need a little sr20 coolant help (picture included)

[nis240sxsan]

ok so i connected my turbo lines, and chose the top of two holes on the block for the coolant feed. so i go to put in coolant, and it spills out the bottom one. so i disconnected the top one and plugged up the bottom hole, and coolant shot out of the top hole. so which one should i use? does it matter? and does the other one do something else i'm not aware of? heres a pic of the area i'm talking about:

http://img.photobucket.com/albums/v113/stealthstang6787/fuytfyu.jpg

[steve shadows]

well...you have to plug the one you don't use...:tweak:

[g6civcx]

Look at the pix below. The blue fitting is for the coolant from the block into the turbo. The bolt below that is for the drain plug I believe. You use it to drain the block. You need to plug it.

[nis240sxsan]

that works, thanks guys!

[g6civcx]

One more picture from phase2motortrend to confirm: http://us.st11.yimg.com/us.st.yimg.com/I/phase2motorsports_1941_78485329