Nissan 350z FACTORY SEAT FOR SALE!!!

[Chillaxed 240sx]

This is a driver's side seat. I wanted to put this into my 240sx, but I changed my mind and got some s14 seats instead.

Price is $200.

It is a manual seat from a 2003 Performance 350Z. Here are some photos, too.

http://img.photobucket.com/albums/v284/CapnNismo/IMG_3969.jpg

http://img.photobucket.com/albums/v284/CapnNismo/IMG_3970.jpg

http://img.photobucket.com/albums/v284/CapnNismo/IMG_3971.jpg

http://img.photobucket.com/albums/v284/CapnNismo/IMG_3972.jpg

http://img.photobucket.com/albums/v284/CapnNismo/IMG_3973.jpg

http://img.photobucket.com/albums/v284/CapnNismo/IMG_3974.jpg








There is a little bit of wear on the outer lumbar support because this seat came from a daily driven 350z. But it is still VERY supportive and the cushioning is all still there. There's a bit of dirt on the bottom of the seat that I need to clean off because it's just been sitting in my garage for two weeks now. It'll come off, though, so no worries there.

[ESone3]

if you were closer, i'd snag these. Time for some custom railage!

['90RPS13]

Any interest in meeting for it? I am located across the border of NC in Charlotte. Or I will be in Myrtle Beach, SC in 3-4 weeks if you want to meet then. Lemme know. Thanks. *a

[Chillaxed 240sx]

Probably not. I am trying to sell these so I can move to Austria, as well. So I can't really afford to meet anywhere outside of Georgia - gas prices own my ass.

But Myrtle Beach isn't far from me so you're welcome to come and pick them up. It's about a 3 (4 at the most) hour drive from where I live.

btw, if anyone wants me to ship them, I will. Buyer covers shipping costs, though.

[heyitzalan]

does 350z seat fit on a s14? direct bolt in?

[Chillaxed 240sx]

The brackets do need to be modded. All S-chassis seats bolt in the same - S13, S14, S15 - they're all direct bolt-ins from car to car.

The 350z requires a bit of modification. The two on the front of the seat have more of a straight angle whereas the S-chassis seats bend down a bit more. Simple modification.

Then the inside rear bolt that goes into the transmission/driveshaft tunnel is off to the side on the S, but the Z it's flat. Then the other rear bolt is the exact opposite of the front; it turns in more and the S needs it to be flat.

I'm told from a welder friend of mine that the modification will be simple (and it really does look simple), it's just a matter of finding someone that can weld or welding it yourself.

So it's really not a big deal at all in modifying it to fit. The dimensions of the seats are also almost exactly the same (I swear the difference is only in milimeters). I did a test fit this morning in my car to see what the differences would be so I could tell someone from my personal experience.

The seat is still up for sale!!!

[burgy240]

If you had both I would pick these up.... good luck, Oh yeah, thee mods required can be found online to fit these into an S chassie, I think on NICO but I'm not sure.

[Chillaxed 240sx]

I've already searched online (and just searched NICO) and I was never able to find information on it already being done.

[s13gold]

got any pix of how it sits.

[Chillaxed 240sx]

If you want pictures of it inside the car, it sits just like an S14 or GT-R seat. The only real difference is the 350z has shoulder support where the S14 seat does not and the brackets are different. Beyond that, they're pretty much the same. Oh, and the 350z seat has that little divider in the middle of the seat to help grip your legs.

[SilviaVsSupra]

how much shipped to 33437? im ready for a new project! :D

[Chillaxed 240sx]

Check your PMs, SilviaVsSupra.

[burgy240]

If I get a chance I will search again , but I found it when I was looking into doing this upgrade on my s14 last year.....its definately out there, but where I don't know?

['90RPS13]

Hey man, I am sorry I didnt get back to you earlier. I am having problems with my sled. I am having to replace the whole fuel system due to the previous owner letting it sit so long. G'luck with the sale man. If you end up having it in a week or two I will pick it up. *a

[Chillaxed 240sx]

Sold!!!!!!!!!!!!!!!!!!!