PDA

View Full Version : Parting '93 S13 Hatch White ext Grey Int


Rogue240sx
01-19-2007, 11:16 AM
Parting out has recommenced, I have a lot of stuff. The chasis has rust and the engine is blown it's time to move on to a different S13. I'm going to go with a U-pull-it type of deal(unless the part you want is easy enough to get off or you want to pay me enough to pull it). If you want suspension componets you're either going to have to take the whole chasis or rig it up so it can still roll. The car is in a garage that's heated, and I have a fair amount of tools. PM me for details or to make an offer.

few things i have pulled already:
Pair of headlight assemblies
Hood
front and rear bumpers
200amp Iraggi alternator

Things that aren't pulled but may be of interest:
VLSD Diff
KYB AGX (need something to put in the car after so it can roll)shocks and 2" lowering springs (dropzone I think, handled well)
5spd parts (with ACT street strip clutch and CM light wieght flywheel) Tranny has worn synchros in third and will occassionly grind if you dont match your revs well.
Hotshot Headers Ceramic Coated (EGR block off plug included)
misc. engine parts
Decent Gray seats, no driver's side tear, but the seats are wrinkled
Doors PW PDL ( don't have the timer module i don't know what the fuck the original owner did with it) You don't get the interior door panels
i'm keeping the manual seatbelt unless you have a good offer
SE wheels if you trade me steelies and money
ECU
there's more, it was a good running car until the engine blew. Just ask.

dorkjoey240
01-19-2007, 01:13 PM
how much for passenger fender inner cover I need one ASAP. how much for VLSD Diff price plz?

Rogue240sx
01-19-2007, 08:34 PM
inner fender? do you mean the wheel well? The front is worn from the tire hitting it.

$250 for the VLSD and shipping which probably isn't going to be cheap.

dorkjoey240
01-19-2007, 10:21 PM
inner fender? do you mean the wheel well? The front is worn from the tire hitting it.

$250 for the VLSD and shipping which probably isn't going to be cheap.
just cover protects inside of it. hmm...

MURPHY
01-19-2007, 10:25 PM
price for intake maf adapter and filter? price of agx's (i have stock ones if ya need em) shipped to 22407

na_isbest
01-20-2007, 03:08 AM
Price for header? DE or not ??

OperationSr20
02-14-2007, 09:23 PM
Bump for great seller!!!

Thanks for the intake!

na_isbest
02-15-2007, 05:33 AM
Price for header? DE or not?

dxs080jpgex
02-15-2007, 07:30 AM
i need a gas tank....... lmk if u can do that

Rogue240sx
02-15-2007, 02:40 PM
Price for header? DE or not?
$170 shipped made for KA24DE

i need a gas tank....... lmk if u can do that
let me see how hard it is to get out

I also have a fairly new 255lph walboro fuel pump that I can take out of the car.

dxs080jpgex
02-15-2007, 02:42 PM
maybe we could work out a deal
and to take it out u just remove the fuel pump shit and then 2 straps on the tank... i think

Rogue240sx
02-15-2007, 02:59 PM
maybe we could work out a deal
and to take it out u just remove the fuel pump shit and then 2 straps on the tank... i think


I'll take a look at it this weekend and see what I can work out.

OperationSr20
02-15-2007, 04:08 PM
J, how much are you looking at getting for the Fuel Pump/Harness? PM me with a quote to 60016.

Skinner
02-15-2007, 06:28 PM
how many miles are on the kyb agx's? and how much? pm me!!

krazyfil
02-16-2007, 01:12 AM
how much for the header... its a 421 piece right? and how much for shipping to 93309

s13gold
02-16-2007, 02:46 AM
rearr seat belt assembly.....????

chingalong
02-16-2007, 07:04 PM
$10.00 for both shipped to LOS ANGELES CA 90041

LMK Thanks.

Rogue240sx
02-16-2007, 11:30 PM
how much for the header... its a 421 piece right? and how much for shipping to 93309
$170 shipped

rearr seat belt assembly.....????

make an offer


Hatch is SOLD

Mdl_Pin0y
02-25-2007, 06:15 AM
Is the driver seat still up for sale?

willfong
02-26-2007, 09:37 PM
Rogue,

I just picked up a 1993 SE Coupe in gray and am currently seeking the following parts (couple of more parts added to list)...
1 - clutch slave cylinder assembly from cylinder down to clutch pedal
2 - radio to shifter dash plastic panel with shifter boot and all mounting hardware/screws (as mine are missing/broke)
3 - Door power window/door lock/recessed hand holder panel thingie (both sides if possible)
4 - Interior carpet in good condition
5 - Antenna and motor
6 - Hood release complete cable

Please let me know if you might have any of these items.

Thanks,
Will

s13slider44
02-27-2007, 01:16 PM
do you happen to have the ignition cylinder and steering column cover. Some f*ck$r tried to steal my car. They failed but, they broke the ignition cylinder. If you could give me the price shipped to 10475 it would be greatly appreciated.

Canaduh
02-27-2007, 01:31 PM
If will fong drops on the interior carpet, i'll take it. Let me know.

pileofherpes
02-27-2007, 02:20 PM
How much do you want for the front bumper shipped to 76051?

I want it.

Chez
02-27-2007, 04:22 PM
is there a sunroof? pm me

Rogue240sx
02-27-2007, 04:36 PM
If will fong drops on the interior carpet, i'll take it. Let me know.
pms being sent

carpet is useless.

240sx_sr20det
02-27-2007, 04:46 PM
how much for the black trim piece around the pop up headlights??... pm me pleaseee

s13slider44
03-01-2007, 12:24 PM
i really would like to know about the ignition cylinder.

sliEighty
03-01-2007, 02:07 PM
i need the radio bracket and tray... shipped to 17033

Rogue240sx
03-01-2007, 04:57 PM
radio bracket not available. I have the column plastics your going to have to wait for the ignition as I don't have the means of getting it off right yet
(it has the wierd ass cone screws in it)

86301s13
03-01-2007, 06:25 PM
front right lower control arm?

yfz460
03-01-2007, 07:01 PM
Where exactly is the rust on this chassis? Is the the usual frame rails/shock towers up front rotted out, or is there holes/rot in the floor and rear of the car as well?

synjin
03-03-2007, 11:05 AM
how much for the gauge cluster shipped to 80134?

s13slider44
04-09-2007, 04:46 PM
how much for the center console trim piece shipped to 10475?

Thanx