crashed my baby....full part out

[eastcoastS14]

email: [email protected]

NEW UPDATES POST #160

ok so basically i am a dumb fuck totaled my shit:bash: and now parting out everything im you are interested in any specific parts let me kno...still have to go inspect full damage but front areo intercooler radiator and all that shit is done for sure. so heres my set up let me kno if you see anything you like and when i find out the condition i will sell... pics to come soon

car is a 95 white zenki i will find out the condition of the motor and would really like to sell it all together...it is a super clean set up

let me know what you are interested in and when i get all the info i will give prices in the mean time feel free to make an offer and call me a retard etc

EVERYTHING IS OBO....read post # 48

engine: sr20det black top
-rebuild stock block,new rings,bearings ect..
-apexi head gasket
-mild port and polish head
-nismo plugs
exh/turbo:
-ss auto. 38mm wastegate
-custom made top mount manifold
-t3/t043 .63 ar 57 trim stage 3 wheel w. v-band exit
-hallman MBC
-v-band 3" down pipe
-3" exhuast n1 style
IC/Intake:
-300zx maf
-custom intake pipe
-HKS Filter
-HKS BOV
-samco hoses
drivetrain/suspension:
-nismo motor mounts
-phase2motortrend sub frame bushing
-clutch line
-s14 tranny
-ACT 6 puck sprung hub
-s14 viscous lsd
-5 lug
-300zx brake MC
-skyline R33 GTR 4 pistons calipers(front) stock calipers(rear) also stainless steal lines
-front also has cryo treat slotted rotors
-17x9 +15 5zigen fn01r-c w. falken 451 245/45/17(front)
-17x10 +12 5zigen fn01r-c w. falken 451 255/45/17(rear)
-D2 coilovers
cooling:
-samco hoses
-pivot rad. cap
-remote relocation oil filter
Interior:
-sparco fighter seat
-aem uego a/f meter
-hks egt
-hks water temp
-hks oil pressure
-mines LCD boost meter
-DSG delrin shift knob
-Tomei steering wheel
-RS Enthralpy ROM tune
Fuel:
-deathwerks 740cc inj.
-walbro 255lb pump
-sard regulator w. guage

also for sale

all stock interior
battery relocation box and wires
tanabe sustec pro seven coilovers with TEAS...still in box
300zx rear calipers
all body parts except front end
anything else you can think of

pics of when it was still alive below

http://i176.photobucket.com/albums/w166/maxlopes/IMG_0800.jpg

http://i176.photobucket.com/albums/w166/maxlopes/IMG_0799.jpg

http://i176.photobucket.com/albums/w166/maxlopes/IMG_0798.jpg

http://i176.photobucket.com/albums/w166/maxlopes/IMG_0797.jpg

http://i176.photobucket.com/albums/w166/maxlopes/IMG_0796.jpg

[corey240]

werent you at gt live with dsg?

[Wes_s13]

you have a PM. Thanks

sorry for the loss btw. How did you crash? if you dont mind me asking.

[SilviaVsSupra]

wow that was a super nice car too, i PMd u for some stuff.. gl

[ichi-bum]

Sorry to hear about your loss.

In regards to your FS thread, I'll wait till you post prices. Not sure if you wanna deal with shipping to Toronto, Canada at this time.

At any rate good luck with your sale.

['90RPS13]

Sent yoiu a PM about the 5 Lugs and Rims. *a

[eastcoastS14]

werent you at gt live with dsg?

^^ nah car was built buy DSG here in MA tho.. super clean job those guys are great and prob wont be to happy about this

[eastcoastS14]

you have a PM. Thanks

sorry for the loss btw. How did you crash? if you dont mind me asking.

hey thanks man yeah it really sux...the car was pretty fast and it was actually the first day i took it out for the spring since it was kinda nice here yesterday...took my girl for a ride dropped second just fuckin around cold tires slipped out on some sand and the rear slipped out i tried to catch the slide but couldnt end ended up hitting a telephone pole i only brokey my nose and my girl broke a vertebrae in her back....its my second car crash...1st i wasnt driving so i think im really done with this shit for a while to much of a close call i really think i could have died

[eastcoastS14]

^^ if anyone is interested the car is putting down about 350whp w/o cams so if anyone is interested in the entire engine let me know... i have a lot of PMs on this stuff...thanks for everyones interest i will try and get back to everyone ASAP still a lil :zzz: from my pain killers lol i will be answering ur PMs on what i can other stuff i will be able to better answer when i get to take a better look at the car thanks for ur patience but feel free to keep PMing me with what ur interested in ....and yeah really not interested in any trades at the moment unless u want everything for a car and not a 240 lol pretty shook up about them at the moment


MORE PICS...car being built http://www.dentsport.com/gallery/v/dsg/projects/QQQ/

[dopeyx27]

how much for the walbro 255 pump shipped to 91755?

[dopeyx27]

and all three of your hks meters shipped to 91755? Thanks lol

[s13gold]

pix of battery relocation stuff.
is that a sard fpr? w/ gauage?

[eastcoastS14]

all pics to come sorry im at home on oxicodine right now lol and its snowing here...and yes it is a sard w/gauge and oh yeah box is a sealed summit racing box and moroso wire set and a 60amp inline fuse

[LookOut Nick]

pm me price
just for the 17x10 5zigen's shipped to virginia?

[Mdl_Pin0y]

I'm very interested in your turbo kit. please let me know if its still for sale. Thanks.

[pbcstylez]

Please PM me for the front rims, z32 MAF, z32 BMC thanks

[Wes_s13]

ill take the chassis when your done parting it out lol. How much?

[Slidin240Wayz]

Sorry for your loss.

Coolant breather and oil catch can with lines and intake pipe.

Carlos

[eastcoastS14]

thanks man ill see if the oil catch can survived coolant breather didnt tho

Sorry for your loss.

Coolant breather and oil catch can with lines and intake pipe.

Carlos

[slideways14]

how much do you want for the coilovers and the wheels?

[98koukile]

What are you looking to get for the sr? Hard to find people with stuff for sale in this area...

[moonshinekouki]

how much for the wideband shipped to toronto?

[DoriftoPnoy]

injectors, fpr w/ gauge, and z32 maf shipped to 91304 please

[JDMwannaBE]

hey, super interested in the entire motor! How much are you looking to get?

[tiresmokes13]

Damm setup looks nice!!! bump for you. Sorry about the crash too.

[grnappletree14]

i pm'd u. how much for the 3" exhuast n1 style, deathwerks 740cc inj, battery relocation box and wires, and the radio bezel trim.

[Zilvia4eva]

How much for the D2 coilovers?....Hope they ain't damaged:x:

pm me if you like

[max2damax]

Sorry man, how much for your radio trim?

[s14_rob]

-hks egt
-hks water temp
-hks oil pressure

how much shipped to 60451

[UsJdmTUner]

first off. i hope your are ok..feel better man..im interested on alot of parts.. i need ..Email me [email protected] or call me ASAP 212-464-7027... Im serious buyer.. thanks
-door panels..
-clutch pedal assembly, brackets etc for my auto to manual conversion
-shifter boot with center trim panel for manual
-slave cylinder
-5 lug
-300zx brake MC
-skyline R33 GTR 4 pistons calipers(front) stock calipers(rear) also stainless steal lines
-tanabe sustec pro seven coilovers with TEAS...still in box
-300zx rear calipers

[GSTracer05]

Very interested in the suspension.
Please provide shipped price to 91326.

1) Tanabe Coilovers
2) D2 Coilovers

If the price is good, I'll jump on one of the sets asap. PM me.

[creAtive]

gauge cluster shipped to socal 91732.

sorry about your lost.

[longdy]

ummm... i dont see any pics ????.. it could help alot lol:cool:

[sk8elenex92]

How much for wastegate?????

[irritatedmax]

how much for the turbo shipped to 68510? how many miles on it?

[staygold24]

I need door panel, passenger side locking mechanism and windshield squirters if they're black. What kind of battery is that?

[sTalnOut]

waiting for your reply on the PM , feel betta man

[S14GE]

sorry to hear the bad news man, but how much for each of these shipped to 90039?
-300zx maf
-custom intake pipe
-aem uego a/f meter
-hks egt
-hks water temp
-hks oil pressure
-battery relocation box and wires
-thermostat
-lightweight pullys?
-what kind of intake manifold?

[Wes_s13]

ummm... i dont see any pics ????.. it could help alot lol:cool:


there is plenty of pics and he provided a link halfway through the first page that has tons of pics throughout the build.

[mizizax]

i need the plastic thing that goes between the front windshield, and the hood/enginebay. i know it is long and awkward, but i need one.

[email protected]

or aim immaxanduloveme

[jimmytango00]

HKS BOV shipped to 90018

[Skinner]

water pump shipped to 75068?

[j20accord00]

guys i talked to him today and he sounded like shit lol..hes prolly gonna be around soon just give him some time...

-Evan

[srs14]

Are you located in IL? If so let me know what you have left.

[srs14]

Are you located in IL? If so pm me what you have left.

[eastcoastS14]

Are you located in IL? If so let me know what you have left.

Nope im in MA

[Chez]

wow those pics really make me think twice about cutting my bumper support for better intercooler flow...

[eastcoastS14]

guys i talked to him today and he sounded like shit lol..hes prolly gonna be around soon just give him some time...

-Evan

^^ yeah guys heres the deal this whole thing happened yesterday im in the process of getting the car to my house and stripping it...im still fucked up tho, on pain killers and getting surgery this thurs so this is what im gonna do...as of right now everything is OBO that means make me a reasonable offer on anything you are interested in and we will go from there.. i have way too many PMs on everything and its hard to give out individual prices on every single part of the car so if you already PMd me about something just send me one with an offer on whatever you want.. if my PM box is full my email is [email protected] sorry for the wait guys but evan is right im hurtin pretty bad so please be patient

['90RPS13]

PM'ed ya and email'ed ya. *a

[downshift_sideways]

You have Mail!

[speedboy109]

pic makes me cringe dang im sorry to see that bro

[chitown240SX]

how much for clutch pedal and shifter trim shipped to 60804?

[LB.Motoring]

LMK when you get time, on that hub

[ronmcdon]

pls let me know how much you'd like shipped to CA 90013
-tanabe teas controller
-740cc injectors

thanks!

[sunnys14]

fuel pump relay shipped to 95660

['90RPS13]

Hit me with a phone call or PM today so I can ship you that cash out. Thanks. *a

[TiNMAN]

i need some stock interior parts. PM sent.

[contranication]

Sent PM and email

[cisco240]

PM box full, e-mail sent.

[heyitzalan]

how much is the entire motor? pm me

[eastcoastS14]

hey everyone thanks for ur patience i am in the process of getting back to all PMs and emails its just taking some time... im looking at some of these offers and i realize my car was in an accident but please shoot me some decent offers and dont lowball me on stuff ive got some good ones and some that are waaaay too low so seriously we all know what these parts cost decent offers guys.....thanks to all again for their patience

[staygold24]

shoot me a pm for the stuff I listed in this thread and how much your looking to get

[DJ_Sunrise]

hey man.. sorry to hear about what happened.. but im glad you were not hurt worse. is the rear end fine? im interested in the rear subframe.. I live in NJ, i should be able to pick it up if you would be willing to sell it. take your time replying back, im in no rush.


-Bart

[sbanzer123]

how much for the vlsd and the hoses? i could probally pick them up if you dont want to ship and the price is right. ill come this weekend. pm me if you want.

[CRZY_AZN]

do u still have the bov?

['90RPS13]

Anybody heard from romeo? I wanted the wheels.

[eastcoastS14]

sorry everyone... still around i know you guys are waitin on me just had my nose surgery yesterday couple of my buddies will be helpin me do everythin so im just waitin on them....i cant lift shit either dr said i could really damage my eye itll take time but itll get done....i prob should have waited until after the car was strippedto do the initial post :ugh:

['90RPS13]

haha, its all good, i just wanted to make sure you were still alive. glad your surgery went ok man. i was just checking to make sure they were still mine. thats all. I just PM'ed you my PM's.

[DriftinAndy]

What The Fuck You Hit?..damn!!
Im Interested In The Z Brakes, Steering Wheel And Hub, Coilovers And Tranny...send Me A Email @ [email protected] Thanks

[bstonedrift]

E-mailed you about the Nismo Motor Mounts.

[switchflip]

man thats crazy. sucks but if you love driving dont let that hold you back from getting into it put 1g get yourself a stock s13 and drive again gl with sale (im to broke to buy anything)

p.s it was that dam honda filter that made you crash not you driving rofl

[eastcoastS14]

What The Fuck You Hit?..damn!!


lol telephone pole....those things really dont move for anything... and my girl was sittin in the passanger seat shes a tough one tho

[anhion]

did the passanger side corner light survive that?

[walkerkd]

oil pressure guage shipped to 76033

[gnuproject]

uego shipped price to 94301

[sTalnOut]

well sounds liek ur definitly doin good , well im still waitin on if you still have the battery relocation kit

[GoodOl'S13]

hate to see this happen. Hope you feel better.

[The Chad]

PMed you abt the interior climate bezel. let me know how much you want and to ship to 23235. thanks and again..sorry abt the car.

[MudRacer]

sent you a pm bout the window motor and regulator. Sorry bout your loss man.

['90RPS13]

Any word on the FN's yet?

[bstonedrift]

Have not heard back from you on the Nismo Motor Mounts. Are they still for sale?

[heyitzalan]

is clutch assembly still for sale?

[DUBCITY]

pm box full

havent heard back from you.
anyways, im very serious about the following parts

-full turbo kit, mani, dp, ic hot pipe, intake, etc
-ecu/harness
-aem uego
-black door panels
-black center consol
-rad hoses
-oil relocation
-injectors and regulator

let me know how much u want, either each part or for everything. im in ca 90292

thanks

[Sil-Abc]

still have the clutch pedal?

[Ryan666]

300zx brakes to 12538???

[altalti]

if you still have the steering wheel and any hub i may need for it to go on and the battery relocation kit let me know and sorry for your loss i had a friend total my last car real shitty feeling. send me a pm when u get a chance.

[eastcoastS14]

^^ ok so i have a lot of pms and emails on all of the parts and i will be getting back to people as i pull the parts it has taken me a while because i had to recover from surgery and its been cold and snowing and i have no garage...i will be replying to PMs as i pull the parts and try and get back to people in the order they emailed or PMd me.... im sorry for all this i really think i should have waited until the car was completely parted out before posting this thread to begin with...just to let you all know things like the fpr,bov,samco hoses and some other small parts didnt survive the accident. i plan to go through all my emails and PMs as i pull the parts and see if the senders all still interested in them once again im sorry for the wait...Im doing the best i can right now

[eastcoastS14]

^^ also i just pulled my wheels i would like to try and sell them locally and or have them picked up i would like to get $450 for the rear wheels and tires or $550 for the three surviving wheels you can also have the tire of the torn rim if youd like....if your interested shoot me an email because i think my pm box is full...ill also post this in the wheels for sale thread

[foolishdrift]

Your PM box is full so I sent you an email.

[delphis]

how much for oil filter relocation and oil pressure gauge shipped to 94509

[91240sxgtr]

aem-
hks gauges-
shift knob
steering wheel - hub -
fpr_gauge

[djp]

Hey man I'd love it if you could give me a call at 251-923-8222 asap.

[uwntsum]

wow. that really does suck. least you and your g/f are ok. that is more important than the car.

[fcken_engus]

Still have the injectors? interested. PM me asap

[RYAN_S-14]

I sent an email about the harness

[viscid240]

price on dash and a-pillars shipped to 85023............

[unwed_transient]

rear 5 lug sold yet?

[joyeiko]

sorry about the crash. do you still have the injectors and r33 calipers? shipped to 08046

[Driftmunkey]

Sent you an e-mail. Really interested in intake & exhaust manifold.

Thanks

[duckeee322]

hey im not sure if you sold these parts yet, but do you still have the 5 lug available? i was also interested in the shift knob and the steering wheel..

let me know.

[BoostinGST]

i need the body harness from behind the dash, with all the relays and stuff... and i also need a cluster

[napoleon]

-remote relocation oil filter

and if you have 5 bolt axles, i want them.

Give you 125 shipped right now for it all. LMK

glad to see your ok.PM box is full, BTW

[sneakerjunkie]

aye do u have s14 front passenger side lower control arm and tension rod please email me at: [email protected] or call me 916-479-0370 my names justin im located in sac

[willlangford]

if you still have the wideband how much to 98532 thx!!

[CoasTek240]

thats sucks man.. i hope you recoupe some of the $ you put into her.
i sent you a pm about your interior.

[Tenchuu]

I PMed you, need to buy S14 clutch pedal and MC ASAP

[smelly240]

pm box full... manifold sold yet?

['90RPS13]

Dude, this is like a month old. I havent seen any response from him. If you are still selling the hubs, brakes and rear FN's, money is waiting.

[eastcoastS14]

^^ hey pmd you about the wheels a while ago...also answered a lot of emails...for everyone who is asking about the motor...i started ripping the car apart and the motor appears to be in better shape than i thought so if i can salvage it i will not be parting it out... at this point i have to pull the motor to see if it is still useable....i honestly would not feel right about parting out a perfectly good SR so once i find out the condition i will notify everyone who has been asking about it whether or not it will be parted out

[djp]

East, my # is up. Gimme a call. :)

['90RPS13]

Toss me a copy of the PM, I didnt get it I dont believe. I have cash waiting and need brakes, hubs and rims! Thanks!

[Steveohoes]

do you still have the bezel that goes around the A/C controller that has the 2 vents?

[Wes_s13]

email me at [email protected] , Im interested in a couple things and want to come pick up. Im in boston, let me know when is a good time for you. Thanks

[mmmsilvia]

ill grab the Engine, Pm me :OD

[slammedS14]

love to have the vlsd if u still have it. tried to PM you but ur box is full. live on east coast. PM me. or call me up. 7033140901. [email protected]

[SimpleSexy180]

i have cash ready for the 5 lug rear. let me know.

[staygold24]

are the tires ok?

[forum04pl]

sent you two emails, the first one wasnt complete haha. let me know asap about stopping by.

[Jesse]

Are wheels still for sale?

[eastcoastS14]

djp: i will give you a call soon,
'90RPS13: ill see if i can dig up that PM and send you a copy,
steveohoes: the trim is still available shoot me an offer
wes_13: ill hit you up to see what u need that i have,
mmmsilvia: at this point i found out that the oil pan and block are both cracked so idk if you would be interested....i may try and source another block so i can rebuild rather than part it out for cheap,
slammeds14: i have yet to pull the vlsd shoot me an offer and ill let you know when its out,
downshift180: i will be pulling the 5lugs soon, im trying to find a new s14 so i wanna make sure its 5 lug before i sell these,
staygold24:the tires are fine
forum4pl:got your email ill try and get back to you about coming by when im sure ill be home since im in school right now and not always home on weekends
jesse: wheels are still for sale, $500picked up for all 3 and ill throw in the 4th destroyed one with a tire with a chunk missin from the sidewall..or $450 for just the rears

i also pulled the D2 coilovers all good condition $750 OBO,skyline front brakes that i have to decide if i will still be selling but feel free to make an offer, intake mani, 740cc injectors with fuel rail, turbo top mount and wastgate should be off next weekend...considering trading for a 2871r and mani but not sure if you got one let me know, seat and bride rail are still available oil catch can is also off as well as intake MAF, rear brakes will be off next week, 300zx calipers are off too....at this point it really depends if i can find another s14 and if the engine is repairable for a reasonable price if i cant get a new block for a decent price i will definitely be parting out the entire engine and im trying to find another 240...even if i do there is still a ton of stuff that will be sold and even if i find another 240 i may be going KA-T or maybe 1jz i am willing to trade for parts for a 1jz swap etc so i will definitely keep everyone posted as best i can...everything is really up in the air right now but my email is [email protected] feel free to contact me

['90RPS13]

Cool deal. I am still interested in them.

[Rockogtr]

u still got the wideband ? pm me if u do

[staygold24]

pm's are full

Hey Im interested in your tires, the locking mechanism on the passenger side and the door handle on the outside of the car. Im also interested in the trunk carpet and the board that supports stuff cant remember what its called.

Thanks,
Will

[eastcoastS14]

^^ hey im selling the wheels and tires together..ill see if i can get the door apart next time im home...and the trunk had no carpet or board

[viscid240]

never got back with the dash???

[cjturbos14]

still got the coilovers? very interested how much shipped to 32822

[viperbite]

hey do you have the drivers door switch assembly
i need that *email sent*

[eastcoastS14]

yeah D2's are still for sale $750 shipped

sorry didnt get back to you about the dash...pretty large though,where you located? you would have to cover shipping on that one since the box would be massive

ill try and get the doors off and apart asap

^^looks like i may be going to cape cod this weekend but its not certain yet so idk if ill be around to pull more parts

[Steveohoes]

how about $20 for the a/c bezel?

thanks
steve-o

[gnuproject]

still got the gauges and aem uego? if so, how much?

[gnuproject]

btw, pls PM me, thanks

[Wes_s13]

Interested in the following items. Prices Please. Thanks man.

deathwerks 740cc inj.
walbro 255lb pump
samco hoses
Enthalphy Rom tune

[apexhumper]

You have an email about your driverside door, hope all is well with you, sorry for the loss

[dreaMervaj]

-s14 viscous lsd

Let me know how much shipped to 29323. THANKS!

[noob240805]

DIBS ON SEAT give ya 300 for seat and slider

[beefers200607]

howmuch for injectors and topmount

[ho1ywars]

im interested in the vlsd, if the previous person falls though let me know how much it is shipped to 08628

[Dominic Axelson]

hi, i need a cheap but clean 240 that runs, no rust or very very little, hach or coupe, pm me, or email me my email is [email protected], im in IL thanks

[cherevolution2007]

i'm really interested in the transmission, steerin wheel, tachs, lsd, 300zx brakes, and wiring harness how much will it to shipped to 79924

[eastcoastS14]

hi, i need a cheap but clean 240 that runs, no rust or very very little, hach or coupe, pm me, or email me my email is [email protected], im in IL thanks

^^ jesus what did you just post this in every single thread on zilvia....pretty annoying

[ooowowizstev]

damn that crash was pretty bad.

[attracted]

how much for the seat
shipping to montreal canada

[keioffice]

can i get the full shifter assembly and the clutch pedal assembly? shipped to minnesota 55427

[gnuproject]

any luck on the response

[eastcoastS14]

yeah the crash was really bad super sketchy situation.....

big items like the seat will be expensive to canada....the seat goes for about $550 so ill do $325+shipping without rails ill add the rail on for more but this is a brand new bride bottom mount rail that installed the week before the crash let me know

ill check on the shifter but the pedals actually crossed from the impact

i think i may hold on the the uego but ill let the guages go for say $150 for the 3 ....i believe i have all the wires to connect them but 2 need new sensors

[apexhumper]

How much for the drivers side door, or just the shell and window?

[dropemlow]

aem uego a/f meter
do you still have it and if so how much? shipped to 35954.

[eastcoastS14]

srry double post

[eastcoastS14]

i think i may hold on the the uego but ill let the guages go for say $150 for the 3 ....i believe i have all the wires to connect them but 2 need new sensors
......msglth.....

[forum04pl]

yo send me an email back about getting that stuff. i need it for hin coming up

[gnuproject]

Could I get pics or description of the gauges. I'm interested, my email is [email protected] Thanks

[youngmanvr4]

Do you still have the rear brake calipers. If so then look at my WTB thread here (http://www.zilvia.net/f/showthread.php?t=141082)
I only need the passenger side really. But more importantly that piece the actual caliper/piston bolts onto.

Thanks, Nate

[FrankeBonez]

EXTREMELY interested in seat rail, pm box is full! im in ny can arrange a pick up or easy shipping, let me know!!!!!

[Wes_s13]

dude im still interested in the stuff i mentioned in my last post..i got cash in hand and ill go pick up..let me know. Thanks

[sa3reghatch]

clear your inbox!!! Interested in the z32 maf, injectors and intake manifold.

[leonb2004]

How much for the wastegate, manifold, and turbo shipped to 38843. thanks

[Edgar]

PM me if you still have that bucket. How much

[eastcoastS14]

a lot of ppl have been trying to send me PMs....send me an email instead forum04pl and '90rps13 i sent you guys emails last weekend...didnt know if you got those, wes_13 send me an email with your phone #

[eastcoastS14]

should br nice out tomorrow so ill see how many more parts i can pull

[eastcoastS14]

ok did a lot of work today and got many parts off ill keep putting up pics as i take them so this is what i got:
turbo-$500 shipped
hallman MBC-$75 shipped
front skyline brakes- $350 shipped
D2 coilovers-750 shipped
FN's 2 17x10's 1 17x9- 500+ shipping or $450+shipping for the rears
sparco fighter seat- $350 plus shipping
Bride MO seating rail $150 shipped
OEM passanger seat and rails make an offer
Oil catch can $75 shipped
Oil relocation kit (debating selling so make an offer)
300zx calipers- $150 shipped
HKS gauges- $60 each or $150 for all 3
AC trim no cracks - $20
glove box door - $15
door panels - make an offer buyer will pay shipping tho
z32 MAf plastic is chipped but still good - $125 shipped
center console - make an offer
shift knob- $35
HKS filter- $50
Mines LCD boost meter (out of production) $200
FET turbo timer - $40 email me for more info
bent tomei steering wheel- $10
AC unit missing screw holes on the right side- $15
red anodized steering wheel hub (not detachable) $50
pioneer ts-g1641r speakers $30 (not sure if Im selling tho)
CAS- $150

If i forgot anything you see in the pics email me about it for a price

I will also sell my entire turbo setup for $2700 which includes
turbo
Manifold
downpipe
38mm wastegate
ROM tuneECU
deatsch works 740injectors
MAF
Fuel pump
boost controller

Every thing that i have listed is for sale but I may decide against selling certain parts if i pick up another 240

-max-

[eastcoastS14]

pics:
http://i176.photobucket.com/albums/w166/maxlopes/IMG_0802.jpg
http://i176.photobucket.com/albums/w166/maxlopes/IMG_0803.jpg
http://i176.photobucket.com/albums/w166/maxlopes/IMG_0804.jpg
http://i176.photobucket.com/albums/w166/maxlopes/IMG_0805.jpg
http://i176.photobucket.com/albums/w166/maxlopes/IMG_0806.jpg
http://i176.photobucket.com/albums/w166/maxlopes/IMG_0808.jpg
http://i176.photobucket.com/albums/w166/maxlopes/IMG_0809.jpg
http://i176.photobucket.com/albums/w166/maxlopes/IMG_0812.jpg
http://i176.photobucket.com/albums/w166/maxlopes/IMG_0813.jpg
http://i176.photobucket.com/albums/w166/maxlopes/IMG_0816.jpg
http://i176.photobucket.com/albums/w166/maxlopes/IMG_0815.jpg
http://i176.photobucket.com/albums/w166/maxlopes/IMG_0822.jpg
http://i176.photobucket.com/albums/w166/maxlopes/IMG_0824.jpg
http://i176.photobucket.com/albums/w166/maxlopes/IMG_0831.jpg
http://i176.photobucket.com/albums/w166/maxlopes/IMG_0830.jpg
http://i176.photobucket.com/albums/w166/maxlopes/IMG_0828.jpg

more pics to come.....

[forum04pl]

what gauges are included in the package of 3? and if they have sensors are they included with all wiring?

what are you looking to get to pursuade you to sell the relocation?

[eastcoastS14]

oil water and egt are included in the 3 they oil and water need new sensors and i believe i have all the wiring for them....the oil and water came with the car but were never installed, egt comes with everything and ill throw in the mounting hardware and apexi gauge holder....as for the oil relocation make what you think is a good offer

[forum04pl]

you still have the aem wideband?

i could offer you $75 for the oil relocation

[wantboost]

still have the manifold and downpipe? also do you still have the relocation kit..

[eastcoastS14]

yeah i still have all 3 of those parts

[Steveohoes]

you never got back to me about the a/c bezel. I want to get it this week.
where do you live in MA?

[forum04pl]

aem wideband and offer on the relocation? i can pick it up this week

[eastcoastS14]

i dont kno if i am selling the wideband yet $75 for the oil relocation picked up is fine or i could bring it to HIN unless you need it before then

and yeah steveohoes come get that this week im located in medford

[forum04pl]

sounds good ill take the oil relocation, ill shoot you a pm so we can work out the pickup.

[forum04pl]

nevermind, your pm box is full. i can come pick it up wednesday afternoon/night or possibly thursday at night. shoot me a pm with what is good for you and your info so i can get there. i want to check out some of the other stuff so i might bring some extra cash :)

[eastcoastS14]

pmd ya......

[Not_Nissan]

Just read the first and last page....but noticed that the coilovers are in the recent pics...They already sold or what? Try to give me a pm, ill recieve that faster...thx

[forum04pl]

sent you an email, see you tomorrow

[forum04pl]

is the driveshaft still good? if so i might need to pick that up as well, driveshaft shopt is taking forever on my replacement

[KAredkouki]

how much for the hks ssq?

[Wes_s13]

i emailed you my number, never got a response. Let me know dude, i got cash. I need alot of things, give me a good price on everything i need and ill come pick up asap.

[eastcoastS14]

hey man i emailed you but ill give you a call today

[ntraserz]

will you ship the center console? and gimme a price shipping included to 85029 need asap

[eastcoastS14]

yeah ill ship it just shoot me an offer on it

[CalPolyKing]

wow that sucks about your car dude.. Good luck with your sell though, U have some nice stuff there.

[Wes_s13]

email me your number and the prices for the stuff and ill give you a call on what i want and maybe we can set up a time to pick up. Thanks

[nissan240syan]

I need the plastic part behind the door handle and lock (INSIDE THE CAR) on the door I GOT A PIC

[nissan240syan]

I need the plastic part behind the door handle and lock (INSIDE THE CAR) on the door I GOT A PIC <a href="<A href="http://imageshack.us"><img">http://imageshack.us"><img src="http://img96.imageshack.us/img96/87/dscn1042fd0.jpg" border="0" alt="Image Hosted by ImageShack.us" /></a>

[nissan240syan]

The Part Thats Missung In The Picture

[khmerguy618]

Sorry about your car man. Glad you and the OL are ok and in good shape though.

How much for the rear seat panels, the truck interior pieces/lining, radio surround, driverside door vent, door handle moldings on both sides, and the left hvac button, shipped to san jose ca 95132.

[email protected]

[abeTheDrifter]

Hey dude u still got the s14 viscous lsd and the seat. If so what condition is the lsd in(how many miles on it). and does the seat have any rips
Abe

[staygold24]

hey do you still have your tanabe coils for sale with teas? If so how much do you want shipped for them?

Thanks

[eastcoastS14]

Ok heres the deal i just picked up another 240 for a really good price that i couldnt pass up...I will be have to see exactly what i need so i probably will be keeping some stuff

[forum04pl]

glad you picked something else up, hopefully you can get all those parts into it now :)

[staygold24]

.... just not the coils.

Are you keeping them? Also your pm box is full, glad to hear your projects back up and running. Do you mind pming me if your gonna sell them or not and a picture of the front end of your car when it was in tact with that lip? Id like to hear the specs so I can put it on my car.

Thanks,
Will

[RedBastard]

holy shit isnt that Q's old car? im glad your ok. can you pm me a price on both rear seat cushions. i can pickup. im local.

[eastcoastS14]

yeah russ picked up another 95 240 local for $2500 so gonna start puttin swappin parts over pretty soon
staygold...im selling my D2s if youre interested but im keeping the tanabes
red bastard..yeah its Q's old ride..super shitty situation just make an offer on the rear cusions tho idk what to charge for them

Parts that are still definitely for sale are the D2's, sparco fighter, full turbo set up, bride MO rail, HKS gauges, Mines boost meter,the entire interior etc including wheel hub shift knob etc

[cutter]

how much for the coils harness shipped to 75703

[forum04pl]

give q a call at dentsport, i think he wants to buy that shiftknob back. they stopped making them in white and he wanted to know if you were selling it

[eastcoastS14]

ha jesus thats gonna be an awkward phone call but he can definitely have it

[khmerguy618]

How much for the rear seat panels, the truck interior pieces/lining, radio surround, driverside door vent, door handle moldings on both sides, and the left hvac button, shipped to san jose ca 95132.

[email protected]
__________________

[eastcoastS14]

hmm id have to figure out the weight and prices of all that stuff but ill see if i can get a shipping quote soon

[01SaturnL200]

price shipped for the front calipers and rotors if not sold to 39466 also need a price on the a/c bezel and radio surround also

[Wes_s13]

i see that your in need of a blacktop block...i have an extra redtop complete longblock if your interested

[eastcoastS14]

how much are you asking?

[staygold24]

Well Im still interested in
tires
door panels
oil catch can
breather tank
turbo setup
brake setup

let me know how much you want shipped for all that through pm. Also what ecu is used on turbo setup

[Wes_s13]

asking 550, got it from an importer as a spare , never used it because i decided to rebuild the other one i had that blew.

[abeTheDrifter]

hey how much for the seat and are u going to sell the lsd still
thanks
Abe

[TougeLabs]

i need all the window gaskets all the rubber and trim all around the two doors let me know i lost all of mine goin from the body shop to my house lol and nissan is no help...call me when you can 845-264-7653
joe

[91240sxgtr]

email sent
- paypal ready for the
_HKS EGT
_ Water Temp
_ OiL pre

[jononioo]

ill give you 60 shipped for the wastegate and all the 2.5in clamps

sorry about your loss:-/

[91240sxgtr]

paypal sent for the HKS gauges-
thanks again-

[driftertim]

Can you make a list of whats sold and Whats left so I can make you a list :-) Many Thanx, and Very sorry for your loss.

-Tim

[benefitx]

is the SR block sold?

[240love]

stuff still for sale??? how much for everything needed for a 5 lug swap on an s13 shipped to 93030 CA

[drifterx]

what do you still have on sale?
is there a fresh list?

[Wes_s13]

Are you interested in the block? If so maybe we can work something out. Throw me some cash and some parts you have for sale, or something. PM me if your interested.

[cxlo8331]

you got pm

clear your mailbox.

interested in the brakes if still available.

[eastcoastS14]

:lockd: :lockd: :lockd: :lockd: ^^ can a mod please lock this....i am really busy and I just picked up a new 240 so im not sure what ill be selling and what ill be keeping....when i decide ill post new threads...wes_13 ill give you a call

[undrconstruction]

dibs on driver sidewindow motor assembly, driver side mirror, & removable steering wheel!

[kendan]

if you decide to part out the exterior stuff how much for the drivers rear quarter shipped to 77340?

[Master240sx]

thats called a cowl
i need the plastic thing that goes between the front windshield, and the hood/enginebay. i know it is long and awkward, but i need one.

[email protected]

or aim immaxanduloveme

[ooowowizjonn]

you sellin dashboard?

[viperbite]

:lockd: :lockd: :lockd: :lockd: ^^ can a mod please lock this....i am really busy and I just picked up a new 240 so im not sure what ill be selling and what ill be keeping....when i decide ill post new threads...wes_13 ill give you a call


dude everyone take a look
morons