PDA

View Full Version : 95 ka motor in 89 240sx wire help?


s13monkey
03-02-2007, 06:55 PM
okay i got a 95 ka and i have a 89 s13. motor came with a uncut wire harness and the ecu. when i look at the harness i see that there different but i already know that i have to do some wiring but i don't know what to splice into what. dose any know what wire color have to be spliced from the body harness to the main engine harness and any other wiring that has to be done or thise any one have with diagrams from a 89 s13 and a 95 s14 so that i can figure it out.

projectRDM
03-02-2007, 07:27 PM
Tons of info on this here and online elsewhere.

Search.

brewster240
03-02-2007, 09:13 PM
is your car originally sohc or dohc?

if its a 91+ use the s13 harness, with s13 coolant sensors, throttle body, distributor, and mafs.

s13monkey
03-03-2007, 12:24 AM
i have a 89 original sohc i have the harness for the dohc with the ecu but i know that i have to splice some wires so that the dohc harness can work with the sohc body harness. the sohc harness has a plug that come from the ecu connector that gose to the body harness. i need to find out what wires i have to splice into from the dohc harness so that is works with sohc body harness.

projectRDM
03-03-2007, 07:51 AM
i have a 89 original sohc i have the harness for the dohc with the ecu but i know that i have to splice some wires so that the dohc harness can work with the sohc body harness. the sohc harness has a plug that come from the ecu connector that gose to the body harness. i need to find out what wires i have to splice into from the dohc harness so that is works with sohc body harness.

Mother fucker, search.

And FYI, the S14 harness into a SOHC chassis is 10x more work than just using an S13 DOHC harness. Just by your shitty ass typing I can tell you're not even remotely capable of doing this correctly. Go buy a Schwinn.