(3) N60 MAFs w/pigtails - great upgrade for SR KA RB motors

[ChicagoS14]

PRICE CHANGE!

I have for sale (2) N60 MAFs w/ pigtails. IN EXCELLENT CONDITION, pulled from Maximas.

These are 80mm Diameter and 4 bolt flange. Perfect condition, it is perfect for a KA-T or SR20DET or RB25DET swaps. This mass air flow sensor can support up to about 325-350whp. Great upgrade for stock MAF and a lot CHEAPER then N62 (300zx) maf!!!!

I AM ASKING $45.00 SHIPPED EACH, OBO !

http://www.midweststreets.com/images/forsale/maf%20001.jpg
http://www.midweststreets.com/images/forsale/maf%20002.jpg
http://www.midweststreets.com/images/forsale/maf%20003.jpg
http://www.midweststreets.com/images/forsale/maf%20004.jpg
http://www.midweststreets.com/images/forsale/maf%20005.jpg
http://www.midweststreets.com/images/forsale/maf%20006.jpg
http://www.midweststreets.com/images/forsale/maf%20009.jpg
http://www.midweststreets.com/images/forsale/maf%20010.jpg
http://www.midweststreets.com/images/forsale/maf%20011.jpg
http://www.midweststreets.com/images/forsale/maf%20012.jpg




I HAVE SOLD ITEMS ON HERE BEFORE, I AM ALSO PAYPAL VERIFIED [ [email protected] ]. ITEMS LOCATED IN CHICAGO IL, CAN PICKUP IF YOUR LOCAL. ANY QUESTIONS CONCERNS YOU CAN EMAIL ME AT: [email protected] or AIM me @ EuroPL

[FusionR240sx]

$25 picked up?

[ChicagoS14]

Anybody ? They are in good condition with pigtails

[ChicagoS14]

Looks like most of them will be picked up locally so they should all be gone.... so for now consider all of them SOLD

[drift freaq]

An N60 maf is the same thing as a stock RB25 maf. Which is a E60 and it will not flow 350whp. the N62 z32 maf is a upgrade for the RB25 and it will flow 350whp

[ChicagoS14]

I said up to... I wasnt too sure... SORRY... regardless still an upgrade to a stock 240SX MAF and cheaper then an N62....

[ChicagoS14]

Bump 2 Still For Sale!!!!

[pbcstylez]

i'm interested PM me

[ChicagoS14]

Check your PM

[s13gold]

pm'd you......

[ChicagoS14]

pm'd you......

I dont believe I got your PM.... and 1 is already sold so only 1 left.

[youngmanvr4]

Do you wire these the same as the N62 MAF's? Or hows the wiring work?

[ChicagoS14]

INSTALL:
The N60 plug has 6 pins instead of 4 like the KA. Pins are,
A= Blank (not used)
B= Signal wire to KA signal (white)
C= Ground in engine bay
D= Ground to KA wire (black)
E= 12v wire to KA 12v (black/white stripe)
F= Blank (not used)

If you wire both grounds to the 1 KA ground wire it will NOT work properly. This is also the proper wiringl for a z32/j30 MAF because plugs are the same.
Thats all that I know of as far as wiring... hope this helps

[kouki_180]

a picture would be great for the wiring diagram

[Future240]

This thread is from 2007.:lockd: