norrisdesigns-cool German CA18DET build.

[steve shadows]

http://norrisdesigns.com/demo-s13.asp

ps i know its ugly haha

Engine Mods:
CA18DET 1809cc Turbo
8800Rpm Rev Limit
511.5 Hp At The Hubs
613.8 Hp At The Flywheel
458.3 LbFt At The Hubs
Geared Top Speed 200Mph+
Best Top Speed So Far 186Mph
ND Forged Pistons
ND Chrome Piston Rings
Lightened & Balanced Bottom End
ND Twin Plate Clutch & Custom Flywheel
ND Steel Billet Crankshaft
Trust Steel Conrods
ND Lightweight Solid Lifters
HKS Camshafts
Tomei Wide Coil Valve Springs
Tomei Adjustable Cam Pulleys
ND Race Spec Cylinder Head (GT Combustion Chambers)
SARD 1000cc Fuel Injectors
Full Dash 8 Fuel Lines
ND Large Bore Alloy Fuel Rail
ND Prototype Large Throttle Inlet Manifold
SARD Adjustable Fuel Pressure Regulator
Bosch Motorsport Gp B Fuel Pump
ND Full Engine Management System
Full Greddy Turbine Kit TD06-25G
ND Prototype Front Mounted Intercooler
3" Intercooler Pipework
Samco Blue Hoses
ND Breather System
Undisclosed Compression Ratio
K&N Induction Kit
HKS Super Dragger Full Exhaust System
3 Bar Map Sensor
Motec M4 Pro Engine Management
ND Custom Full Engine Harness
Remote Mounted Battery With Alloy Cover

pretty cool I thouht this might be a good discussion over turbo upgrades for the CA18det and ca builds

Anyone use the TD06-25G personally?

[S13FREEAAK]

Norris Designs has been building some wicked cars for a while. Wouldn't expect less.

[wootwoot]

Looking at shit like that makes it hard to sell my fun car. I am gonna go look at some more motor needing rebuilding threads.....

[PoorMans180SX]

That is an OLD article. That CA has 650bhp now and it's owned by a different person. Japanese Performance (a UK magazine) had a feature article on it.

[Behind Horizon]

Just a hint, the norrisdesign company is from Great Britain. ;)

[NeedCAforS13]

I have a td06-20g on my ca18. not the same turbo, but similar set up. dyno numbers soon. shooting for (hopefully...) ~350whp on stock bottom end with a horsham developments rom tuned ecu (another uk company). I made 280whp on my s14 turbo afew months ago.

[rico05]

I REALLY want a HD chip. But I need to finish my suspension before I go for more power.

You should see a guy named "Big Tone"s CA. Before it burned down, he made what Sean..better than 600hp right?

[Disturbed]

I have a td06-20g on my ca18. not the same turbo, but similar set up. dyno numbers soon. shooting for (hopefully...) ~350whp on stock bottom end with a horsham developments rom tuned ecu (another uk company). I made 280whp on my s14 turbo afew months ago.

damn. stock bottom end? that makes me feel good about my CA. I need to get to modding.

[240trainee]

I have a td06-20g on my ca18. not the same turbo, but similar set up. dyno numbers soon. shooting for (hopefully...) ~350whp on stock bottom end with a horsham developments rom tuned ecu (another uk company). I made 280whp on my s14 turbo afew months ago.

Sounds badass, I'm going to see what I can get with a big 16g on a log manifold personally, can't wait to see what numbers you turn out.

[punxva]

just as i expected from norris designs, a very well built car

[NervGS]

18" X 7.5" Khan RSR's

http://home.comcast.net/~starfuryzeta/images/blog/kirk_scream.jpg

Sorry, I couldn't resist.

-glenn

[CKAMC]

18" X 7.5" Khan RSR's

http://home.comcast.net/~starfuryzeta/images/blog/kirk_scream.jpg

Sorry, I couldn't resist.

-glenn


its a grip car......

[boosteds13]

I have a td06-20g on my ca18. not the same turbo, but similar set up. dyno numbers soon. shooting for (hopefully...) ~350whp on stock bottom end with a horsham developments rom tuned ecu (another uk company). I made 280whp on my s14 turbo afew months ago.

Speaking of Horsham... I think I am just going to bite the bullet and order their Stg 2 eprom. I am sick of messing with Romeditor trying to get a decent tune out of this motor. Oh, and when the hell did you get a 20G?

[NervGS]

its a grip car......

What's your point....?

-glenn

[aa87]

Only tihng noris designs is remembered for is that 2 door evo, everything else looks just like anything else, including that 200sx.

[irax]

What's your point....?

-glenn
I don't think he gets the reference, not every one has seen The Wrath Of Khan.:nono:
BTW grip car's run wider rims too they probably just didn't care.:fruit:

[SXIV]

That is an OLD article. That CA has 650bhp now and it's owned by a different person. Japanese Performance (a UK magazine) had a feature article on it.

The car was broken up and sold of as parts ages back

[Behind Horizon]

Speaking of Horsham... I think I am just going to bite the bullet and order their Stg 2 eprom. I am sick of messing with Romeditor trying to get a decent tune out of this motor. Oh, and when the hell did you get a 20G?

I would recommend you http://www.h-dev.co.uk/ they are selling very good eproms... :bigok:

[boosteds13]

I would recommend you http://www.h-dev.co.uk/ they are selling very good eproms... :bigok:

You're kidding me, right?