PDA

View Full Version : Mooneyes/Grant steering wheel-to-MOMO hub adapters


TruckFortySX
02-09-2007, 07:36 PM
I am going to be doing a small run of Mooneyes/Grant steering wheel to MOMO hub adapters. I would like to get a few interested people together prior to make it worth setting up tools, etc.

They will be a 3" OD (minimize extension beyond the base of the wheel) and .500" thickness. Polished 6061 aluminum. Nothing fancy. Adapter-to-hub hardware will be supplied.

Price is $30 per, shipped to lower 48. Priority extra.

I am going to do these late next week so jump on this!



Hottness:


http://i20.photobucket.com/albums/b244/dinodizzlerx7/IMG_1387.jpg




You know you want one.



To those interested:


-Polished or not?

-Holes in the middle for horn BS or not? As you can see in the pic, I did not drill them as he did not have the horn stuffz anyways.

-Paypal is [email protected], I would like up-front as I don't have the extra time to make these only to have everyone flake on me.

You can also see in that pic that I coutersunk his wheel for flathead allens, which I obviously cannot do to yours. This is the best option as the flatheads will pull the wheel to center, but it is up to you. I am going to tap the 3 holes 1/4"-20 (I think this is what I chose) as the bolts fit snugly in the holes and should keep any chance of shit working loose to a minimum. If you choose to C' sink your wheel, there will be no issue.



Thanks guys.

_Late_

byhi
02-09-2007, 09:54 PM
so this would be a half to inch thick in-between hub with 6 countersunk holes to bolt your product to the hub, and then i can bolt a mooeyes to your product?

with this fit hkb hubs as well, i have an hkb..

TruckFortySX
02-10-2007, 10:21 AM
You are correct on the description and as far as the HKB, this will fit ANY hub that has the 6X2.750" bolt circle that is commonly referred to as a MOMO pattern. If your hub is dual pattern (MOMO AND Nardi) then it willl work for sure.

Thanks for the interest.

240trainee
02-10-2007, 10:41 AM
I will so be down for one of these, I would prefer the adapter to be as thin as possible, but yea, here's what I would say

-What thickness would you like? (Let's keep it to .500" or 1")

.500"

-Polished or not?

doesn't matter, I'll paint it black if it's not polished

-Holes in the middle for horn BS or not? As you can see in the pic, I did not drill them as he did not have the horn stuffz anyways.

Horn hole please, I have to run a horn button to pass VA safety inspection.


Paypal at will, or are we waiting for anything else?

byhi
02-10-2007, 02:37 PM
im ready t opaypal, but i deff want to know if it will also fit HKB hub...

well put it this way, im going to put the HKB hub on the column, and then i have an NRG quick release, so i guess my true question is if it will fit the NRG quick release!

if so, ill paypal you yesterday!!! lol

soreballz
02-10-2007, 03:15 PM
I'd like to see more pics... I have a Grant wheel, but its a 5 hole pattern with a 3 hole hub-to-column adapter.

Thickness? = half inch.
Polished? = whatever, I'll paint it black either way.
Horn? = Hell yes.

TruckFortySX
02-11-2007, 05:40 PM
I'll get some pics of the old proto I did for Earl ASAP....


As I said in the post, I would like payment up front. I really would not like to turn a bunch of these out only to have people flake..... I am selling these on ZT also so if you do send money, make sure to list your option choices in the details.

I started turning a few yesterday for those who have already paid on ZT, so get in on this right away so I'm not steps behind with yours....


"BYHI"--- Yes it will fit an NRG hub. I guarantee it.

"Soreballz"--- Grant has a few 3 bolt wheels, that is what this adapter is for. How come you would need one anyways if you already have a hub for your wheel? This is for people who have a MOMO hub and want a wheel that is a little "different".

Thanks for the interest guys, let me know if you send funds.

_Late_

S14DB
02-11-2007, 06:00 PM
Is this a Group Buy?

projectdrifter
02-11-2007, 06:13 PM
i am deffantly intrested in a wheel can u get them in the color of picture attachedhttp://www.munkywurks.com/DSC03713.JPG

projectdrifter
02-11-2007, 06:14 PM
i can have paypal out as soon as tommarow if it is possible pm sent.

drftwerks
02-11-2007, 06:21 PM
any list of colors??

TruckFortySX
02-11-2007, 06:57 PM
I am going to be doing a small run of Mooneyes/Grant steering wheel to MOMO hub ADAPTERS.

If you would like me to have them powdercoated i nthat color, then yes, you can have a green adapter.

As far as being a GB, I would say no. I don't need a certain amount of people to do them, it would just be better to make more at one time.

Check here for the wheels you can bolt on to your current MOMO hub with these adapters:

http://www.mooneyesusa.com/catalog/index.php?cPath=188_74&osCsid=1ecceac0f97f332bb2b3ba57d6d2585c

240trainee
02-11-2007, 07:01 PM
payment sent

drftwerks
02-11-2007, 08:20 PM
hahah sorry, i dont know how to read properly

drftwerks
02-11-2007, 08:35 PM
paypal sent


msg lenght

byhi
02-11-2007, 11:06 PM
i shall paypal you in the morning

soreballz
02-12-2007, 02:52 AM
"Soreballz"--- Grant has a few 3 bolt wheels, that is what this adapter is for. How come you would need one anyways if you already have a hub for your wheel? This is for people who have a MOMO hub and want a wheel that is a little "different".
Thanks for clearing that up. Reason I ask is that the Grant hub is a POS, and it won't bolt to a quick release. This is good though, I was planning on buying a Mooneyes wheel anyway. I should be sending funds soon (by the 21st).

TruckFortySX
02-13-2007, 09:18 PM
Alright guys, still on track. Should have them out on Sat, possibly Fri. if I can find the time. Any other questions?

_Late_

TruckFortySX
02-19-2007, 08:09 PM
Sexiness right hurrrrr.....

http://i129.photobucket.com/albums/p206/fourdoordrift/IMG_05321.jpg

Those of you that have ordered.....be waiting for duh FEDEX man.
I shipped them with stainless allens instead BTW.



For those of you that didn't......

You lose.



Or just kidding, I made a few extra, ready to ship out tomorrow.

Anyone else want in?


Also, lol, if you are satisfied with my service, please rep me.
Some boner disagreed with me on a wheel thread and decided to find every post of mine he could and negrep them. Booooo.

Thanks

-Dustin

S14DB
02-19-2007, 08:47 PM
Your thread was locked since you are selling a product and not personal new or used parts.

If you'd like to sell, you can sign-up and pay a small posting fee as a GroupBuy Member. Information can be found here at the bottom of the page.

http://www.zilvia.net/f/payments.php

We use the fees to help keep Zilvia running and cover our hosting and bandwidth costs.