taking apart \blacking out s13 clear corners?

[amplifi3d]

hello,
i have these ebay s13 clear corners and i wanted to take them apart and spray them black inside. I heard you can usually open corner/head lights using a heat gun/oven but i am worried about the whole housing melting. anyone do this before? any alternatives?

[chmercer]

sounds gross

[ROTTEN EGG]

pre heat over to 200 F and pop them in for 10-15 min. They should be hot enough to pull the lense off the housing. This is the basics, do a search for 1 of hundreds of write ups on the net.

[amplifi3d]

sounds gross

http://www.motorsportscom.info/drift/2006/round-09/img/ph_rd09_no075b.jpg

No, i want it to look like this! ^^^^^^

[benefitx]

preheat oven to 245 , get a tray and put some aluminum foil on it...put them in and the glue should be warm enough to pull apart the lens...just like Rotten Egg said

[Ichi-Go]

Put them in the oven, turn the oven to automatic clean mode and buy oem ones.