the same with s14?????

thx for the answer ;)

[yokotas13]

no

and you call yourslef a premie

Neg rep for not searching....you welcome for the red

[CoasTek240]

im gonna have to say probably not. But i do know for a fact that you can find out in yakota;s signature.

www.zeroyon.com. i believe there is a downloadable FSM there. if not find one online. theyre cheap or even possibly free.

[yokotas13]

you cant be serious?
They wont work damnit lol

Ive tried

but an s14 will work on a WGNC34

[The Chad]

The rear camber arm on a S14 and S13 are completely different in design. My S14 requires an arm that is a half-moon that wraps around the strut, whereas the S13 is a complete circle that wraps the strut. As fas as the the front end camber kits...some longer threaded eccentric bolts will work and should be the same for all 240's/300's.

[yokotas13]

or notch your coilover lower bracket, or buy coilovers with camber plates and notch the lower bracket like most people do

[ManoNegra]

I had S14 RUCAs briefly on my S13. One side adjusted fine but had issues with the other - passanger side I believe. They were Powertrix RUCAs but found a set of used S13 ones so I swapped...

[boyou2]

no

and you call yourslef a premie

Neg rep for not searching....you welcome for the red


keep cool man,it was just a question,stay calm,thx

thx for answers guys.

i wasn't sure that's why i asked,nothing more nothing less,nobody says he's better or not from another.....

[yokotas13]

if you dont know search

[boyou2]

and how did YOU learn??

BY searching of course,AND by asking question,why would you let people search as a stupid,if some good people will help you with a smile??

it's the same situation for me at my job,if i can help someone not to search and spend he's time by this way,i'll help him.

i think i was here to have and give some infos,to help people not to make errors,not to put them down.i think we got a different point of vue about the word "help" Oo

and i'm sorry if i'm not 'omnipotent'

BTW

thx again for your help.

[!Zar!]

Ugh. Lots of blabber, no solid info.

Answer I believe boyou2 needs to know.

s13 rucas on a s14 will only work if you have coilovers.

s14 rucas will work on a s13.

s13 eccentric bolts will work on a s14 spindle, but you will need a sleeve to fit in the spindle. Being as how the aperture on s14 spindles are larger.

s14 eccentric bolts on a s13 will not work unless you drill out your shock and spindle.

[projectRDM]

^ What he said. Less crying, more reading please.