FS: CA socal lots of 240sx parts for sale

[jdm_enthusiast]

i have a lot of spare parts for sale. i'll list what i can remember and will add more later on. if you don't see what you want, email or pm me because i probably have it. i almost forgot, i have some after market parts too, but they are brand, i never use it. feel free to pm or email me at [email protected]

price is OBO ane i will ship at buyer expense & pictures are available

Parting out sr20det click on the link http://www.zilvia.net/f/showthread.php?p=1609032#post1609032

S13:
1. hatch taillights $25 each
2. hatch center light $25
3. hatch wingless w/ glass in excellent condition $90
4. hatch Front windshield(you have to remove it) $50
5. hatch 1/4 glass (240SX) you have to remove it $20
6. JDM S13 complete front brake (bigger ex. rotors, caliper, and lines) $50
7. crack dash $10
8. Starter $40
9. S13 wiper motor $25
10. S13 carpet $80
11. Power steering reservoir DOHC $25
12. S13 back seat $30
13. S13 stock radiator $50
14. S13 gas door $15 15. S13 shocks/springs $75
16. power steering lines DOHC $25
17. Rear sub frame $50
18. Front cross member $50
19. Fuel pump assembly $20
20. S13 89-90 pig nose front bumper $30
21. Car jacks (i have 5) $5 each
22. Coil $40
23. door red in excellent condition complete (left or right) $100 each
24. SR oil pan $30
25. 91-94 bumper $50
26. S13 Radio trim $25
27. S13 center console crack a little bit $35
28. S13 seats (pair in good condition) $80
29. Lots of panel...lmk what you need
30. MAF sensor $50
31. S13 driver fender $45
32. S13 passenger fender $45
33. Stock air box $25
34. S13 stock steering wheel (2x) $25 35. pop up headlights one pair $50
36. Intake tube $25 37. S13 driver door panel good condition black $40
38. S13 driver door panel excellent condition black $50
39. S13 Front or Rear lower control arms or upper control arms $25 each.
40. mirror black (i have 2 sets) $25 each
41. Trunk coupe m3 blue (has holds for spoiler) $40
42. Front calipers $25
43. Flex plate $15 Flex
44. Auto ECU (2x) $25 each
45. A lot of solenoids, relays, and etc lmk $offer

S14:2. S14 (Zenki) bumper lights (pair) $40

KA24DE:
1. S13 ac compressor $50 each
2. S13 lower intake manifold $30
3. S13 upper intake manifold $30
4. KA crankshaft (excellent condition) $50
5. S13 Valve cover $30
6. Alternator $50
7. Water pump $25
8. KA engine front cover $30
9. Fuel injectors + rail $50
11. s13 Exhaust manifold stock $30
12. s14 Exhaust manifold stock $35
13. Flex plate $15

After market: (these are brand new unless stated used)
1. Defi control unit II $100
2. Defi-Link boost gauge (psi) white $200
3. Defi-Link oil pressure amber $235
4. Blitz turbo timer DTT Black DC IV $100
5. Used steering hub $35
6. MOMO 4 pts. seat belt harness black (i have one left) $150
7. Ebrake turn knob (white, blue, red) $12

****in process of parting out hb (whole car) lmk what you need ex. doors, lights, bumpers, fenders, and etc.
will trade for 5 lugs conversion and z32 tt calipers.
can't think of anything else right now... i will update it as much as possible.

[jimmytango00]

taking any trades? i have a 86 corolla coupe sr5 shell. If not let me know how much your looking to get for the intake manifold.

[jdm_enthusiast]

taking any trades? i have a 86 corolla coupe sr5 shell. If not let me know how much your looking to get for the intake manifold.
coupe or hatch

[jimmytango00]

its a coupe. I also have s14 front 5 lug set up spindels, rotors, and hubs.

car has a clean title no accidents and is up to date with registration..it expired jan 2007.

http://i8.photobucket.com/albums/a50/WOLF45SKYLINE/photobucket5.jpg

[jdm_s14_zenki]

what color is the silvia front end? tripple projectors included? dents?

[jimmytango00]

here is pic of the 5lug set up.

http://img.photobucket.com/albums/v218/sergis/5lugsetup.jpg

[jdm_s14_zenki]

color of the silvia front end....???

[jdm_enthusiast]

what color is the silvia front end? tripple projectors included? dents?
fenders, hood, white color. bumper is gray. clean condition. paint is still glossy. yes triple projectors.

[jdm_enthusiast]

silvia hood sold

[jimmytango00]

i tried calling you but no answer. Just wondering if your still interested in the corolla trade?

[jdm_enthusiast]

i tried calling you but no answer. Just wondering if your still interested in the corolla trade?
sorry not interested..... thanks

[jdm_enthusiast]

in process of parting out hatchback right now....pm if you need anything, i'll post some parts as soon as i can. thanks

[randomhero415]

100 bucks for the fenders?

[jdm_enthusiast]

100 bucks for the fenders?
sure come and pick it up

[jdm_enthusiast]

*****update*****

Silvia front..... sold

07/05/07***new.... i just pull out my sohc and dohc ka and im parting it out. lmk what you need. it's complete ex. compressor, p/steering pump, alternator, covers, cam, sensors, actuators, and etc.

****in process of parting out hb (whole car) lmk what you need ex. doors, lights, bumpers, fenders, and etc.

[jdm_enthusiast]

bump.................

[lil240sx95]

do you have the 96 ac compressor?

[sideview_180sx]

you happen to have the engine bay harness??? for a sohc chassis.

[rednissan180]

do you have pics of the turbo timer

[jdm_enthusiast]

do you have the 96 ac compressor? will the 91-94 fit? cuz i have those

[jdm_enthusiast]

do you have pics of the turbo timerhttp://img171.imageshack.us/img171/8370/dsc02266hf8.th.jpg (http://img171.imageshack.us/my.php?image=dsc02266hf8.jpg)
http://img181.imageshack.us/img181/8893/dsc02265hw0.th.jpg (http://img181.imageshack.us/my.php?image=dsc02265hw0.jpg)

[Itsuki]

Where exactly in socal you located? ill take the engine mounts..

[iROYAL]

how much for s13 stock exhaust? and fender side markers?

[jdm_enthusiast]

Where exactly in socal you located? ill take the engine mounts..in hacienda heights, ca 91745 lmk before you head down.
iROYAL (http://www.zilvia.net/f/member.php?u=54358): i have to double check on the fender side marker cuz i might have sold it.

**update: s14 rear bumper sold

[atoczek]

I need the trim that goes around the hatchback glass on an s13. Where in SoCal?

[jdm_enthusiast]

I need the trim that goes around the hatchback glass on an s13. Where in SoCal?yea i have it 91745

[Addicted2Kouki]

bump for andy.

dude is cool as fuck.

legitttttt.

buy from him. now.

[EchoOfSilence]

how much for SOHC injectors only (no rail)

[Dripht240]

how much for the power steering stuff?? HP line, i need the hardware from the pump itself (the valve plunger thing that connects to the HP line), and maybe the steering rack with hardlines i need this shipped to 06074 lmk asap

[jdm_enthusiast]

how much for SOHC injectors only (no rail)
$25..........all four

[jdm_enthusiast]

how much for the power steering stuff?? HP line, i need the hardware from the pump itself (the valve plunger thing that connects to the HP line), and maybe the steering rack with hardlines i need this shipped to 06074 lmk asap are you looking for the dohc or sohc? i have both pump for dohc and soch but the rack is only for sohc. i sold the HP line already.

update: camshafts (dohc) sold

[Dripht240]

are you looking for the dohc or sohc? i have both pump for dohc and soch but the rack is only for sohc. i sold the HP line already.

update: camshafts (dohc) sold


well i have the DE in the car... the things i need to get my PS back to operating is the High pressure plunger valve (i think thats what its called), new hardlines cause i had to cut mine, the HP line which you dont have, and a reservoir

as far as i know i think i can get the hardlines on my sohc rack but ill have to relocate things or something lmk what of that you have

[EchoOfSilence]

$25..........all four

I'm down. will you be available for pickup in the late afternoon someday this week?

[reckless]

bump for andy.

dude is cool as fuck.

legitttttt.

buy from him. now.

I second that i bought the rear S14 bumper from him, he's a real cool guy with a bad-ass 3rd gen RX7 TT

[jdm_enthusiast]

I'm down. will you be available for pickup in the late afternoon someday this week? yea... i am available in the after noon...check your pm

[Dripht240]

still waiting on that power steering ish... lmk soon!

[DRavenS13]

How much are you willing to sell the entire DOHC engine for??

[jdm_enthusiast]

How much are you willing to sell the entire DOHC engine for??
i replied back to everyone already. are you talking about the non running one (DOHC)?

[jdm_enthusiast]

willing to trade for z32 30mm front caliper and 5 lugs conversion.

[DoriftoSlut]

Need DOHC S13 exhaust manifold and DP and exhaust... everything. What parts do you still have?

[240sx_sr20det]

do you have the MAF from a s14 ka?

[mugendork]

interested in your Nismo Tranny mount, and the transmission from the single cam motorset. As well as other oddball parts when I go and pick them up from you. I have cash in hand, and can pick up today if you call me at
760 - 267-8441

-Jared

[PMSing Chicken]

Do you still have shifter/hvac/radio trim with the shift boot, hazard light button, rear window defroster button, popup headlight button? (for s13)

I'm about 2 hours away 92071. I might want to pick them up.

[veeates36]

hey still got those mirrors..? i need the pass. non power, please pm..i'd luv to pick this up...thanks

[jdm_enthusiast]

Need DOHC S13 exhaust manifold and DP and exhaust... everything. What parts do you still have?i have it DOHC S13 exhaust manifold $35

[jdm_enthusiast]

do you have the MAF from a s14 ka?i have for S13

[jdm_enthusiast]

hey still got those mirrors..? i need the pass. non power, please pm..i'd luv to pick this up...thanks pm back to you already

[xtrmnop]

Do you still have the tranny for the DOHC? If it's a 5spd - let me know. Thanks.

[jdm_enthusiast]

Do you still have the tranny for the DOHC? If it's a 5spd - let me know. Thanks.sorry sold...

update.. s13 right door panel sold...

[mugendork]

Just wanted to say it was a pleasure doing business with you. Buy his stuff guys!!!

[xtrmnop]

Do you still have driver side S13 fender? Any pics?

[jdm_enthusiast]

Do you still have driver side S13 fender? Any pics?
yes.... it's in excellent condition

http://img527.imageshack.us/img527/1549/dsc02167iv3.th.jpg (http://img527.imageshack.us/my.php?image=dsc02167iv3.jpg)

[jdm_enthusiast]

***update..

s13 right door panel sold...
ALL wiring harnesses sold.....

[s14zenki_zenki]

ill take the car jack. PM me.

[jdm_enthusiast]

check parts.... i just updated. will trade for SR parts

[xtrmnop]

Still got the fenders both sides? Where you located again?

[xtrmnop]

And those fenders are chucki ones right?

[jdm_enthusiast]

And those fenders are chucki ones right?

yes...check your pm

[driftage240]

how much for just the front 5 lug hubs....

[jdm_enthusiast]

how much for just the front 5 lug hubs....
don't have 5 lugs only 4 lugs

[xtrmnop]

Do you have rear bumper cover to? I might be around your area next weekend so I might be able to pick up the fenders and maybe rear bumper if you have it. Thanks.

[chriSRtians13]

have you sold your s13 bumper yet?
i have a friend willing to pick up tomorrow.

and if he's going, i might pick up the momo harness.
do you have one set as in BOTH DRIVER/PASSENGER,
or do you only have just one? i'm interested in both.

i'm trying to sell my 180sx front/rear seats.
so if those sell as soon as i'm hoping,
i'll definitely buy the harness from you,
cause i'm thinking about picking up a
bucket seat too really soon. just waiting for
my seats to be sold. just let me know what's up.
thanks man.

glws

[jdm_enthusiast]

Do you have rear bumper cover to? I might be around your area next weekend so I might be able to pick up the fenders and maybe rear bumper if you have it. Thanks.
yup i have all of them

[jdm_enthusiast]

have you sold your s13 bumper yet?
i have a friend willing to pick up tomorrow.

and if he's going, i might pick up the momo harness.
do you have one set as in BOTH DRIVER/PASSENGER,
or do you only have just one? i'm interested in both.

i'm trying to sell my 180sx front/rear seats.
so if those sell as soon as i'm hoping,
i'll definitely buy the harness from you,
cause i'm thinking about picking up a
bucket seat too really soon. just waiting for
my seats to be sold. just let me know what's up.
thanks man.

glwsmomo harness i onlly i have one. s13 usdm front i still have it.

[Flaco S14]

how much for the S13 doors? both of them. any pics?

[240look'n]

Bump for a good guy.

thanks for the Hood.


Cody

[jdm_enthusiast]

how much for the S13 doors? both of them. any pics? just door $75 each. or with glass and regulator $100

[jdm_enthusiast]

Bump for a good guy.

thanks for the Hood.


Codythanks....


10-18-07 **update...
1.hood sold
2. rear brakes sold
3. E-brake cable sold (i still have the cable that attach to the handle)

check out the list for parts, i just added some more parts

[jdm_enthusiast]

bump to the top

[shinda_shima]

Hey, I'll take a car jack off of you...where in SoCal are you located?

[jdm_enthusiast]

Hey, I'll take a car jack off of you...where in SoCal are you located?
check your pm

[jdm_enthusiast]

i have sr parts for sale. click on the link

http://www.zilvia.net/f/showthread.php?t=162190 (http://www.zilvia.net/f/showthread.php?p=1609032#post1609032)

[Addicted2Kouki]

andy you got a running KADE laying around?
or a KADE head?

[jdm_enthusiast]

andy you got a running KADE laying around?
or a KADE head? yes check your pm

[seraph]

just wondering what color is your S13...cause i might want your hatch

[wzntha]

..........

[jdm_enthusiast]

just wondering what color is your S13...cause i might want your hatch
primer (gray

do you have any pics of the s13 seats?
i'll post some tomorrow.

[jdm_enthusiast]

bumpe.........

[jdm_enthusiast]

bump....... any one have a HKS SSQV bov, i need it

[wanganwonder]

i need a stock hotpipe and upper IC pipe, as well as the weather stripping for the doors (s13) - got any of that?

[jdm_enthusiast]

i need a stock hotpipe and upper IC pipe, as well as the weather stripping for the doors (s13) - got any of that?i have the weather strip $10 but not the ic pipes it was sold

[steezy]

what kind of steering wheel hub is it?

[jdm_enthusiast]

what kind of steering wheel hub is it?honestly i don't know what kind it is it came with my 240sx when i bought it. here is a pic of it maybe you can tell.
http://img80.imageshack.us/img80/9706/dsc02444aq0.th.jpg (http://img80.imageshack.us/my.php?image=dsc02444aq0.jpg)

[sileightyfreak]

bump!!!!!!!!!!!! do u have a ash tray? $5

[MachZenki]

Looking for S13 cams....

[jdm_enthusiast]

Looking for S13 cams....i only have intake cam for DOHC. and SOHC.

bump!!!!!!!!!!!! do u have a ash tray? $5 i have it check your pm

[jdm_enthusiast]

1. ka24e pan sold...
2. chuki front lip sold...
3. ka24e distributor sold...
4. s14 auto drive shaft sold...
5. ka24e power steering sold...
6. Ka24de exhaust cam sold...
7. ka24de torque converter sold...
8. s13 auto speed sensor sold...
9. s13 auto tranny sold...
10. Manual boost control sold....

[jdm_enthusiast]

bump to the top

[handinpants]

31. S13 driver fender $45
32. S13 passenger fender $45

do you have pics? [email protected]

[MelloS13]

are u selling the upper timing chain cover if so how much ? for S13 Ka

[Oo_Skyline_oO]

hey, what part of socal are you located in?? and I need hatch lift supports. here's my link:http://www.zilvia.net/f/showthread.php?t=181112 if you're willing to trade for anything in there let me know, if not let me know how much you want for good condition lift supports if you have them

[Import_Prophetz]

you got PM'd about your Intake manifold.

[zilrb25]

do u have the down pipe for ka s14

[jdm_enthusiast]

are u selling the upper timing chain cover if so how much ? for S13 Kasold all...... close thread please