Foglight housings for the S13 in the vent slots?

[mbmbmb23]

I know the Canadian Spec S13's have the daytime running lights, but I have a US spec 93SX I have some nasty fake vent lookin' things.  I want to replace these with something like the late 90's Eclipses have....a plastic long oval housing that has a round fog light in the center (think of the CBS logo).  Does anyone make this conversion part?  If so...where?

Thanks,

M

[240meowth]

im making my own =)

i bought a circular fog light, and cut the plastic vents a bit, just enough to show the lens, so the fogs are hidden behind the vents...

i just started on it today, and it was dark after i fabricated the vents, i tried to install it, instead i screwed up my wiring on the head unit since i was trying to draw power source from there... what a pain...

[misnomer]

hehe, I pulled my power for my fogs from the fusebox, there's a slot there for daytime running lights (conveniently empty), which does the trick. Mine are some hooge rectangular ones I mounted behind those grills. Once I reaim them a tad bit higher, they'll be pretty effective.

[transient]

It's going to be a pain to mount my fogs. The 89-90 front end didn't really leave any opennings.

[240 2NR]

If I mount any fogs in my 93 I want to get a hole saw and cut a nice round hole on one side of each grill.  Then mount a round fog light in that space.  I think it would be best to then mount the foglight to the grill so I don't have to drill into the fender.

I don't like the idea of filling the vent, cause behind there is where my CAI will draw from eventually.  Or maybe an intercooler (big maybe).