PDA

View Full Version : Feeler fs 1990 240sx SE


jlkirakun
02-01-2007, 01:01 AM
Hi, I've been lurking on the forum and this is my first post. I've been deciding to sell my 5spd 1990 240sx hatchback so this is a feeler. I am the second owner and it is mostly stock with minimal body mods. It does have its pros and cons, and will be listed below. It has a clean title, straight frame, no accidents, and vin will be given on request. I am located in Southern California.

Exterior:
-The car has Silvia front conversion
-5 lug and brake conversion from a 96 s14
-the wheels are buddy club p1

Interior
-Some aftermarket seats, and the inside of the car is still clean

Engine
-All stock sohc ka24e, nothing done with it. 194,xxx some miles on it.
-The transmission does not grind; on cold start ups, it does chirp.

The bad:
-The right side of the bumper is dented due to some person hit and run when I was at the grocery store. When I came out, there was a dent there.
-The silvia front bumper has one side of the ventilation thing missing; the screws were not tight and fell out while I was driving.
-The exterior does have scuffs and scratches due to age

Other than these things, everything else with the car is fine. I'm going to college soon and don't really need a car. I do not realy know what i am looking for, so give me some offers.

Here is the photobucket link to a picture of the car:
http://s151.photobucket.com/albums/s145/jlkirakun/

I will post up more pictures when time permits. If you have questions, e-mail me at [email protected] Thank you for looking.

its errrrron
02-02-2007, 06:03 PM
check your pm

jlkirakun
02-03-2007, 03:12 PM
PMs replied.

More Pictures added, check the link again http://s151.photobucket.com/albums/s145/jlkirakun/

ImRickJamzBIttch
02-03-2007, 04:33 PM
how much are u looking to get for it

Brian
02-03-2007, 05:14 PM
How much for that thing?
$2400?

jlkirakun
02-04-2007, 11:08 AM
I am looking for a little bit higher than that.

Brian
02-04-2007, 11:38 AM
$2500 is a little hgher than that

jlkirakun
02-04-2007, 06:58 PM
I'll get back to you on that.