HELP Please: sr20det vacumn lines and throttle body lines, intake

[grnappletree14]

i have a s13 redtop sr20det. i need help installing some lines. i dont know where the vacumn lines go. i know there like 3 that come out the tb but ii dont know where they go. if some1 can tell me that be great. also i dont know where the canster line goes theres one that goes to the fuel, 1 for the purge, and 1 for the dist vacumn i think. im not sure. also on the stock intake pipe there some kinda of line that needs to be connect there to. any1 have any ideas thanks

[JDMClifford]

top left to FPR
top right to BOV and boost gauge
bottop is pluged on mine with a cap.
and theres a cacumm port on the stock cold pipe you can hook up a manual boost controler to
and i dont ahve anything connected to the one on my intake its also caped.

[g6civcx]

Top skinny left goes to FPR. The fat one goes to the CBV/BOV. The bottom one gets plugged if you don't have an EVAP canister.

[grnappletree14]

thanks for the info. i dunno if i have a canister where is it located in the engine bay, also any pics of it. where can i buy the cap to block it off, also what size is the cap thanks

[g6civcx]

thanks for the info. i dunno if i have a canister where is it located in the engine bay, also any pics of it. where can i buy the cap to block it off, also what size is the cap thanks

The canister is located next to the radiator and US-driver/left side headlamp. It's a black round box that's slightly bigger than a mayo jar.

You can get a vacuum plug from your local auto parts store. Just eyeball it and get several sizes. It's one of the smaller ones. The cap should have a slight stretch to fit, not loose and not too tight.

Throw a zip tie on top of that and you're good.