S14 Air Conditioning swap

[jr_ss]

hey guys im in the middle of doing my Sr swap and am stuck with my airconditioning. I have a 95 se auto and hae swapped in a S14 SR20.I have the pump and bracket from the SR and my KA ,is there some combination of the pumps and brackets i have that i can make work with out cutting lines or buying extra parts?im stuck and all of the info i have found is for using S13 brackets. Thanks

[devonkyle77]

Remove the KA engine without discharging the air conditioning gas. Pull the compressor off to the side and tie it up. You have to use the KA compressor wire from over by the MAF NOT the SR harness one.

The SOHC KA compressor requires a simple custom bracket to mount to the SR engine. DOHC KA compressor usually bolts right on, using 2 of the 4 SR bracket bolts. Dealer installed AC may or may not line up correctly.


taken from http://srownersclub.com/faq/#aircond

[lumbo007]

use a redtop bracket and bend the line near the compressor. all 4 bolts bolt up if you use the redtop bracket (but you don't use the middle bolt when bolting the bracket to the block)