5zigen FN01rc silver 17x8+20 and 17x10+25, (5x114.3) interested?

[faded1004]

looking to see if i can get money to buy some enkies, here is my setup:

17x8j +25 with 225 45 17 azenis RT-615 (F)
17x10j +25 with 245 45 17 azenis ST-115 (R)

they are currently on my s13 coupe, and have no rubbing issues, i have shock and spring setup... have very mild pull with halfzies roll, was scared of chipping the fender paint. running -.25 degrees of camber in the front and -1.25 in the rear. no rubbing issues at all and clears my z32 brake setup. the condition is good, with plenty of life... front has no wear past the bars, and the rears were bought a month ago. i don't liek to drift (too scary), i am a grip guy... also the car is a convertible, so i can't really push it too hard... hahaha... so much flex! i just like to cruise... hahaha... with alittle mountain in my diet...

setup run down:

kyb agx with tein springs, z32 brakes all around, and stock fenderliners are still there...



anyways, the wheels are scuffed from daily use? the usual marks i guess, but in perfect workign condition. i dunno if you have seen my car a bit ago, i used to have 255 40 17 neovas in the rear, and my car is a black convertible nobody kit... the 255 tucks with alittle more camber... all in all, straight and stuff...

i am looking to find local buyer and sell for about 800? need to get close to that much so i can buy some enkies, hehehe... i have been dreaming about them so long... time to try to make it happen. so let me know if there is any interest?

i shoudl be able to deliver up to the bay area also... so i guess let me know if you are interested and live from sf to sd...

http://img403.imageshack.us/img403/5122/img9412or4.th.jpg (http://img403.imageshack.us/my.php?image=img9412or4.jpg) http://img132.imageshack.us/img132/4893/img9408kx0.th.jpg (http://img132.imageshack.us/my.php?image=img9408kx0.jpg) http://img182.imageshack.us/img182/8200/img9411xf1.th.jpg (http://img182.imageshack.us/my.php?image=img9411xf1.jpg) http://img172.imageshack.us/img172/4483/img9416bx4.th.jpg (http://img172.imageshack.us/my.php?image=img9416bx4.jpg) http://img248.imageshack.us/img248/5329/img9415dz2.th.jpg (http://img248.imageshack.us/my.php?image=img9415dz2.jpg)

wheel #1

http://img219.imageshack.us/img219/8687/img9417xe2.th.jpg (http://img219.imageshack.us/my.php?image=img9417xe2.jpg)

wheel #2

http://img219.imageshack.us/img219/3914/img9418nw5.th.jpg (http://img219.imageshack.us/my.php?image=img9418nw5.jpg)

wheel #3

http://img132.imageshack.us/img132/270/img9419ka0.th.jpg (http://img132.imageshack.us/my.php?image=img9419ka0.jpg)

wheel #4

http://img261.imageshack.us/img261/593/img9420uo8.th.jpg (http://img261.imageshack.us/my.php?image=img9420uo8.jpg)

i only put on the tire gloss on 2 wheels so that you can see the difference in the 2 sides... just so that you know that i am not just taking double pics of one side... as you can see from the pics... hehehe... super nice for the s13...

**** after a long thought on how to measure the face stick out length... hehehe, it occured to me to use some of my rulers, sorry it took so long, i got busy with school and work, and now that spring break came along... i got alittle more time...

so with out further ado.... the pics:

this is with my t ruler... and how i will use it... putting it on the face, you can see how much it sticks out...
http://img250.imageshack.us/img250/4613/img9498vm4.th.jpg (http://img250.imageshack.us/my.php?image=img9498vm4.jpg) http://img126.imageshack.us/img126/2186/img9499gi3.th.jpg (http://img126.imageshack.us/my.php?image=img9499gi3.jpg)

now, a closeup with a ruler on my rear... you can see it is about half an inch from the face... (used full resolution pics, wait for it)...
http://img126.imageshack.us/img126/9529/img9500kt2.th.jpg (http://img126.imageshack.us/my.php?image=img9500kt2.jpg) http://img126.imageshack.us/img126/4817/img9501er5.th.jpg (http://img126.imageshack.us/my.php?image=img9501er5.jpg)

here are is the ruler setup on my fronts, here make sure to keep in mind, that the ruler is slightly bent, and that i am not measureing the face, it is now on my azemis rim gaurd... the part that pops out of the rim... i am sure you guys know...

http://img250.imageshack.us/img250/7500/img9502rr4.th.jpg (http://img250.imageshack.us/my.php?image=img9502rr4.jpg) http://img104.imageshack.us/img104/8849/img9503ky8.th.jpg (http://img104.imageshack.us/my.php?image=img9503ky8.jpg)

so to recap, i have a .5" offset from the face to my slightly rolled rear fender, and about .15" from my non rolled front fender.

[A Spec Products]

I'm pretty certain these are 5x114.3 but might want to include that

Also, you sure its a 17x8+20?

I think they only made 17x8+25 in 5x114.3

[faded1004]

heheheh, i just noticed it when i posted it... hehehe... i already changed it... hehehee... thanks!!

wait... i changed it already, but i dont' see it on the main thread list... weird... may be it takes a while?

[faded1004]

okay, pics are up... so let me know if you are serious about these... if i have a buyer, i need to buy my new wheels, right when i sell you these, i dont' have back up wheels at the moment... i sold them all inorder to come up with money for the new set... but i am kinda short... thus, the need to sell these off...

i did edit the size... mr aspec was correct... the fronts are a +25 offset... thanks for the check... i litterally had to take the wheel off to check... but forgot to take pics of the inside... i will try to get that done this weekend if needed...

[Monooxide]

What would be the 17x10 +25 extension? How far is the rim face past the rear fender? Better above pictures with a ruler maybe? If not just a straight overhead picture? Thanks.

[faded1004]

wow, complicated shot... hahaha... i will try tomorrow morning... need to find a good clear ruler, i think i got a drafting ruler i can use... let me see if i can get this, and show you...

[Monooxide]

:D Thank You. Because one picutre it looks like 1/2" ish and another it looks like 1 inch almost.

[Monooxide]

Nothing eh? Pics?

[Inlandsilvia]

will you sell the rear set only???

[faded1004]

no, i want to sell the set as a whole... i posted pics of the face offset...

[Galen]

hey, i have money in hand. i live ia the SF bay area. can we meet up?

pm sent, give me a call if there still for sale.