proxy231
03-05-2007, 09:40 PM
Hey,
Thanks to a bad turbo and the end of my budget, I'm selling off a bunch of parts that were installed on my S14 with a T25 turbo. All parts have less than 50 miles on them. Some scratches from minor scrapes on the ground, all parts sold as-is (but I'll describe them as much as possible).
Megan S14 Downpipe with flex section. Welded secondary 02 bung in correct location, upper half painted in high-temp black (some bubbles), extension welded to give correct fit. Some oil residue inside, shouldn't be a problem.
100 + shipping obo
SSAC S14 Tubular Exhaust Manifold w/ T25/T28 flange. Has some high temp black paint, mostly peeled off from the heat. I can also include some header wrap with the manifold if you want it.
90 + shipping obo
Deatschwerks 370cc injectors. Less than 50 miles, some slight damage to one or two spacers but these are practically brand new, I bought them only a couple months ago for $250 and hardly ran them. I will ship them with new o-rings.
180 + shipping obo
T25 turbo with both elbows (can part out the elbows). Seems like blown oil seals, needs a rebuild.
90 + shipping obo
X02 T25 dump pipe with divorced wastegate tube. Has a primary O2 bung. Some oil residue inside, otherwise in great shape.
60 + shipping obo
SMIC + all stock cold/hot pipes. I cut the plastic cold pipe and used silicone couplers to fit an S14. SMIC is all there including stock BOV.
100 + shipping
2 silicone coupler transitions 2.5" -> 2". From high-temp silicone.
10 each + shipping
JGS T25/T28 Oil Feed/Drain Kit. Complete with everything you need to feed and drain the oil.
70 + shipping obo
That's about it. Just pm me if you want anything or have any questions. Thanks.
Carl
Thanks to a bad turbo and the end of my budget, I'm selling off a bunch of parts that were installed on my S14 with a T25 turbo. All parts have less than 50 miles on them. Some scratches from minor scrapes on the ground, all parts sold as-is (but I'll describe them as much as possible).
Megan S14 Downpipe with flex section. Welded secondary 02 bung in correct location, upper half painted in high-temp black (some bubbles), extension welded to give correct fit. Some oil residue inside, shouldn't be a problem.
100 + shipping obo
SSAC S14 Tubular Exhaust Manifold w/ T25/T28 flange. Has some high temp black paint, mostly peeled off from the heat. I can also include some header wrap with the manifold if you want it.
90 + shipping obo
Deatschwerks 370cc injectors. Less than 50 miles, some slight damage to one or two spacers but these are practically brand new, I bought them only a couple months ago for $250 and hardly ran them. I will ship them with new o-rings.
180 + shipping obo
T25 turbo with both elbows (can part out the elbows). Seems like blown oil seals, needs a rebuild.
90 + shipping obo
X02 T25 dump pipe with divorced wastegate tube. Has a primary O2 bung. Some oil residue inside, otherwise in great shape.
60 + shipping obo
SMIC + all stock cold/hot pipes. I cut the plastic cold pipe and used silicone couplers to fit an S14. SMIC is all there including stock BOV.
100 + shipping
2 silicone coupler transitions 2.5" -> 2". From high-temp silicone.
10 each + shipping
JGS T25/T28 Oil Feed/Drain Kit. Complete with everything you need to feed and drain the oil.
70 + shipping obo
That's about it. Just pm me if you want anything or have any questions. Thanks.
Carl