PDA

View Full Version : hks pro boost controller (may be too much for you people)


fridaytech
03-26-2007, 11:14 PM
I bought this controller thinking i would go all the way with my sr...but money is tight so i am selling off some stuff...

Part #4503-RA007 note to find this product on hks website you have to search part number. unit is new and in box. $650 take away.. for pics or info email me [email protected]

EVC PRO

The EVC PRO is for professional use and installation only. Designed for highly tuned vehicles and race applications, the EVC PRO is adjustable up to 3.0Kpa (43.51psi) and incorporates all the functions of the EVC IV along with additional race inspired features. The EVC PRO takes input from the vehicles ECU and sensors to allow for adjustments to boost levels and characteristics to enhance performance. Boost curves can be programmed to variables such as, engine rpm and throttle position or vehicle speed. For example, when the vehicle begins to accelerate, boost levels will be at a preset level. As the vehicle gets into higher rpm range, the EVC Pro can be programmed to raise the boost level as the vehicle’s speed increases. This would limit lower rpm wheel spin while maintain full power potential at the higher RPMs. A built-in atmospheric pressure sensor (ATM) provides enhanced consistency in boost pressure regardless of various atmospheric conditions.

EVC Pro features

1.
Adjustable up to 3.0bar (43.50psi)
2.
Throttle position, engine rpm, vehicle speed inputs
3.
5 RPM settings from 500-12,000 RPM in 100 RPM increments
4.
5 Throttle position settings between 0-100% in 1% increments
5.
5 Speed settings from 1-300 KPH in 1% increments
6.
Atmospheric Pressure Sensor function (ATM)
7.
Digital throttle position percentage and RPM/Speed display
8.
Real time Digital Boost and Vacuum display
9.
Liquid Crystal Display Screen
10.
High and Low Boost Preset Levels
11.
Scramble Boost feature
12.
External Scramble Boost Trigger available
13.
Visual and Audible overboost warning feature
14.
Internal and External wastegate applicable
15.
Precision “closed-loop” boost regulating stepping motor
16.
Fuzzy Logic Programming will learn natural boost curve and optimize it.
17.
Flash Memory

Dimensions:

EVC Headunit- 112mm (W) X 25mm (H) x 84mm (D)

EVC Stepping Motor- 58mm (W) X 50mm (H) X 48mm (D)

LowNismo17
03-27-2007, 12:21 PM
what do you mean "you people" lol j/k.. i would try the supraforums, that's where all the big ballers are

fridaytech
03-27-2007, 02:04 PM
true true but nissan people are my kind of people.....someone has to be pushin some mad boost

fwuffy squirrel
03-27-2007, 04:14 PM
43 is mad f#cken $hit dude 43 lbs is like driving a jet. I could just see some idiot with money running 43lbs of boost on a stock SR with like 185's on the back. boots hits and your tires will never grab the floor again untill you hear a pop then you get to do some fun motor swapping games

Mathetai
03-27-2007, 05:37 PM
I ran 45 lbs on my diesel powered sand rail. Thats like 7 lbs on a SR. Not that anyone really cares... GL dude :)

SNC240SX
03-27-2007, 06:18 PM
I would love to run that much boost. Super fast till everything explodes! Good luck with the sale.

fridaytech
03-27-2007, 10:49 PM
awesome controller seeing as you can add boost at rpm ranges or speed ranges. to help with holding traction. note i do have a set of sleeves and metal head gasket to hold higher boost levels

240silvia
03-27-2007, 11:32 PM
i just want to verify that you ment to type $650 for this controller. If that's the case, what the fuck do you need that for????? lol. I bought a whole 240, and lowered it for less that that, lol. Good luck with the sale, but the Supra boys would prolly jump on that faster than us Nissan guys would. Not for money issues, just for the fact that most of us don't really have any use for it.

kleenS14
03-27-2007, 11:35 PM
shameless plug ^ haha. at least ya didnt bold it though lol.