greddy spec M intercoolers?????

[vqboodah]

well i tried searching but it kept searching the other intercoolers greddy offers. im guessing not alot of people have used it yet. well im curious of how the quality and how the performance of these intercoolers are since they are much cheaper then the other intercoolers greddy has. if any one has it or heard about it, it'd be nice to get some feedback thanks!

[kassed33]

well its Greddy so its def good quality, its the smallest of the intercoolers they carry and has a 2 row core, should be good for mild horsepowers applications but hasnt been rated yet. But if your planning on going up over the 350ish range i would go with the Vspec, and if much higher than that the Rspec, but its gonna cost ya! But then again if you want HP you gotta pay for it

[Full-Lock]

the m-spec kit would be best for lower/mid power producing cars. it is not a tube type, but a laminated layer type inside the core. The CCP process has been removed to keep the cost down. Also, the end tanks and the pipings are buffed to give it that shiny fmic look that most high end intercoolers have. if you are shooting in the 350-400hp range, this is perfect.

[Flybert]

The mspec's look just like the chinese intercoolers. Greddy obviously outsourced them. I'm assuming that they are the 24x12x3 core. They are bar and plate and can handle way more horsepower than the VSPL. I would run 400+hp through one of these no problem and I'm sure it could handle more.

[allstar]

I run the m-spec on my ka-t and its perfect.. looks good and works great..

[vqboodah]

thanks for all the responses guys. keep it up!

[florante rea]

like flybert said the cores looks like chinese made. i bought hybrid intercooler and it looks the same as xs or ssautochrome. it will do the job just fine.
http://www.carparts.com.hk/

[florante rea]

i seen ppl uses this intercoolers and it looks fine to me. i was skeptical at first but as long as it does the job i'll be happy.

[koukikat180sx]

I have the m-spec kit. It looks good. I like it!

[KiDyNomiTe]

The main drawback is its heavy and not as pretty as the others, its probably from the same chinese factory or whatever that makes the rest of their intercoolers. They are cheap and good for the HP that most everyone on here will actually make and will probably over exceed what you make.

[A'PEXi]

they do the job fine for 300-400hp applications.

you can polish the piping up if you like, the piping is made in japan (similar to that of the v-spec) and the core i'm told is made in taiwan to greddy specifications.

[kawika219]

i got what looks to be a same quality one from ebay...it was only $300 and it works like a charm