Would vertex kit and type x wing look weird on a FB?

[Grey Ghost]

I know I might get bashed for this, but I haven't seen any vertex (or knock offs) with type x wing. Anyone seen it or have a picture?

[A Spec Products]

It should look fine.

Just look at a pic of a 240sx with "Vertex" kit (either hatch or coupe).

Then look at a pic of a 240sx with Type X Wing.

Then visualize both together.

[mr_240sx]

well thats what im planning on running on my track car..... should be fine imho

[kensreliableb18b]

yea it'll look fine. go for it.

[mr_240sx]

come to think aobut it.....it should fit nicer with the vertex kit then with a hb with no kit.

[azndoc]

Photoshop it if you must, or just don't run a wing on your hatch. Wingless is where it's at. Either way good luck.

[azndoc]

It should look fine.

Just look at a pic of a 240sx with "Vertex" kit (either hatch or coupe).

Then look at a pic of a 240sx with Type X Wing.

Then visualize both together.


Come to think of it. Logan has photoshop imbedded into his brain. I think the medical procedure was actually not that expensive. You should look into that. I know I will.

[A Spec Products]

Come to think of it. Logan has photoshop imbedded into his brain. I think the medical procedure was actually not that expensive. You should look into that. I know I will.

It came included in the "Dope As Hell" Genome Project

[Brian]

It could look good depending on your own imput.
you have to do good paint, wheels, height, etc...

[sideview_180sx]

unless you have access to mags like the ones BH has. it will turn out like junk......

[blackflag_Rms13]

http://img412.imageshack.us/img412/8863/2064uh0.jpg

Looks hot. But like Brian said, it's about execution.

[smelly240]

i need overs - and mo bigger wheels in back... 9 is so not baller.

[Taniguchi_Is_#1]

i need overs - and mo bigger wheels in back... 9 is so not baller.


yeah you do smelly. :duh: haha. ;)



your my boy smelly.

['90RPS13]

Go with Kouki OEM Kit.

[Brian]

i need overs - and mo bigger wheels in back... 9 is so not baller.


ugh... I'm ALMOST tempted to post some of my scans of cool cars...

EDIT - and now it is gone.
I SAID GOOD DAY SIR!!!

[Flybert]

i need overs - and mo bigger wheels in back... 9 is so not baller.

It's not the width that makes a wheel baller.

[Brian]

Look, if somebody wants to build a cool fastback, can you PLEASE just put me in charge of it.
I PROMISE it will look awesome.

[azndoc]

Look, if somebody wants to build a cool fastback, can you PLEASE just put me in charge of it.
I PROMISE it will look awesome.

Yeah he'll put a awesome digital climate control system all up in it fo sho.

[smelly240]

Look, if somebody wants to build a cool fastback, can you PLEASE just put me in charge of it.
I PROMISE it will look awesome.

ive already got uras(no not real) aero and its pretty slammed - i do need something more than the FNs tho. so if u wanna sell me a set of grenades - ill love you forever.




<3 phila people

[Brian]

yeah.... it's probably not gonna look very good just by the sound of this post.

I DO have a pair of grenades I don't need, but I think they are sold already...

[McRussellPants]

yeah.... it's probably not gonna look very good just by the sound of this post.


Yeah, there and abouts.



I'd probably throw all that junk he listed and give the keys to brian for 6 months.

[Grey Ghost]

http://i23.photobucket.com/albums/b377/mikeroscopic/29-01.jpg

Can someone tell what bumper this is? It's tough to tell. The sideskirt looks like GP sports G Sonic type II and type x rear valance and wing, but the bumper I can't tell. I know this should go under identify thread, but that might take a little long. It might be vertex, but not sure.

[waynehead05]

^ Hotness!!!

[sideview_180sx]

how the hell can people tell what front bumper it is if they dont have a clear shot. BH these people do not deserve such cool scans of what you have. think of it, noobs trying to have real 180sx style and so forth, nothing but knockoffs and sportmax wheels. ugh!!!!!!!!!! the horror

[Brian]

I know.

Thats why I only posted one page of that. lol

[OptionZero]

http://i23.photobucket.com/albums/b377/mikeroscopic/29-01.jpg

Can someone tell what bumper this is? It's tough to tell. The sideskirt looks like GP sports G Sonic type II and type x rear valance and wing, but the bumper I can't tell. I know this should go under identify thread, but that might take a little long. It might be vertex, but not sure.


You know what thread it should go in and you still don't post there? -1 for you.

Pretty sure that's just 180sx kouki aero.

[A Spec Products]

Can someone tell what bumper this is? It's tough to tell. The sideskirt looks like GP sports G Sonic type II and type x rear valance and wing, but the bumper I can't tell. I know this should go under identify thread, but that might take a little long. It might be vertex, but not sure.

To me that doesn't look right.

In order to pull off the wing properly, I think you need rear aero, not just a valence.

It balances the wing that way.

[clutch kick drifter]

use your imagination and do what you want.

[chmercer]

I know.

Thats why I only posted one page of that. lol

probably should edit it out of the post. i think its been up long enough.

[Ricks15]

Personally aggressive aero would complement a 180 -X wing alot more better, But Ive seen a few nicely done hatch 240's with that jagged Bomex aero and it comes out pretty fucken awesome.

[Brian]

probably should edit it out of the post. i think its been up long enough.

Done and done.

P.s. I think in some older dori ten vide, Taniguchi would drive around this white 180 with (i think my memory is correct) vertex aero and kouki wing...blah blah
It was like a test car where they use different cams and bullshits.

Point being. It looked cool.

P.S. my second point.

USAs suck at making cool 180s for the majority. Maybe somebody will make a cool one someday.

maybe
maybe not
maybe fuck yourself.

[ThatGuy]

USAs suck at making cool 180s for the majority. Maybe somebody will make a cool one someday.
http://www.uras.co.jp/2006image/2006event/06event_tas1/P1010006.jpg
http://www.uras.co.jp/2006image/2006event/06event_tas1/P1010014.jpg

[Brian]

Thatguy - oh good lord believe me I know Jpn makes some SUPER shitty stuff too. lol. I mean I've seen some busted up 180s with C33 laurel faces. ugh. not cool

[ThatGuy]

Hahahaha, understood Brian. I was supporting your comment about Uras needing some help in the design department. At least I didn't post the new Type-GT kit. Jeeze. :duh: They have some decent elements in their kits, but just go too over the top with it personally. I guess that's what happens when you let a silly monkey start a copany. :keke:

I think the only kit I would consider buying from them for one of my vehicles, is the N+. That's just because it resembles Stock OEM Aero pieces. :rawk:

[Brian]

I'm in the mood to scan up something ridiculous...

[ThatGuy]

Hahahahaha, I just realized you said USAs not URAS. Oh my god I suck at reading! :rl:

I'm going to bed on that note. :rofl: :rofl: :rofl:
Scan away Brian. Blow people's minds. :D

[hella_flushed]

it'll def. look good. i'd personally rock jdm aero since i'm biased but @ the end of the day, its all about personal preference. either way, you can't go wrong with either kit...

[Brian]

Or if 2004 is your style, just do this.
Mitsuru style

http://media.ziptied.com/members/files/2/haraguchi%20180%2001.jpg
http://media.ziptied.com/members/files/2/Haraguchi%20180%2002.jpg

[blackflag_Rms13]

Haruguchi is god.

End.

[DLo Eric]

ehhh its full of fail when you have shit wheels.
http://members.cox.net/dloeric/Copy%20of%20sidegooodBLURsmall.jpg
http://members.cox.net/dloeric/0215072240.jpg

[drftwerks]

dude what fuicking wing is on his car????????? hahhahaha

oh BTW is haruguchi ,so fuck off

[blackflag_Rms13]

Looks to be G-Corp or an R32 GTR wing? Dunno...

326 doesn't make a wing like that as far as I know.

[DLo Eric]

dude what fuicking wing is on his car????????? hahhahaha

oh BTW is haruguchi ,so fuck off


mine is a kouki wing, just at an angle and dark. yes fail wheels again.

http://www.westcoastimports.net/Gallery/lakemead101.JPG