Removing front bumper

[240Altima]

I am going to take my front bumper off to fix a small crack in it and I can't find any info on removing it. Can anyone help? This is for a '90 s13

[MyFirst240SX]

If you remove the head lights its makes it ezer to unbolt the front end

[ruf]

Just start unbolting stuff. The trickiest part is where it connects to the fenders. It's easiest to reach those thru the wheelwell with a long extension. Liners removed of course.

[diabolic hippo]

headlight removal would help out alot,
1) pop your hood, remove 3-4 bolts on the upper apron

2) jack your car up and start unbolting all those little bolts that outline your bumper, if it's a se you also have unbolt the chin seperatly.

3) cock wheel in one direction, unbolt splash guard, here's the tricky part, best to go with a gear wrench or a open end wrench to unbolt the fender from the bumper, if you don't remove the headlights, the last bolt on the top of the fender will look impossible, though i did mines with the headlight on.

4) almost forgot, in the mouth of the bumper there should be 6-8 clips which will pop out or you can unscrew them.