PDA

View Full Version : well now this can't be safe...

loveless
02-13-2007, 04:50 PM
look at the distribution block... and that 2ga positive wire passing through next to the fuel line... any suggestion on how I can/should mount this?

http://fenvy.com/allen/safe1.jpg
http://fenvy.com/allen/safe2.jpg
http://fenvy.com/allen/safe3.jpg
http://fenvy.com/allen/safe4.jpg

or it is fine and I am worrying too much?
s13gold
02-13-2007, 04:51 PM
as long as it stays sealed....
projectRDM
02-13-2007, 04:53 PM
That's a 4ga wire.

But you're right, it needs to go through the grommet, running it outside will allow it to rub on the firewall and eventually ground out. Personally I'd chuck the block altogether and bolt it all through with a ring inside the fusebox, out of sight.
FRpilot
02-13-2007, 05:03 PM
i was planning on using the distribution box to do mine also.

you can always relocated the fuse boxes but thats a major pita. looks cleaner though..


r240god, what do you mean with a ring? i was asking my friend on opinions on battery relocation and he said he would connect the stock positive wire/starter/alternator with a fuse link case. i questioned him how since there are 3 wires? Please dont flame me! haha
s13gold
02-13-2007, 05:04 PM
might be off topic a little bit...but...what kind of sounds are you running.
loveless
02-13-2007, 05:06 PM
I have no sound, someone jack my head unit
s13gold
02-13-2007, 05:13 PM
damn...sux...subs..amps..tweets..speakers..or any components...im just wondering...bored on zilvia..
loveless
02-13-2007, 05:23 PM
nothing, apline 4x6 pussy speakers and head unit, that's all I had, har har

but they did jack my defi din gauges and left me with only the sensors
LA_phantom_240
02-13-2007, 07:29 PM
Kenwood 6.5 components in the doors (made MDF adapter mount), no rear fill at the moment, and 2 memphis 12s in the hatch. All powered with an alpine MRV-1507 and an MRV-F400. Beast ass amps.
projectRDM
02-13-2007, 08:49 PM
i was planning on using the distribution box to do mine also.

you can always relocated the fuse boxes but thats a major pita. looks cleaner though..


r240god, what do you mean with a ring? i was asking my friend on opinions on battery relocation and he said he would connect the stock positive wire/starter/alternator with a fuse link case. i questioned him how since there are 3 wires? Please dont flame me! haha

Crimp a ring terminal on the three wires originating from the battery terminal. Crimp one on the 4ga wire you have coming off the battery. Bolt it all together and tuck it inside the fusebox.