Clutch line question

[Landers]

Quick question guys....i pulled my motor (sr20det in an s13 coupe) today and come to find out that my hydralic clutch line is all torn up :-/ . Now my question is can i replace it with a stock KA one or am i going to have to locate an SR line? I did not do the swap so i dont know if you keep the slave cylinder between the two motors and just hook it into the SR tranny. Thanks for the help guys you are the best!

[S14DB]

They are the same.

[S13 Charlie]

Are you talking about the rubber line going from the hard clutch line to the slave cylinder? If so, you should ditch that anyway for a braided stainless line from SPL-Parts, or similar. They're only about 20 bucks, completely interchangeable and pretty easy to install. Also, the slave cylinders are interchangeable between KA and SR, if you want to go that route.

hope that helps,

Charlie

[Landers]

Thanks for the help guys im gonna go with the steel braided...i appreciate the help and the quick responses!