Wheel fitment whore thread (Stretch/Flush) *NO SPECS, NO POST!*

[mrmephistopheles]

This is just for you sexy beasts who love to have flush wheels on their wheels.
No chewbacca-spec sunken battleship shadow offsets here. We're talking micro minimal millimeters of clearance between lips and fenders.

Non compliance will be met with deletion.

Let's get the ball rolling!


Oh yeah, post your wheel specs (spacer specs too) and alignment info if you know.
Body mods (if not obvious) should be mentioned as well.




'10 Update

1. Stay on topic. Private conversations don't belong here.
2. Don't post lame setups.
3. Make sure you post sizing information and fitment necessities (IE fender rolling/overfenders).
4. Share your pictures, but don't spam. We don't need to see a load of pictures of your car over the course of a given day. It's not about the car, it's about the wheels/fitment.
5. Report lameness/flaming with this cool little icon that's located in every post - http://icandy.zilvia.net/img/zilvia/buttons/report.gif.

[ayuaddict]

weak size wheels and tires, 15x8. 195/60s. pretty terrible but its pretty close to the fender (flare).

http://a501.ac-images.myspacecdn.com/images01/19/l_00406c84bef539c06d5bc646c8e08f64.jpg

[McRussellPants]

my fitment is pretty berry eating at the moment.


need to fiddle with cambers.

[amplifi3d]

http://img.photobucket.com/albums/v187/amplifi3d/pink_s132.jpg
18x9.5 -20
&
18x11.5 -20 ? :o

http://img.photobucket.com/albums/v187/amplifi3d/DSCN2850.jpg

[chmercer]

http://img.photobucket.com/albums/v479/chmercer/IMG_0720.jpg

[markyboi]

can i join? its not the low down thread anyways..

http://i17.photobucket.com/albums/b73/markyboi_/200612221517_00135.jpg

[mr_240sx]

http://i5.photobucket.com/albums/y172/mr_240sx/89%20nissan%20240sx/Dsc00640.jpg

http://i5.photobucket.com/albums/y172/mr_240sx/89%20nissan%20240sx/Dsc00653.jpg

[usdm180sx]

This was before I lowered the front:
http://i24.photobucket.com/albums/c5/ncarpio1/DSC00074.jpg
http://i16.photobucket.com/albums/b27/Gangsta_S14/DSCF1458.jpg

[Slidin240Wayz]

Uras NS01
Front- 17*9+30; 10 mm spacer and hammered lip

Rear- 17*9.5+15; pull


http://i7.photobucket.com/albums/y264/Cdoria/DSCN0059.jpg

http://i7.photobucket.com/albums/y264/Cdoria/DSCN0058.jpg

http://i7.photobucket.com/albums/y264/Cdoria/DSCN0046.jpg


Carlos

[upSLIDEdown]

18x10 +13 with a 235/40 Dunlop Direzza DZ101 on the rear of my S13 with slightly pulled fenders with -3.75 -4 ish * of camber...

http://www.msprotege.com/members/[email protected]/Byrans%20jank.JPG

[kingsol]

S13 - 17x9 +12, 235/40, roll, 2.2?, Safeway ha!

http://xd3.xanga.com/5d7d07ea3813291499124/z63600588.jpg

[RHDintegXSI]

not nearly as nice as 17's but heres mine anyway

15x7's 0 offset (rear) 205/50/15
fender roll/very slight pull (accidental)
untouched alignment/camber till i can fix my frozen bolts issue

http://i61.photobucket.com/albums/h52/sinfulintegxsi/DSC03340.jpg

http://i61.photobucket.com/albums/h52/sinfulintegxsi/DSC03342.jpg

not a bad start imo esp for 15's

[clutch kick drifter]

18x9+20 all around... rear has only the lip rolled in, fear of cracking paint backed me away from getting anything more for a bigger tire. Front clearance http://photos-622.ak.facebook.com/ip002/v62/80/99/503587369/n503587369_14622_465.jpg
Rear , its not a lot with a 225 45 18 http://photos-623.ak.facebook.com/ip002/v62/80/99/503587369/n503587369_14623_780.jpg

[status:one]

ill post up more pics when the car is finished and when the I lower the coilovers more.

19x10.5 -8
265/35/19
new fender is approximately 3" wider than stock.
don't know the camber.
http://i85.photobucket.com/albums/k76/moog177/Bluebeard/DSC00025.jpg

[TheSquidd]

http://www.squidd.org/Images/squiddbuild/_DSC8412.jpg

Not cool in any way, but it's got decent fitment.

17x9 +17
4 degrees of camber
~10mm pull
25mm spacers
215/45/17

Seriously you all need to post way more specs otherwise this is all useless and just another picture thread...

[Dousan_PG]

http://i29.photobucket.com/albums/c252/dousan/new%20s13/DSC01916.jpg

17x9 0 offset
215/40/17
about -3 camber
20mm wide fenders

rear is
18x10.5+15 245/40/18
+3mm spacer
30mm wide rears
camber is about -2

[snatch13]

What do you mean? I gave the size and offset? I'm not sure on the tire size, they are a pretty homo stretch though. The front fenders are a 20mm and the rears are 50mm

Alright, thats part of the info I was looking for. I can guess camber by looking, but I think people should follow a template which should be put in the first post.

Like this (taken from cfr, I don't think Simba will mind if I use his specs)

Car: S13 Hatch
Wheel Front: 17x9.5 +12 Gram Light 57S (gold) 225/45/17 (in pictures, switching to 235/40/17)
Wheel Rear: 18x9.5 +12 Gram Light 57S (gold) 235/45/18 (in pics, switching to 235/40/18)
Wheel Rear: 18x10 +18 Work Equip (white) 225/40/18 (in pics, swithcing to 235/40/18)
Body Front: 20MM Overfenders
Body Rear: 30mm Overfenders (pushed in a little so they are less than 30mm)
Spacers Front: None
Spacers Rear: None (switching to 15mm)
Camber Front: 3*
Camber Rear: ~2*
Castor: 8*

Then show us the money shot. This is just a suggestion, take it or leave it. Without it, it just looks like another picture thread.

[liv2drift045]

http://memimage.cardomain.net/member_images/2/web/2534000-2534999/2534924_16_full.jpg

f:17x8 +8 (spaced to -4) 215/40 (front 20mm over fenders as well)
r:17x9 +12 (spaced to +7) 215/45

not sure on camber honestly... camber plates on front are maxed but the camber bolt is not so....
rear is probly -2.5 ish.. .need to bring it back out sum to get the dollar bill effect haha

[KiDyNomiTe]

http://img.photobucket.com/albums/v293/kidynomite/Grip%20Gambler%20Pictures/purp4.jpg
http://img.photobucket.com/albums/v293/kidynomite/Grip%20Gambler%20Pictures/lip3.jpg
http://img.photobucket.com/albums/v293/kidynomite/Grip%20Gambler%20Pictures/08ik5.jpg


Front:
Wheel: 17x9.5 +12 w/ 15mm spacer = 17x9.5 -3
Tire: 235/40
Fenders: 20mm Fronts
Camber: -3.5

Rear:
Wheel 18x9.5 +12 no spacer
Tire: 235/40
Fender: 30mm Origin Fender pushed in.
Camber: -2.2

[gsracer]

work meister s1

18 by 10 +18
18 by 11 +18

275 fronts
305 rears

stock fenders and quarters


http://img.photobucket.com/albums/v344/gsracer/WORK%20S1/IMG_0197.jpg
http://img.photobucket.com/albums/v344/gsracer/WORK%20S1/IMG_0192.jpg
http://img.photobucket.com/albums/v344/gsracer/WORK%20S1/IMG_0191.jpg
http://img.photobucket.com/albums/v344/gsracer/WORK%20S1/IMG_0190.jpg
http://img.photobucket.com/albums/v344/gsracer/WORK%20S1/IMG_0189.jpg
http://img.photobucket.com/albums/v344/gsracer/WORK%20S1/IMG_0188.jpg

[gsracer]

20 by 11+ 30 with the first pull on 305-25-20's with some camber. I have since pulled the rears an additional 15mm to not run any camber well 1.5 degrees

http://img.photobucket.com/albums/v344/gsracer/IMG_2925.jpg

http://img.photobucket.com/albums/v344/gsracer/IMG_2919.jpg

http://img.photobucket.com/albums/v344/gsracer/IMG_2918.jpg

http://img.photobucket.com/albums/v344/gsracer/IMG_2920.jpg

[Johny5]

http://img.photobucket.com/albums/v338/kidnrg/DSCN0220.jpg

probably what my car will stay at for awhile
18x9.5 +4 -.75ish camber 225/40/18 Nexen mild pull
if toe looks off its because none of my arms are on yet except for old ruca's

[koontek]

Hey Guys,
I pick up these Racing Hart C4's from my friend for dirt cheap but not 100% sure they would fit my car. Let me know what you guys think it will take to fit my S13 Hatch with stock fenders.

Front 18X9 + 8MM
Rear 18X10 + 5MM

Here are some test fitment pictures. It looks like the rears will fit with some rolling and pulling but i dont know about the fronts. The fronts do not clear my Z32 30mm Brakes so some spacers will be needed in the front (unless I shave down the calipers : ( .

Rears:


Fronts:


Yah the fronts dont look so good but yet again i didnt have the wheel push all the way up near the fender like i did in the rears. Let me know what tire size, how much camber, and how much rolling and pulling you guys think it will take to get these suckers on!

[95Kouki]

http://i25.photobucket.com/albums/c81/s14biggs/frontclean2-1.jpg

http://a863.ac-images.myspacecdn.com/images01/25/l_1038f7016773c1c56e941ae25d099d26.jpg

http://myspace-644.vo.llnwd.net/01502/44/64/1502544644_l.jpg

I know i know...i need better Wheels....

17x9 +15 w/ 235/45/17 - Front at -1.5 camber

17x10 +12 w/ 245/40/17 - Rear at -3.25 camber

[Nizzan4u2nv]

And to stay on topic.....

This is all with -3 front and -3.5 to -4 rear


17x9 -3 (15mm spacer) all around, 225/45/17 st115
http://img131.imageshack.us/img131/6606/p10100034xs.jpg


17x9 +0, 17x10 +12 205/45, 235/45 federal 595
http://img395.imageshack.us/img395/1645/p1010012sd3.jpg

17x9 -6 all around, 205/45/17 federal 595
http://img182.imageshack.us/img182/2537/p1010057no6.jpg

17x9 +5 17x10 -1 235/40/17 fm901 all around
http://memimage.cardomain.net/member_images/8/web/2216000-2216999/2216221_32_full.jpg

Gonna paint this piece of junk and start driving it again.

[Nizzan4u2nv]

I shouldnt really comment on tire wear because the toe was jacked up for a long time before I got an alignment. Although, after 0 toe and -3.5 its not too bad daily driving. Inside still wears slightly faster then outside, but its not as bad as some make it seem. -4 and some toe in sucks balls for inner wear though.

17x9 +12 (-3 with 15mm spacer) were gram light 57 pros.
http://img403.imageshack.us/img403/4972/p10100090er.jpg
17x9 -6 are work VSXX
http://img182.imageshack.us/img182/4116/p1010052nk3.jpg

[McRussellPants]

http://i10.photobucket.com/albums/a120/SILMASTERFLEX/carz007.jpg

Icetown fitment.

[Team Rootbeer]

17x9 +0 Hotwheels
15mm spacer in the rear
215/40 fr
215/45 rr

rolled front, graveyard pull rear.
http://i4.photobucket.com/albums/y119/teamslideshow/newwheels009.jpg
http://i4.photobucket.com/albums/y119/teamslideshow/newwheels029.jpg

[mrmephistopheles]

Ok, maybe I wasn't clear - keep this thread on topic.
If you want to know what wheels are on a certain car, ask in the 'identify this (http://www.zilvia.net/f/showthread.php?t=122134)' thread.
This thread is about wheels with known dimensions and make, and how they fit flush on S-chassis. Nothing else.

[gsracer]

Once again

18 by 10 +18
18 by 11 +18

havent got my new tires yet so threw some old michelins i had laying around 265 front 285 rear. It fit with plenty of room consequently camber is currently 2.0 front 1.0 rear.


http://img.photobucket.com/albums/v344/gsracer/WORK%20S1/IMG_0220.jpg

http://img.photobucket.com/albums/v344/gsracer/WORK%20S1/IMG_0219.jpg

http://img.photobucket.com/albums/v344/gsracer/WORK%20S1/IMG_0218.jpg

http://img.photobucket.com/albums/v344/gsracer/WORK%20S1/IMG_0217.jpg

http://img.photobucket.com/albums/v344/gsracer/WORK%20S1/IMG_0215.jpg

http://img.photobucket.com/albums/v344/gsracer/WORK%20S1/IMG_0215.jpg

[Johny5]

http://img.photobucket.com/albums/v338/kidnrg/DSCN0010-1.jpg

http://img.photobucket.com/albums/v338/kidnrg/DSCN0003-2.jpg

front: 18x9.5 +4 w/ 225/40/18 no names (until alignment) -2.5ish camber again slight toe-in +20 b*magic front fenders

rear: 18x9.5 -4 w/ 225/40/18 nexen3000 -1ish camber slight slight toe-in fender pull

[AzNCmB]

http://img240.imageshack.us/img240/281/dscf0760smallmedium1fv.jpg (http://imageshack.us)
http://img.photobucket.com/albums/v695/azncmb/Wheels/hotwheels/Drift_Attack_1_8_26_06_003.jpg
when i was drug free....
17x9 +0, 235/40 all around...

http://img.photobucket.com/albums/v695/azncmb/KIM.jpg
http://img.photobucket.com/albums/v695/azncmb/Wheels/CIMG3127.jpg
http://img.photobucket.com/albums/v695/azncmb/Wheels/CIMG3124.jpg
http://img.photobucket.com/albums/v695/azncmb/Wheels/SANY0187.jpg
http://img.photobucket.com/albums/v695/azncmb/Wheels/SANY0199.jpg
f:18x9.5 +7, but effectively +0 because of 7mm spacer for brake clearence, tire: 225/40/18
r: 18x10 +7
tire: 235/40/18

http://img.photobucket.com/albums/v695/azncmb/Wheels/brakeclear-7mmspace.jpg
sheet of paper caliper/wheel clearence....

i need to fix my car and get better pics...

[Nizzan4u2nv]

ah...so ur the one that brought the price up...:)

well, anyway...man, ur car's clean....i miss my navan front and i want good paint:(
its in the backyard, to0 lazy to fix it...

Thanks man. I hear ya on good paint. Mine is past due.

And to keep on topic and contribute...

17x9 -1(6mm spacer) super low disk, federal 595 205/45/17
18x9.5 +10 super low disk, federal 595 225/20/18

Camber, -3.5 rear, -3 front
http://img145.imageshack.us/img145/7994/p1010003ck9.jpg

18s all around very soon.

[vvtisupra]

Did a little trade up with nissan4u2nv
But there is 1 twist. 300zx 30mm brakes on a low disc isn't allowed so I had to put a 15 mm spacer
17X9-21, 17X9 -6 (gonna get extended studs and put a 10 mm to balance things out.

http://a930.ac-images.myspacecdn.com/images01/37/l_35e9ba9304eeebb415284693230af9b1.jpg
http://a61.ac-images.myspacecdn.com/images01/43/l_38dbe78c91dc11b9c2ef484a7a56f16c.jpg

[srpowereds14]

Just for giggles i tried putting my wheels on my bros car wheels are VSKF 18x9 +13 and 18x10 +13
http://img.photobucket.com/albums/v335/JCE10_707/PICT0187.jpg
http://img.photobucket.com/albums/v335/JCE10_707/PICT0188.jpg

[amplifi3d]

http://i38.photobucket.com/albums/e105/jtnaks/Picture544.jpg

oh shit son, new wheels. pink on pink 17x9.5 -15 and 17x9.5 -30. 215/40/17 all around.

[amplifi3d]

is that a vent on the rear 1/4 on the hatch?

no i guess its just a shadow from the picture, here is the specs on the fastback's wheels: 18x9 +22 and 18x10 +22 with 30mm spacer.

http://i38.photobucket.com/albums/e105/jtnaks/Picture549.jpg

[mrmephistopheles]

Ok, maybe I wasn't clear - keep this thread on topic.
If you want to know what wheels are on a certain car, ask in the 'identify this (http://www.zilvia.net/f/showthread.php?t=122134)' thread.
This thread is about wheels with known dimensions and make, and how they fit flush on S-chassis. Nothing else.

Just deleted 20 or so shit posts from this.
I'm being very patient about this, but I won't have this thread crapped up.

If you're confused, just re-read that post a few times.

16x7 will take nothing short of a miracle (and a lot of negative offset) to fit flush) and will look like doo if it happens.

Fuck wagons. :fawk2:

[brainfood]

17x9 +18 (-7) with a 25mm spacer all around 225/45-17 front 235/45-17 rear. Soon to be 235/40-17 all around. +20mm front fenders +30mm rear fenders

http://i51.photobucket.com/albums/f399/brainfood1182/parts4sale/Picture005.jpg

http://i51.photobucket.com/albums/f399/brainfood1182/IMG_0999.jpg

http://i51.photobucket.com/albums/f399/brainfood1182/New%20car%20pics/IMG_1038.jpg

[sblack13]

Glebs old wheels...
http://img145.imageshack.us/img145/4904/picture058hn5.jpg
18x9.5 -1 (front) harness relocation, and hammered fender wells/fender.
18x9.5 +14 rolled rears, fit like cake. spacers here i come
camber is -2.5
rears are on the lowest i can go (hks hiper d) fronts have more room. But it should get done.

[JSpecBnr32]

haha i remember those^ enough of those pussy positive offset's
18x10 +7 18x12 -7

http://img.photobucket.com/albums/v610/n7ck/Glebs%20House%202-14-07/DSC02265.jpg

http://img.photobucket.com/albums/v610/n7ck/Glebs%20House%202-14-07/DSC02294.jpg

http://img.photobucket.com/albums/v610/n7ck/Glebs%20House%202-14-07/DSC02297.jpg

http://img.photobucket.com/albums/v610/n7ck/Glebs%20House%202-14-07/DSC02262.jpg

thats right

[ThatGuy]

This is the Wheel Fitment Whore Thread. Not the Wheels on the floor, or in the box Thread. Post pictures of the wheels on the car or don't post.

All misc. Bullshit posts have ONCE AGAIN been deleted. Stop cluttering this up with pointless comments.

[kouki_s14]

1998 S14
Kakimoto Super N-GT (made by SSR)
17x9 +22 245/45/17 on all four
no spacers
fenders rolled, no pull
current alignment is unknown, its been a few months and i just lowered the car.
should be close to -1 front and -2 rear though

http://img101.imageshack.us/img101/7959/dsc00890eq0.jpg
http://img244.imageshack.us/img244/8454/dsc00892bl1.jpg
http://img171.imageshack.us/img171/2860/dsc00891ik6.jpg
http://img171.imageshack.us/img171/7389/dsc00893nn7.jpg

[mrmephistopheles]

Well I have a tire/wheel fitment suggestion request, I got an S13 with origin stream aero shown in pic below
Pic of unflush car/wheels

They are going to be replaced by:
Pics of wheels in boxes

This is the Wheel Fitment Whore Thread. Not the Wheels on the floor, or in the box Thread. Post pictures of the wheels on the car or don't post.

Don't know what's not clear about this. Deleting your post now.

[swayray]

18x9.5 +35 w/ 25 + 5mm spacers 225/40/18 front and 235/40/18 rear...

http://i108.photobucket.com/albums/n3/swayray/wawaside.jpg
http://i108.photobucket.com/albums/n3/swayray/ray_large.jpg
http://i108.photobucket.com/albums/n3/swayray/2.jpg

following "the trend" 17x9 +35 w/ 25 + 5mm spacers front 225/45/17, 18x9.5 +35 w/ 25 + 5 mm spacers rear 255/35/18

http://i108.photobucket.com/albums/n3/swayray/wawa/sideview.jpg
http://i108.photobucket.com/albums/n3/swayray/wawa/rearview.jpg
http://i108.photobucket.com/albums/n3/swayray/wawa/frontview.jpg

its not my car anymore though... i just gave it to my g/f...

http://i108.photobucket.com/albums/n3/swayray/wawa/driftview.jpg

my car has a new pretty driver...


i'll post pics of my new car soon....

[d*star180]

http://i94.photobucket.com/albums/l94/chicagoarea240sx/clean014.jpg
http://i94.photobucket.com/albums/l94/chicagoarea240sx/clean009.jpg
http://i94.photobucket.com/albums/l94/chicagoarea240sx/DSTARLOW005.jpg
http://i94.photobucket.com/albums/l94/chicagoarea240sx/DSTARLOW011.jpg
SSR Formula Mesh 15x8-10 with 195/50.
Stance Gr+pros all the way down with no collars removed.

[bleach8484]

Ok, Updated pics. New, resized tires.

Still need to play with camber, get aligned, and Pull the rears a bit, I rolled the lips then stopped. Looks aight to me, could be lowered a little more and need some aero, Greddy lip got F-zucked

18x9 +8
18x10 +5
225/40 and 245/40

http://img.photobucket.com/albums/v335/bleach8484/PICT0028.jpg
http://img.photobucket.com/albums/v335/bleach8484/PICT0026.jpg
http://img.photobucket.com/albums/v335/bleach8484/PICT0027.jpg
http://img.photobucket.com/albums/v335/bleach8484/PICT0025.jpg

[yokotas13]

ok, since i actually have good fitment, and this isnt S chassis fitment here it is

18x9 0 with spacer
18x10 +20

i had to roll and pull all fenders. but when my roller comes in, im going ot pull the rear and front a tad more.
http://farm1.static.flickr.com/176/400501941_265dd452bc.jpg
http://farm1.static.flickr.com/163/400501903_42836c68bd.jpg
http://farm1.static.flickr.com/166/400501855_f865a360d8.jpg
http://farm1.static.flickr.com/167/400501811_a1f0a65d3f.jpg

[FusionR240sx]

F 17x9+15 still need to be slammed... but pretty damn flush with 225/45's
R 17x10+12 rear a lil more tweeking. hammered lip right now, need pull.

http://i81.photobucket.com/albums/j220/FusionR300zx/240sx/DSC00773.jpg
http://i81.photobucket.com/albums/j220/FusionR300zx/240sx/DSC00772.jpg
http://i81.photobucket.com/albums/j220/FusionR300zx/240sx/DSC00771.jpg
http://i81.photobucket.com/albums/j220/FusionR300zx/240sx/DSC00770-4.jpg

[ThatGuy]

Work Equips.
18x9 +15mm front with 225/40 BFG g-Force Sport
18x10 +35mm rear with 245/40 BFG g-Force Sport
SPL KTS coilovers.
1 collar removed in the front
1/4" spring droop in the rear
Fenders Rolled and Pulled all around
http://img337.imageshack.us/img337/418/16879725ue9.jpg
http://img19.imageshack.us/img19/2337/73483428nr5.jpg
http://img19.imageshack.us/img19/5245/64233819sf1.jpg
Ground clearance. I may try to drop it a little further. We'll see.
http://img337.imageshack.us/img337/7485/25480222ng2.jpg
http://img477.imageshack.us/img477/4602/62357365ec2.jpg

[articdragon192]

18*9 +15 235/40-18 stock fenders

http://img.photobucket.com/albums/v293/ArticDragon192/CAM_0226.jpg
http://img.photobucket.com/albums/v293/ArticDragon192/CAM_0225.jpg
http://img.photobucket.com/albums/v293/ArticDragon192/CAM_0230.jpg

[S13FREEAAK]

17x10.5 +2 275/40/17 R-comps

30mm Flares

http://i20.photobucket.com/albums/b207/S13FREEAAK/coils004.jpg
http://i20.photobucket.com/albums/b207/S13FREEAAK/coils006.jpg
http://i20.photobucket.com/albums/b207/S13FREEAAK/coils020.jpg

[Siizzzoooo]

SSR D5R
18x9 +0mm 225/40
18x10.5 -26mm 265/35

still got some poke goin on
http://i21.photobucket.com/albums/b260/sizzo2/Paint%20Job/IMG_0977.jpg
http://i21.photobucket.com/albums/b260/sizzo2/Paint%20Job/IMG_1014.jpg
http://i21.photobucket.com/albums/b260/sizzo2/Paint%20Job/IMG_1007.jpg

[DoriftoSlut]

17x9.5 -7 (+3 w/ 10mm spacer) 18x10.5 -11 (+6 with 5mm). 215/45/17 and 245/40/18.
http://img.photobucket.com/albums/v238/Pink_GodziRa/FC3S/CensoredFC-1.jpg

http://img.photobucket.com/albums/v238/Pink_GodziRa/FC3S/CensoredFC-2.jpg

http://img.photobucket.com/albums/v238/Pink_GodziRa/FC3S/CensoredFC-3.jpg

[jspecusa]

18x9 +23 Wadesport front(20mm spacer so it's +3 now)
18x10 +23 Wadesport rear
front is 10mm wide fenders, rear is levispl custom rolled.
http://us.st11.yimg.com/us.st.yimg.com/I/jspec_1930_138080154
http://us.st11.yimg.com/us.st.yimg.com/I/jspec_1930_141374359
http://us.st11.yimg.com/us.st.yimg.com/I/jspec_1930_145832299

[gsracer]

some updated pics

again wheels are
WORK Meister S1 3pc
18 by 10 +18 265/35/18 front
18 by 11 +18 295/30/18 rear

stock pulled sheet metal



http://img.photobucket.com/albums/v344/gsracer/WORK%20S1/DSC_0481.jpg

http://img.photobucket.com/albums/v344/gsracer/WORK%20S1/DSC_0494.jpg

http://img.photobucket.com/albums/v344/gsracer/WORK%20S1/DSC_04981.jpg

[240trainee]

http://img.photobucket.com/albums/v505/240trainee/P1000369.jpg
http://img.photobucket.com/albums/v505/240trainee/P1000389.jpg

17x8 +8 in front
17x9 +12 in back

215/40 17 Federal SS595 front
235/40 17 Federal SS595 back

About 3* camber all around, front fenders were hammered off the car, so the fenders are as rolled as they will ever get. Rears are rolled, and a very slight pull, I think I'm going to pull them more, I don't want to run much more than 3* camber in the rear.

[vvtisupra]

still rocking the 15 mm spacers on 17X9-6 making it -21 just to clear brakes. gonna go with q45 soon I hope. You like my m3 giggle

http://i132.photobucket.com/albums/q23/pornstarSR/hardparking%20meet%203-31-07/DSC00791.jpg

[joecar]

a pic of my car on the way back from the shop Gull flames 17 X 9.5 +27 :ugh: and 18 X 9.5 +15 rear. The fronts are hitting the coilovers as expected but heres a crappy cell phone pic. its a little compressed from being tied down on the trailer but it looks pretty close to what your seeing off the trailer. Im running 235 40's all around

http://www.d-faction.com/pictures/mike/joe2.jpg

http://www.d-faction.com/pictures/mike/joe1.jpg

[twisted_240]

ok pussys
crazy town fitment
70mm Widebody BN Blister REAL DEAL
no fake shit

Work Equip
18x10.5 -39

http://img.photobucket.com/albums/v154/twisted_240/EquipTestFit-1.jpg

http://img.photobucket.com/albums/v154/twisted_240/EquipTestFit-2.jpg

http://img.photobucket.com/albums/v154/twisted_240/EquipTestFit-5.jpg

http://img.photobucket.com/albums/v154/twisted_240/EquipTestFit-9.jpg


Work VS-XX 18x10 -42 (-12 with 30mm)

http://img.photobucket.com/albums/v154/twisted_240/VS-XXTestFit-1.jpg

http://img.photobucket.com/albums/v154/twisted_240/VS-XXTestFit-2.jpg

http://img.photobucket.com/albums/v154/twisted_240/VS-XXTestFit-4.jpg

http://img.photobucket.com/albums/v154/twisted_240/VS-XXTestFit-3.jpg

^^ i think i had my jack on the back part of the rim so it pushed it out, just looks like more camber

http://img.photobucket.com/albums/v154/twisted_240/VS-XXTestFit-6.jpg

http://img.photobucket.com/albums/v154/twisted_240/VS-XXTestFit-7.jpg

could fit if i had more camber and a 215/40/18

Work Meister 18x9 +4 (+9 with 5mm Spacer)

http://img.photobucket.com/albums/v154/twisted_240/MeisterTestFit-1.jpg

http://img.photobucket.com/albums/v154/twisted_240/MeisterTestFit-2.jpg

http://img.photobucket.com/albums/v154/twisted_240/MeisterTestFit-4.jpg

17x9 +0 215/45/17
F: -3 camber roll/bulge off car - i flared it off the car, its got the same effect as radiousing fenders +7caster
R: -2.3 camber , roll and pull, slam town
minor rubbing issues, would be solved with a 215/40 tire
with overfenders it sits in a tiny bit i think, then again im picky

tire tuck in da front jawsome

http://img.photobucket.com/albums/v154/twisted_240/DSC04401.jpg

http://img.photobucket.com/albums/v154/twisted_240/DSC04402.jpg

http://img.photobucket.com/albums/v154/twisted_240/DSC04354.jpg

[KiDyNomiTe]

http://img.photobucket.com/albums/v293/kidynomite/Grip%20Gambler%20Pictures/DSC01356.jpg
http://img.photobucket.com/albums/v293/kidynomite/Grip%20Gambler%20Pictures/DSC01354.jpg
http://img.photobucket.com/albums/v293/kidynomite/Grip%20Gambler%20Pictures/DSC01357.jpg

18x10 +3 (+18 w/ 15mm spacer) 225/40/18

It rubs about as much as my 17s, which is a lot, but it looks awesome, might run these up front for a little while.

[Turbo24sxt]

here is mine ~ 17x9 +17 offset ~ Work Emotion CR Kai ~ I know pussy positive offset but hey its as fluch as i can go!!! :bite:

http://i74.photobucket.com/albums/i246/Turbo24sxt/doitson.jpg

[tknbkthrsdy4anfg]

Not good fitment at all, just posting this for info
17x10 +12 FN's with 245 45 Ecsta SPT's
-3 degree's camber
Roll, No pull
http://i48.photobucket.com/albums/f218/tknbkthrsdy4anfg/P4130025.jpg

[supracrazy]

Work equip 01
18x9+15 with 5mm spacer 245 45
18x10.5+20 (295 35) (265 35)

http://i20.photobucket.com/albums/b204/supracrazy/My%20Car/9054e067.jpg
http://i20.photobucket.com/albums/b204/supracrazy/My%20Car/DSC00971.jpg
http://i20.photobucket.com/albums/b204/supracrazy/My%20Car/ba20a97d.jpg



295
http://i20.photobucket.com/albums/b204/supracrazy/My%20Car/a94a7e19.jpg
http://i20.photobucket.com/albums/b204/supracrazy/My%20Car/adef543b.jpg
http://i20.photobucket.com/albums/b204/supracrazy/My%20Car/6be6be4a.jpg
http://i20.photobucket.com/albums/b204/supracrazy/My%20Car/DSCN1243.jpg
http://i20.photobucket.com/albums/b204/supracrazy/My%20Car/DSCN1242.jpg

265
http://i20.photobucket.com/albums/b204/supracrazy/My%20Car/DSC00966.jpg
http://i20.photobucket.com/albums/b204/supracrazy/My%20Car/50c07bd1.jpg

[R33GTS-T]

Wheels:
Emotion CR Kai 17x9 +17 all around
Tires:
Falken RT-615
235/40 up front
255/40 out back
Front alignment:
-3* camber
1/8" toe in
7.0-7.5* caster
Rear alignment:
-2* camber
1/8" toe in
Fender mods:
roll and pull up front, wire tuck on driver's side (just to be safe...doing passenger side this weekend)

roll and very slight pull on the rear

http://i14.tinypic.com/2mz9wtd.jpg
http://i16.tinypic.com/3zr2gly.jpg
http://i14.tinypic.com/47lxwxy.jpg

[R33GTS-T]

Wheels:
5Zigen FNO1R-C 17x9 +15 17x10 +12
(borrowed from a friend with a zenki s14)
Tires:
Falken ST115
225/45/17 front
245/45/17 rear
Front alignment:
-3* camber
~6.5* caster
1/8" toe in
Rear alignment:
-2* camber
1/8" toe in
Fender mods:
stock front fenders
roll and very slight pull on the rear

http://i14.tinypic.com/2hqry81.jpg
http://i11.tinypic.com/42ukjfk.jpg
http://i17.tinypic.com/450xv9t.jpg

- Daniel

[TokyoNights]

http://www.d-faction.com/pictures/mike/IMGP0824.JPG
http://www.d-faction.com/pictures/mike/IMGP0815.JPG
17x9 0 235/40/17 615s
18x9.5 -13 235/40/18 dz101s

[swayray]

car to the left:
18x9.5 +35 - 30mm spacer 255/35/18 DZ101 (30mm pull)

car to the right:
17x9 +35 - 30mm spacer 215/45/17 Yokohama ES100 (rolled)

http://i108.photobucket.com/albums/n3/swayray/wawa/twins2.jpg

[ThatGuy]

There is no need to quote his pictures to ask him a question, and you can likely find out what kind of bumper it is by reviewing his past posts. You can also PM him directly to find out, rather then asking a question in this thread.

[markyboi]

17x9+17 225/45/17 camber is -2.5


http://i17.photobucket.com/albums/b73/markyboi_/200704291905_00276.jpg

[swayray]

trying out these 15lbs wheels.... let me see... what are they.... honda size/offset 17x7.5 +38 w/ 25 + 10mm spacers and 235/40/17 Dunlop Sp Sport Maxx tires...

http://i108.photobucket.com/albums/n3/swayray/wawa/DSCN1230.jpg

http://i108.photobucket.com/albums/n3/swayray/wawa/DSCN1231.jpg

[TheSquidd]

Step 1, get flush to the point of minor rubbing.
Step 2, roll fenders a little bit.
Step 3, buy new wheels that rub because you miss it.

http://violentrunning.squidd.org/galleries/d/3832-1/_DSC0464.jpg
http://violentrunning.squidd.org/galleries/d/3834-1/_DSC0465.jpg

FN01-RC 17x10 +25 (+25 spacer, effective 17x10 +0) 4 degrees of camber.

[eds13]

teaser pic, gonna get some more this weekend after i go a little lower.
17x8+5 and 17x9+11
225/40's and 235/40's. no idea what camber is

http://x73.xanga.com/4edd765a16c33121605078/m87677057.jpg

[samplesurf]

they arent the best pics cause they were taken in a hurry but better ones will come

wheels are weds sa70s 18x9 +20 and 18x10 +18 w/ 225/40 and 245/40

http://a818.ac-images.myspacecdn.com/images01/30/l_3ae5c962108adca9d8167584e30fb049.jpg

http://a309.ac-images.myspacecdn.com/images01/8/l_b57a3f9dd679d624b6a3029b3479dd0c.jpg

http://a385.ac-images.myspacecdn.com/images01/29/l_b4ad02b45df7f02f8756f031a4648480.jpg

http://a940.ac-images.myspacecdn.com/images01/38/l_55f5520518af741b144444e3cd509953.jpg

http://a284.ac-images.myspacecdn.com/images01/14/l_1ccf2a4a4c4be48b6c7f5d8a36cf2b1b.jpg

[FusionR240sx]

front lowered with q45 brake setup.
http://i81.photobucket.com/albums/j220/FusionR300zx/240sx/DSC01145.jpg
http://i81.photobucket.com/albums/j220/FusionR300zx/240sx/DSC00892.jpg
http://i81.photobucket.com/albums/j220/FusionR300zx/car%20meet%20pics/DSC01169.jpg
17x9+15 F 225/45
17x10+12 R 255/45
need rear pulled and it will be lowerr.

unfortunately had to sell my stance GR pro's to get my bottom end rebuilt.

[BobbyDigi]

18x10 -2 with Bmagic 30 milli's

http://img.photobucket.com/albums/v202/s15driftking/Picture534.jpg

http://img.photobucket.com/albums/v202/s15driftking/Picture535.jpg

http://img.photobucket.com/albums/v202/s15driftking/Picture533.jpg

http://img.photobucket.com/albums/v202/s15driftking/Picture532.jpg

http://img.photobucket.com/albums/v202/s15driftking/Picture528.jpg

http://img.photobucket.com/albums/v202/s15driftking/Picture529.jpg

[TokyoNights]

cool shot I found
http://www.d-faction.com/pictures/mike/HPIM0310.jpg

[S13FREEAAK]

17x10.5 -5 unknown camber
30mm flares
275/40/17 r-comps

http://i20.photobucket.com/albums/b207/S13FREEAAK/firewall007.jpg
http://i20.photobucket.com/albums/b207/S13FREEAAK/firewall008.jpg
http://i20.photobucket.com/albums/b207/S13FREEAAK/firewall012.jpg

[TheSquidd]

well if I would have opened a thread about my "wheel fitment issue" I'm sure you guys would have locked it and send me to this section....

there is no way to win with you guys...:loco:



but thanks anyway



Zilvia, everyone is a moderator.

[Johny5]

http://img443.imageshack.us/img443/1467/dscn0404mu1.jpg

18x9.5 -13
235/40/18
-1.7 camber
.125 toe in
chargespeed 50mm overfender

[P_TAN]

Work 18X10 +25 235/40R18
camber 2.25
http://i191.photobucket.com/albums/z133/STRD-Pat/IMG_0088.jpg

[G_sl1de]

http://i16.photobucket.com/albums/b15/G_sl1de/kouki%20monstar/ortho.jpg
http://i16.photobucket.com/albums/b15/G_sl1de/kouki%20monstar/10.jpg
http://i16.photobucket.com/albums/b15/G_sl1de/kouki%20monstar/Duckpond5-1.jpg
http://i16.photobucket.com/albums/b15/G_sl1de/kouki%20monstar/Duckpond6.jpg

18x9.5 +12 225/40 - 20mm Msports fender
18x10.5 +7 w/35mm spacer *-28* - 255/35 50mm Msports fender
I need to go lower and get an alighnment;)

[P_TAN]

Side Shot, Work Termist TS-1
http://i191.photobucket.com/albums/z133/STRD-Pat/IMG_0087-1.jpg

[fliprayzin240sx]

http://i58.photobucket.com/albums/g254/fliprayzin240sx/Zenki%20S14/PA310052.jpg
http://i58.photobucket.com/albums/g254/fliprayzin240sx/Zenki%20S14/PA310054.jpg
http://i58.photobucket.com/albums/g254/fliprayzin240sx/Zenki%20S14/PA310053.jpg
http://i58.photobucket.com/albums/g254/fliprayzin240sx/Zenki%20S14/PA310055.jpg

Work Rezax 17x8/9s +22 all around with 12mm spacers up front to clear the brakes. Thanks Kevin...now i need to find a roller so I can lower this thing somemore...

[usdm180sx]

Old skool Work meshies 17x8 +5 215/45 and 17x9 +18 235/45 (They belong to a friend. Tires came with the wheels)
http://i97.photobucket.com/albums/l232/usdmsilvia/DietrichsWorkwheelsons13010.jpg
http://i97.photobucket.com/albums/l232/usdmsilvia/DietrichsWorkwheelsons13009.jpg
http://i97.photobucket.com/albums/l232/usdmsilvia/DietrichsWorkwheelsons13005.jpg
http://i97.photobucket.com/albums/l232/usdmsilvia/DietrichsWorkwheelsons13004.jpg
http://i97.photobucket.com/albums/l232/usdmsilvia/DietrichsWorkwheelsons13003.jpg

[idrum2loud]

http://i142.photobucket.com/albums/r96/idrum2loud/0304071317.jpg
My old corolla....lol I will have pics of the S14's fitment a.s.a.p.....

[iwearpro]

18x9.5 +35 with 225/40/18
http://img243.imageshack.us/img243/3469/picture002zt2.jpg
http://img264.imageshack.us/img264/786/picture004mb3.jpg (http://imageshack.us/?x=my6&myref=http://imageshack.us/)

[gsracer]

normally i rock work meister s1's
18 by 10 +18 265 front
18 by 11 +18 295 rear

http://img.photobucket.com/albums/v344/gsracer/WORK%20S1/DSC_0481.jpg
http://img.photobucket.com/albums/v344/gsracer/WORK%20S1/DSC_0481.jpg





just for fun

te 37 time attacks
19 by 10.5 + 17 265 on the front

Still all stock sheet metal



http://img.photobucket.com/albums/v344/gsracer/The%2014/IMG_5315.jpg
http://img.photobucket.com/albums/v344/gsracer/The%2014/IMG_5302.jpg
http://img.photobucket.com/albums/v344/gsracer/The%2014/IMG_5300.jpg
http://img.photobucket.com/albums/v344/gsracer/The%2014/IMG_5299.jpg

[Rusted_PS13]

Factory wheels...:-/

Front: 17x9 +15
Rear: 17x10 +25 (Spaced with 15mm spacers) +10

Tires: 225/45 front
245/45 rear (monster truck tires anyone?)

http://a702.ac-images.myspacecdn.com/images01/48/l_9dd1ded1e33dc01772f75d3e3fe6b07d.jpg

http://a471.ac-images.myspacecdn.com/images01/61/l_7f52d90e259035c398d09024377c677e.jpg

[Matej]

18x9.5 -3 front
18x9.5 -15 rear

Sportmaxes LOL LOL LOL.

http://www.d-zoo.com/personal/images/sx_10.jpg

http://www.d-zoo.com/personal/images/sx_11.jpg

[Matej]

Sorry for the previous pictures, here are some better ones.

http://www.d-zoo.com/personal/images/sx_12.jpg

http://www.d-zoo.com/personal/images/sx_13.jpg

[ALEXTHESUS*PECT]

http://i60.photobucket.com/albums/h10/ale89se/pics117-1.jpg
http://i60.photobucket.com/albums/h10/ale89se/pics116.jpg
http://i60.photobucket.com/albums/h10/ale89se/pics106.jpg

17x9 +14 front
17x10 +12 rear
rolled and pulled fender in rear!

[Koopa Troopa]

http://i21.photobucket.com/albums/b267/koopatroopa187/Sillbeer%20S14/CRW_0812.jpg

[khmerguy618]

Finally i can post in here!

9.5 0 in front -4ish camber
http://i20.photobucket.com/albums/b216/sereitun/kouki%20s14/paint%20and%20pickup/CIMG2866.jpg
http://i20.photobucket.com/albums/b216/sereitun/kouki%20s14/paint%20and%20pickup/CIMG2871.jpg
11 0 rear -4ish camber
http://i20.photobucket.com/albums/b216/sereitun/kouki%20s14/paint%20and%20pickup/CIMG2865.jpg
http://i20.photobucket.com/albums/b216/sereitun/kouki%20s14/paint%20and%20pickup/CIMG2864.jpg

----

rear

11 +13
http://i20.photobucket.com/albums/b216/sereitun/kouki%20s14/CIMG2661.jpg

10 -7 front
11 +13 rear
http://i20.photobucket.com/albums/b216/sereitun/kouki%20s14/IMG_0175.jpg

9.5 0
http://i20.photobucket.com/albums/b216/sereitun/kouki%20s14/CIMG3087.jpg
http://i20.photobucket.com/albums/b216/sereitun/kouki%20s14/CIMG3086.jpg

10 -2 front
http://i20.photobucket.com/albums/b216/sereitun/kouki%20s14/paint%20and%20pickup/CIMG2903.jpg

11 +18 (needs to be a +15 or +13 so it won't rub the coilover though)
http://i20.photobucket.com/albums/b216/sereitun/kouki%20s14/paint%20and%20pickup/CIMG2897.jpg


i thinks thats it for now i'll get my car in better shape and take better pics later.

[JVD]

^^^ Get outta here with that shit ^^^

18 x 10.5 +18 245/40/18 with a baller ass news paper pull

http://img246.imageshack.us/img246/6043/vienna2de3.jpg

I'll get better pics up soon...

[jookybanana]

18x9.5 +12
http://img.photobucket.com/albums/v63/blowass/Jackie%20test%20fit/IMG_2641.jpg
http://img.photobucket.com/albums/v63/blowass/japanese%20show%202007/IMG_2415.jpg

ap1 fitment 18x9 +20
http://img.photobucket.com/albums/v63/blowass/Jackie%20test%20fit/IMG_2607.jpg
http://img.photobucket.com/albums/v63/blowass/Jackie%20test%20fit/IMG_2610.jpg
http://img.photobucket.com/albums/v63/blowass/Jackie%20test%20fit/IMG_2634.jpg

[sLiDewAys]

17x10.5+2 235/45/17
http://f31club.com/uploads/CIMG2315.JPG

[sLiDewAys]

by request.

http://f31club.com/uploads/CIMG2329.JPG

http://f31club.com/uploads/CIMG2338.JPG

17x9+16 215/45/17
17x10.5+2 235/35/17

[thejapino]

Chrome Cobra R replicas
17x9+23
(+6mm spacer for rear)
215/45/17 all around
Got them for super cheap in new condition.
http://i45.photobucket.com/albums/f61/thejapino/S13010.jpg

[sLiDewAys]

old shoes.
17x9+15 235/45/17
17x10+15 245/45/17
4x114.3 Work Meistar 2 Piece

http://f31club.com/uploads/P1010070.JPG
http://f31club.com/uploads/P1010088.JPG

17x9+15 215/45/17
17x10+12 235/45/17
5x114.3 5zigen BANDWAGGONIERS.

http://f31club.com/uploads/m30flick.JPG

more to come.

[fliprayzin240sx]

AME Shallens 18x9 +5mm (225/35) 18x10 -5mm (235/35)
http://img.photobucket.com/albums/v335/JCE10_707/Photoshoot%20June%2014%202007/IMG_1622.jpg
http://img.photobucket.com/albums/v335/JCE10_707/Photoshoot%20June%2014%202007/IMG_1604.jpg
http://img.photobucket.com/albums/v335/JCE10_707/Photoshoot%20June%2014%202007/IMG_1540.jpg

[NI_YON_Zenki]

A classic for yuh all.

http://img.photobucket.com/albums/v201/Busted_lips/rollerfendersME.jpg

(A larger view of my avatar)

I have made no progress. the market has become to expensive/ and yet saturated for my development options at this time.
Not necessarily broke.

Up Front 9 x -7 offset, most if not all here already know this, sadly. cause yet only a few know me.

Where is the Freeway? I've got practice.

[fliprayzin240sx]

hey flip/ did u get those from tony?

Rommates car in the states, was the guy who used to own it from Salinas? If so, guess so. I know it originally was Ard Josh's rims on his Z33, was sold, then got sold again to my roomie.

Work Rezaxx 17x8 +22 w/ 13mm spacers to clear skyline brakes and 17x9 +22 rears

http://i58.photobucket.com/albums/g254/fliprayzin240sx/Zenki%20S14/PA310055.jpg
http://i58.photobucket.com/albums/g254/fliprayzin240sx/Zenki%20S14/PA310053.jpg

Waiting for Grants fender roller so I can roll the fenders and lower it.

[hybrid_eg]

here is a quick one of me, shitty pic i'll get some better ones..

17x9+20 all around +3 spacer in front, (due to HE's) front spindle set all the way to positive. +8 spacer in rear. Front Camber is maxed out to the full and i didn't do the alignment yet. Seems to fit ok so far, have yet to drive it hard and see if anything hits in the front.. (I had 5mm spacer in front before but it was too much out in my opinion so i machined that hubcentric spacer to a a new 3mm hubcentric spacer!

235/40/17 federals all around.
http://img.photobucket.com/albums/v251/hybrid_eg/Picture017.jpg
http://img.photobucket.com/albums/v251/hybrid_eg/nizmo018.jpg

[articdragon192]

Uras NS-01
17*9.5 +15
255/40-17 Azenis
-2.5° up front
-3.0° in the rear
Stock fenders, no pull; no roll
Front:
http://img.photobucket.com/albums/v293/ArticDragon192/My%20Fairlady/CAM_0065.jpg
http://img.photobucket.com/albums/v293/ArticDragon192/My%20Fairlady/CAM_0065.jpg
http://img.photobucket.com/albums/v293/ArticDragon192/My%20Fairlady/CAM_0066.jpg
http://img.photobucket.com/albums/v293/ArticDragon192/My%20Fairlady/CAM_0067.jpg
http://img.photobucket.com/albums/v293/ArticDragon192/My%20Fairlady/CAM_0071.jpg
http://img.photobucket.com/albums/v293/ArticDragon192/My%20Fairlady/CAM_0070.jpg

Rears: I need a pull for sure, lol, the fender was resting on the tire
http://img.photobucket.com/albums/v293/ArticDragon192/My%20Fairlady/CAM_0074.jpg
http://img.photobucket.com/albums/v293/ArticDragon192/My%20Fairlady/CAM_0073.jpg
http://img.photobucket.com/albums/v293/ArticDragon192/My%20Fairlady/CAM_0069.jpg
http://img.photobucket.com/albums/v293/ArticDragon192/My%20Fairlady/CAM_0068.jpg

[yokotas13]

http://farm2.static.flickr.com/1265/620156981_448f69ddc3.jpg
18x10 +7 effective
the lip keeps hitting my fender, i gotta roll it wed...

[swayray]

16x8 et 0 w/ 195/55/16 fits pretty well w/ a minor roll... thanks joe for loaning me your wheels + tires... sorry i left you some dust i picked up from Horse Thief Mile...

http://i108.photobucket.com/albums/n3/swayray/misc/DSCN0641.jpg

http://i108.photobucket.com/albums/n3/swayray/misc/DSCN0642.jpg

http://i108.photobucket.com/albums/n3/swayray/misc/DSCN0640.jpg

[yokotas13]

http://farm2.static.flickr.com/1068/637518563_c270bcc8db.jpg

new fitment
tuckage on the turns

[Zilvia4eva]

just thought I post these up(wheels pending sale)....SSR koenig's aka (WRV) 18x9.5 +1(w/15mm spacer) 18x11 +9 (245/40/18 & 275/35/18)...stock S14 body
http://i155.photobucket.com/albums/s292/s14eva1/177306085253_0_0.jpg
http://i155.photobucket.com/albums/s292/s14eva1/177305779333_0_0.jpg
http://i155.photobucket.com/albums/s292/s14eva1/Mys14-1.jpg

[mehsilvia]

Raze R74
18x8.5 +25 235/40R18
18x9.5 +35 255/40R18

http://i163.photobucket.com/albums/t282/mehsilvia/Wheels/IMG_1820.jpg
http://i163.photobucket.com/albums/t282/mehsilvia/Wheels/IMG_1816.jpg
http://i163.photobucket.com/albums/t282/mehsilvia/Wheels/IMG_1819.jpg
http://i163.photobucket.com/albums/t282/mehsilvia/Wheels/IMG_1818.jpg
http://i163.photobucket.com/albums/t282/mehsilvia/Wheels/IMG_1817.jpg

[fliprayzin240sx]

Work VS-XX 18x8/9 +32mm 225/40 fronts and 245/40 rears (FOR SALE)
http://i58.photobucket.com/albums/g254/fliprayzin240sx/stuff/P6290040.jpg
http://i58.photobucket.com/albums/g254/fliprayzin240sx/stuff/P6290037.jpg
http://i58.photobucket.com/albums/g254/fliprayzin240sx/stuff/P6290036.jpg

Work Equips 18x9/10 +22mm 225/40 Fronts w/ 13mm spacer to clear brakes and 235/40 Rears. Need to lower a bit more once i get ahold of a fender roller.
http://i58.photobucket.com/albums/g254/fliprayzin240sx/P7060057.jpg
http://i58.photobucket.com/albums/g254/fliprayzin240sx/RearEquips.jpg
http://i58.photobucket.com/albums/g254/fliprayzin240sx/Rear2.jpg
http://i58.photobucket.com/albums/g254/fliprayzin240sx/P7060056.jpg
http://i58.photobucket.com/albums/g254/fliprayzin240sx/Highfront.jpg

[Luvs2slide]

Weds Mesh
17 x 8 +20
17 x 9 +20
215/45 front
225/45 rear
Hella pull on the Front and rear to fit
No spacers to clear Z brakes.

Lowered the front about an 1.5 inch more in the front recently. Guess I should post up the pics lol.

http://i76.photobucket.com/albums/j1/luvs2slide/PHOT0008600x450.jpg
http://i76.photobucket.com/albums/j1/luvs2slide/PHOT0004600x450-1.jpg

[yokotas13]

http://farm2.static.flickr.com/1313/807323294_2b83ac8040.jpg
got outta here with your weak fitment!
http://farm2.static.flickr.com/1075/806437757_5fd4eb2479.jpg
http://farm2.static.flickr.com/1123/806436869_0b648e1de3.jpg

/thread hehehe

[Zilvia4eva]

update...

holding on to the wheels for now,pulled fenders and lowered the car.

http://i155.photobucket.com/albums/s292/s14eva1/178626403717_0_0.jpg
http://i155.photobucket.com/albums/s292/s14eva1/178625692677_0_0.jpg
http://i155.photobucket.com/albums/s292/s14eva1/178625515909_0_0.jpg

[hotrodv]

Just fitted rear origin overfender..
http://www.ziptied.com/Coppermine/albums/userpics/11028/f2.jpg
http://www.ziptied.com/Coppermine/albums/userpics/11028/f3.jpg

[khilgers]

18x9.5 +12 all around
235/40/18 RT-615's all around
Dropped 3" on coils
rolled front and rear

unknown camber, getting aligned in a week.

http://www.khilgers.com/forumpics/240/wheelwhore.jpg

[Hooorahh!]

16x8 0 offset
tien he coils
no pull just slight roll
205/50/16
http://i21.photobucket.com/albums/b274/Studgus/two%20thousand%20five%20to%20two%20thousand%20seve n%20june/IMG_8073_edited.jpg
http://i21.photobucket.com/albums/b274/Studgus/two%20thousand%20five%20to%20two%20thousand%20seve n%20june/IMG_8073_edited.jpg
http://i21.photobucket.com/albums/b274/Studgus/two%20thousand%20five%20to%20two%20thousand%20seve n%20june/IMG_8090_edited.jpg

[Zilvia4eva]

man you need some jdm sideskirts and zenki rear valences, imho.

crazy ass wheel offsets!
thanks bro....but I like the koukie sides w/jdm koukie rear bumper + valence.Now time for a greedy lip or a custom fitted 996TT front lip.:drool:

http://a798.ac-images.myspacecdn.com/images01/114/l_2d0afc32fe437833ad7b153dea54546d.jpg
http://a885.ac-images.myspacecdn.com/images01/120/l_1033c6d63bf22b7260291f1552071644.jpg

[swayray]

back to my old wheels again... for now...

17x9 +35 w/ 25 + 3mm spacers... 215/45/17

http://i108.photobucket.com/albums/n3/swayray/wawa/DSCN0051.jpg

http://i108.photobucket.com/albums/n3/swayray/wawa/DSCN0050.jpg

[Masa]

back 'n' da day

18x11(-1) jp scaras, 245/40 dunlop dz101's

http://img.photobucket.com/albums/v406/ikuyasa/PICT0007.jpg
http://img.photobucket.com/albums/v406/ikuyasa/PICT0019.jpg
http://img.photobucket.com/albums/v406/ikuyasa/PICT0020.jpg

[EJ253]

front:
17x8 -6 offset 2* camber
225/45/17 Falken Azenis RT615

rear:
17x9 -3 offset 1.5* camber
225/45/17 Falken Zeix ZE512

http://i19.photobucket.com/albums/b163/imafreeskier/moneymoney.jpg

im going lower soon.
then ill have more camber

[marveluz]

mini-me sizing

16x7.5 +3
f: 205/50/16 fk452
r: 225/50/16 st115

http://i6.photobucket.com/albums/y215/marveluz/IMG_2090.jpg

http://i6.photobucket.com/albums/y215/marveluz/IMG_2175.jpg

[adrians_s13]

ssr sp1 professors
17x8/9 +24
added 10mm spacers all around
http://farm2.static.flickr.com/1220/861627101_6b0540c2cc.jpg
http://farm2.static.flickr.com/1145/861627135_2684b86fec.jpg
http://farm2.static.flickr.com/1377/861627193_ca2e9f9ce0.jpg?v=0
http://farm2.static.flickr.com/1088/861626903_4d43d943ec.jpg?v=0

[luisgonz]

http://i8.photobucket.com/albums/a50/WOLF45SKYLINE/Alex007.jpg
http://i8.photobucket.com/albums/a50/WOLF45SKYLINE/Alex002.jpg

[khilgers]

better pic

18x9.5 +12
235/40/18 all around
stock metal, roll all around

http://www.khilgers.com/forumpics/240/wheelwhore2.jpg

[eds13]

http://xc4.xanga.com/31083a1276048138027223/m101424047.jpg

[1Via!]

If youre going to post pics of your wheels, fuckin post the sizing of the wheels and tires. Its utterly pointless to post in this thread otherwise.

And, my bit.

17x9 +15 (effective offset +5 with S14 FLCA)
Hankook RS2 235/40-17
-3 camber

Rear
18x9.5 +12
Bridgestone SO-3 Pole Position 235/40-18
-1.5 camber

Stock fenders, slight roll in rear.

http://img.photobucket.com/albums/v212/425_1-Via/DSC02274.jpg

http://img.photobucket.com/albums/v212/425_1-Via/DSC02280.jpg

http://img.photobucket.com/albums/v212/425_1-Via/DSC02282.jpg

http://img.photobucket.com/albums/v212/425_1-Via/DSC02293.jpg

http://img.photobucket.com/albums/v212/425_1-Via/DSC02292.jpg

Thanks go to Mr. Logan at Aspec for the wheels.

Thank you for your time.

[eds13]

18x9+5 and 18x10+13 with a some camber (dont know how much) i need a fender roller wicked bad. lol

http://x9d.xanga.com/593d615bd5431138141925/m101522454.jpghttp://xff.xanga.com/3c5d6353d6431138141971/m101522490.jpg

[ThatGuy]

Useless crap deleted. Post pics and specs or don't post.

[silviaguy240]

18x10 +15..completely stock

http://i40.photobucket.com/albums/e210/silviaguy240/fit1.jpg
http://i40.photobucket.com/albums/e210/silviaguy240/fit2.jpg
http://i40.photobucket.com/albums/e210/silviaguy240/fit3.jpg

[Project3328]

chargespeed f 30mm and r 50mm

work equip
f= 18x10 -7 (225/40/18)
r= 18x11 -21 (245/40/18)

If u wanna be a gangsta, but ur on a budget.. hit up Felix @ rb motoring www.rbmotoring.com
http://i3.photobucket.com/albums/y90/ProjectP/patscar057.jpghttp://i3.photobucket.com/albums/y90/ProjectP/patscar061.jpghttp://i3.photobucket.com/albums/y90/ProjectP/ohhyea.jpg

[kiki-rs13]

Front: 9x17 ET12 with 225/45 17

Rear: 9,5x18 ET20 with 235/40 18

Some Pictures ;)
http://aycu15.webshots.com/image/22454/2003757566435936440_rs.jpg (http://allyoucanupload.webshots.com/v/2003757566435936440)

http://aycu13.webshots.com/image/23652/2003734195298491724_rs.jpg (http://allyoucanupload.webshots.com/v/2003734195298491724)

http://aycu11.webshots.com/image/24690/2003713766083106269_rs.jpg (http://allyoucanupload.webshots.com/v/2003713766083106269)

http://aycu02.webshots.com/image/25521/2003759093929769337_rs.jpg (http://allyoucanupload.webshots.com/v/2003759093929769337)

http://aycu24.webshots.com/image/21343/2003257526973184528_rs.jpg (http://allyoucanupload.webshots.com/v/2003257526973184528)

http://aycu29.webshots.com/image/23108/2003263118360014348_rs.jpg (http://allyoucanupload.webshots.com/v/2003263118360014348)

http://aycu05.webshots.com/image/22884/2003269170091878742_rs.jpg (http://allyoucanupload.webshots.com/v/2003269170091878742)

[mechanikid]

http://i4.photobucket.com/albums/y134/mechanikid1701/DSC00841.jpg
http://i4.photobucket.com/albums/y134/mechanikid1701/DSC00839.jpg

17x8+12
17x9+20
255/40/17 advan neova all around
(+15mm spacers used)

[usdm180sx]

Work Equips 17x9 +15 (High disk, clears z32 brakes) 215/45-17 and 17x10 +18 (Low disk,phattest lip) 235/40-17
http://i97.photobucket.com/albums/l232/usdmsilvia/WorkEquips006.jpg
http://i97.photobucket.com/albums/l232/usdmsilvia/WorkEquips005.jpg
http://i97.photobucket.com/albums/l232/usdmsilvia/WorkEquips004-1.jpg
http://i97.photobucket.com/albums/l232/usdmsilvia/WorkEquips003.jpg
http://i97.photobucket.com/albums/l232/usdmsilvia/WorkEquips002-1.jpg
http://i97.photobucket.com/albums/l232/usdmsilvia/WorkEquips001-1.jpg

[Flybert]

Cheya boiii! Work Equpis 17x9 +15 (High disk, clears z32 brakes) 215/45-17 and 17x10 +18 (Low disk,phattest lip) 235/40-17

Who refinished your lips? It looks like they grinded down the taper on them? And work never made those sizes. Closest you can get to that is 17x9 +18 high disk (58mm lips) and 17x10 +22 standard disk (70mm lips). Work never made a low disk for the 17" wheels. The only way you can make a 17x10 +18 is with a high disk and 70mm lips.

Still looks great BTW. I have 17x9 +18 high disk FRONT 235/40/17 595 but I have 17x10 +35 standard disk REAR 245/40/17 595. Still has good lip but I want more. My friend on the right has 17x8 +22 front standard disk 215/45/17 595 and 17x9 +22 rear standard disk 215/45/17 595. Same front and rear lips as mine.

http://i33.photobucket.com/albums/d56/pandapandared/IMG_0387-1.jpg
http://i33.photobucket.com/albums/d56/pandapandared/IMG_0389.jpg
http://i33.photobucket.com/albums/d56/pandapandared/IMG_0388.jpg
http://i33.photobucket.com/albums/d56/pandapandared/IMG_0353.jpg
http://i33.photobucket.com/albums/d56/pandapandared/IMG_0352.jpg
http://i33.photobucket.com/albums/d56/pandapandared/photoclass240.jpg
http://i33.photobucket.com/albums/d56/pandapandared/photoclass244.jpg

[usdm180sx]

Thanks! I picked them up from RB Motoring. Heads up, they have such a big inventory of work barrels that they can now make Equips to order. I asked them if they could make 17x9 +15ish and 17x10 +20ish and this is what they came up with. I got them for $1500 repainted and refinished.

[genetic]

sweeet equips norm

heres mine

http://img.photobucket.com/albums/v359/geneticdr1ft/-5-10.jpg

17x9-5,17x9-10

[abdul1]

Custom made HRE wheels C21

front 18x9 ET18 235/40/18

rear 18x10.5 ET17 275/35/18

[abdul1]

http://i162.photobucket.com/albums/t262/bigwheels-sa/15082007862.jpg

http://i162.photobucket.com/albums/t262/bigwheels-sa/15082007863.jpg

http://i162.photobucket.com/albums/t262/bigwheels-sa/15082007864.jpg

http://i162.photobucket.com/albums/t262/bigwheels-sa/15082007877.jpg

http://i162.photobucket.com/albums/t262/bigwheels-sa/15082007873.jpg

http://i162.photobucket.com/albums/t262/bigwheels-sa/15082007875.jpg


http://i162.photobucket.com/albums/t262/bigwheels-sa/15082007872.jpg

http://i162.photobucket.com/albums/t262/bigwheels-sa/15082007867.jpg


http://i162.photobucket.com/albums/t262/bigwheels-sa/15082007864.jpg


Custom made HRE wheels C21

front 18x9 ET18 235/40/18

rear 18x10.5 ET17 275/35/18


:wavey:

[AutoRnD]

S14 Kouki - Daily Driver (Client of ours)

Standard FENDER ROLL, NO PULL

Origin
Stance Sport: 25 1/8" Ground to Center of Fender
-2.5 Front -2.0 Rear, 0 Toe

Meister S1 3 Piece BBF Finish
19x9.5 +12 235/35/19
19x10.5 +23 265/30/19
NO RUBS!!!!!!!

http://www.autornd.com/catalog/albums/Actual%20Product%20Pictures/Customer_Cars/NISSAN/S14-240Sx-95-98/Meister-S1-3pc-1995-12-19105-23-514-240sx-oncar-tn/Meister-S1-3pc-1995-12-19105-23-514-240sx_14.jpg

http://www.autornd.com/catalog/albums/Actual%20Product%20Pictures/Customer_Cars/NISSAN/S14-240Sx-95-98/Meister-S1-3pc-1995-12-19105-23-514-240sx-oncar-tn/Meister-S1-3pc-1995-12-19105-23-514-240sx_2.jpg

http://www.autornd.com/catalog/albums/Actual%20Product%20Pictures/Customer_Cars/NISSAN/S14-240Sx-95-98/Meister-S1-3pc-1995-12-19105-23-514-240sx-oncar-tn/Meister-S1-3pc-1995-12-19105-23-514-240sx_3.jpg

Rishie

[JSpecBnr32]

30mm front fenders, 50mm rears
F=18x10 -8, +12(with 20mm spacer) 215/40/18
R=18x12 -7 255/35/18
http://i160.photobucket.com/albums/t191/Jspecbnr32/DSC04873.jpg
http://i160.photobucket.com/albums/t191/Jspecbnr32/DSC04876.jpg
http://i160.photobucket.com/albums/t191/Jspecbnr32/DSC04877.jpg

[Slip&Sliden 240]

30mm front fenders, 50mm rears
F=18x10 -8, +12(with 20mm spacer) 215/40/18
R=18x12 -7 255/35/18

wouldn't that make the front wheels a 18x10 -28 since the 20mm spacer is moving the wheel out?

[jeeper_x]

wouldn't that make the front wheels a 18x10 -28 since the 20mm spacer is moving the wheel out?

it's normally +12, so 20mm spacer will make it -8.....:hsdance:

[usdm180sx]

18x10 +12 w/ 20mm spacer makes the offset -8. You fail at math haha

[240sxdriftin]

well i've not posted yet much on this forum, but i just got new wheels so i will share!

advan racing oni's 16x8 with a 0 offset tires are 205/45/16
and my old wheels up front 15x6 with a 10 offset tires a 205/50/15
http://i7.photobucket.com/albums/y264/onecrew300zx/S4020844.jpg
http://i7.photobucket.com/albums/y264/onecrew300zx/S4020845.jpg
http://i7.photobucket.com/albums/y264/onecrew300zx/S4020846.jpg
http://i7.photobucket.com/albums/y264/onecrew300zx/S4020847-1.jpg
http://i7.photobucket.com/albums/y264/onecrew300zx/S4020849.jpg
http://i7.photobucket.com/albums/y264/onecrew300zx/S4020850.jpg

[jimmytango00]

18x9 +9 and 18x10+5
http://img.photobucket.com/albums/v218/sergis/frontshot2.jpg (http://www.zilvia.net/f/%5BIMG%5Dhttp://img.photobucket.com/albums/v218/sergis/frontshot2.jpg%5B/IMG%5D)http://img.photobucket.com/albums/v218/sergis/frontshot1.jpg (http://www.zilvia.net/f/%5BIMG%5Dhttp://img.photobucket.com/albums/v218/sergis/frontshot1.jpg%5B/IMG%5D)

[Slip&Sliden 240]

18x10 +12 w/ 20mm spacer makes the offset +12. You fail at math haha

You fail at common sense. Mathmatically -8+20=12, but when you take off set calculations into perspective if a wheel has a offset of +12mm and you space the wheel out 20mm then you are moving the center of the wheel 20mm farther from the hub. Which would make that a -20mm so (+12) + (-20)= -8.

My first post i missread. I thought the wheels were a -8 with a 20mm spacer, not +12 with a 20mm spacer. But if it was -8 with a 20mm spacer then it would be (-8) + (-20) = -28

[FaLKoN240]

You fail at common sense. Mathmatically -8+20=12, but when you take off set calculations into perspective if a wheel has a offset of +12mm and you space the wheel out 20mm then you are moving the center of the wheel 20mm farther from the hub. Which would make that a -20mm so (+12) + (-20)= -8.

My first post i missread. I thought the wheels were a -8 with a 20mm spacer, not +12 with a 20mm spacer. But if it was -8 with a 20mm spacer then it would be (-8) + (-20) = -28

The wheels are spaced effectively to -8 because the offset was originally +12.

12 - 20 = -8

[Slip&Sliden 240]

The wheels are spaced effectively to -8 because the offset was originally +12.

12 - 20 = -8

I understand that. Read my post I said that I read it wrong, I said it was -8. I cleary stated how I thought he was saying they where +12 after the spacer, and I corected my self.

[usdm180sx]

Haha I typed in +12 but I meant to type in -8. In any case I replied to your post because it was incorrect. So I guess I fail at typing? And so do you.

[JSpecBnr32]

u guys are silly

[usdm180sx]

My first post i missread.

You fail at reading? haha j/k

[YucA]

needs some fine tuning, but yea...

http://pics.shorty.org/files/12/regamaster/regasOn1.jpg

17x9+18
17x10+20

alignment all outta wack. Need to take off some camber in the rear and maybe add a bit more in the front, aswell as adjusting toe...

[xcusememisswyn]

http://i43.photobucket.com/albums/e373/xcusememisswyn/IMG_8416.jpg
17x8J +30 Mustang Cobra Wheels.
31mm spacer in the rear, 25mm spacer up front.
Fenders are rolled, and a newspaper pull in the rear.
Need less rubber to go lower.

[kevtrinh]

http://a512.ac-images.myspacecdn.com/images01/77/l_e6e82a0cc2ee880032b63f46030fa35f.jpg
Front 17x9 +35 with 25 Spacer (+10mm) Fenders are pretty thin (-1.1 camber...strange but thats what the computer says)
Rear 17x9 +17 (rolled fenders) -2.5 Camber

[Bushido]

http://farm2.static.flickr.com/1366/1308254786_709d564239_o.jpg
http://farm2.static.flickr.com/1123/1308256696_91c59208b1_o.jpg
http://farm2.static.flickr.com/1051/1307329607_71bf2899e4_o.jpg

...doesn't look like it in the pictures, but you can't get your finger between the tire and fender

18x9.5 +15 4 LUGZZZZZZZZ

225/40/18 Fed SS595

all around.

[shane_lxi]

Not too crazy. Prolly in need of about a 20mm spacer or so, but it'll get the job done until 5 lug, way later on.

http://i67.photobucket.com/albums/h315/shane_lxi/fitment4.jpg

http://i67.photobucket.com/albums/h315/shane_lxi/fitment2.jpg

http://i67.photobucket.com/albums/h315/shane_lxi/fitment5.jpg
18x8 +20 fronts, 18x9 +20 rears. 215 40 18 feds front and rear.

[smelly240]

bushido - are those rotas or m2hanbai or what? --\\

shane - what are those? --\\

[implayaz9]

rota's and axis

[turtle m3th]

rota's and axis

I think your wrong about the rota's, I think they are uras wheels.

[oneviaman]

nope they are the rotas. i put that shit together. damn 18s.

[smelly240]

buuuurned... you should know im never wrong :P

[turtle m3th]

haha, damn! I didn't know that rota actually made something worth buying =) Forgiviness prease! haha.

[smelly240]

;) - they're still weak metal, but they're great looking wheels if ur tight on money. rotas are usually light (esp compared to like a sportmax or somethin)

[hotrodv]

http://img205.imageshack.us/img205/6885/01sb4.jpg

[Bushido]

finally got the overs on? are they the box flare type like the s13 ones you got by accident?
lookin good, massimo!

http://farm2.static.flickr.com/1341/1323425502_aea4e8a777_o.jpg


18x9.5 +15 225/40/18 Federal SS595

[Kuzumi]

please post specs with your pictures so others can learn. :rolleyes:

[a_ahmed]

ill post up more pics when the car is finished and when the I lower the coilovers more.

19x10.5 -8
265/35/19
new fender is approximately 3" wider than stock.
don't know the camber.
http://i85.photobucket.com/albums/k76/moog177/Bluebeard/DSC00025.jpg


Any updates on that hoe, looks hot

[s14gj]

BUSHIDO where did you buy your rota wheels?
and are thay a +20 offset with a 5mm spacer?

[ayuaddict]

the rota P45Rs also come in 18x9.5 +12 iirc. so that would save money as opposed to buying +20/5mm spacer...

[d*star180]

Yah but i think they only come in +12 for 5 luggers.
Might be wrong. Think the best they have for 4 lug is 18x9.5 +25.

[s14gj]

where is a god place to buy rota wheels at?
what do a 18x9.5 with a +12 or +15 cost $$$$$$4?

[smelly240]

900-ish for a set of 4.

[Full-Lock]

never thought id say this but

those rotas actually look good on that car

[gogg]

Bushido, how did you get those rims 4 lug at +15 offset? Their website doesnt even list that size.

[Full-Lock]

spacers man

spacers

[BOROSUN]

that rota was a special size gb. so, no spacers

[Bushido]

http://farm2.static.flickr.com/1256/1333684974_624e21195a_o.jpg

18x9.5 +15. 4x114.3. no spacer.
one of 5 sets made with these specs.
P45R's arent made in 4 lug or +15 unless custom ordered.

edit: set up a group buy with the distributor, if you want a set of these wheels PM me for details.

[drift_ricer]

http://i234.photobucket.com/albums/ee219/sidewaymn/workrim.jpg

Front Work Equip 18X10 -5 inch offset 225/40/18 with -30mm fender and 10mm spacer
Rear 18x12 -5 1/2 offset 275/35/18 with -50mm fender and Another JDM flare on it.
:hsdance:

[na3j nitsuj]

^^^want to see more pics!!!whole car too please....

[driftenthusiast]

This was my track setup(as far as alignment). I could have run tons on neg camber to fit but them i would need to get a new alignment before each track day so i put flares on instead.

http://l3it3r.com/2007/may12/jim3phantomshoe.jpg

Work Equip 18x11 -16 offset, no spacer, Falken Azenis 255/40/18(too big). 50mm Bmagic widebody with Z fender flares.

[axiomatik]

never thought id say this but

those rotas actually look good on that car

that's because they are a knockoff of Nismo LMGT4's.

and for those who are looking for them, there's a groupbuy vendor here on zilvia called subydude or something like that. all he does is sell rotas.

[P_TAN]

18x10 +18 with a 234/40R18 Rear -3
18x9 +8 with a 225/40R18 front -2.5
http://i191.photobucket.com/albums/z133/STRD-Pat/Picture050.jpg
http://i191.photobucket.com/albums/z133/STRD-Pat/Picture065.jpg

[driftsilvias13]

put on my wheel from my Z just for fun. WORK Meister S1 3pc 19x11+17 w/275/35 :D looks sick as hell
http://img379.imageshack.us/img379/9513/cimg3651gh3.jpg

[BLKS13]

Dear Kevin,


Since it's a wheel thread anyways, it wouldn't kill you or anyone for that matter to answer a simple question. Pull what ever is in your ass out and cool it.

Forums are for knowledge, not bitching and wining..


-Fernando

[S13SilviaGirl]

So Kevin put them on the car...he was tired of seeing them collect dust on our back porch...

He wished he'd used a fender roller. Shit looks like the surface of Mars now. :keke:


http://img72.imageshack.us/img72/3460/3014vz0.jpg

http://img300.imageshack.us/img300/6927/3015eu5.jpg

http://img530.imageshack.us/img530/3172/3020ai4.jpg


In case you don't know, SSR Vienna Courage 18x9.5 +5 / 18x11 -1

Pics of Yorkie in wheel lip to come tomorrow.

Now we need to slam it... Enjoy!

[teamsprock]

,I got lucky and someone ended up not going through on the 4 lug +15 P45R's so I picked them up and threw them on today. Guess they had these in stock a while since the 5th person fell through, luckily I thought I would try and see if they had any in stock and got these ones. Here's a few pictures and the specs.

S14
18x9.5 +15 Rota P45R
Falken 615 245/40/18 front and back
Rear rolled front
20mm front wide fenders (supposed to be but look about 5mm wider)
Camber: 1.5 in rear and 2.5 in front

http://i45.photobucket.com/albums/f59/TS4l/Car7.jpg

http://i45.photobucket.com/albums/f59/TS4l/Car8.jpg

http://i45.photobucket.com/albums/f59/TS4l/Car2.jpg

http://i45.photobucket.com/albums/f59/TS4l/Car3.jpg

http://i45.photobucket.com/albums/f59/TS4l/Car4.jpg

http://i45.photobucket.com/albums/f59/TS4l/Car1.jpg

[FR=smiles]

Now we need to slam it... Enjoy!



:ghey:

you NEED a kit...and a not sil80..and yes, much lower. But then again, you are a woman, so your idea of "slammed" would be like your idea of "good driving"

[OptionZero]

^what the...^

[articdragon192]

Umm, unless you know the history on that car, you shouldn't be talking. That's Meph's car. Not hers. Her car is way cooler, lol. BTW, learn to repect women you deserve it.

[mrmephistopheles]

:ghey:

you NEED a kit...and a not sil80..and yes, much lower. But then again, you are a woman, so your idea of "slammed" would be like your idea of "good driving"

You're not the brightest crayon in the box, are you?

I mean, misogyny aside, did you REALLY think it was a bright move to pick on the wife of an admin? Specifically *THIS* admin?

Don't know what high horse you're riding on, but I'm here to knock you right off of it.

You don't know shit.

You don't know shit about my car (and why it is the way it is).

You don't know shit about my wife (and how much more awesome she is than you).

I'm not banning you or anything. I'm a bigger man than that. I won't tolerate baseless shit-talking though.

[S13SilviaGirl]

:ghey:

you NEED a kit...and a not sil80..and yes, much lower. But then again, you are a woman, so your idea of "slammed" would be like your idea of "good driving"


Oh wow, you soo want to be banned don't you? It had a kit, it was wrecked while actually driving. As far as slammed, stop talking out of your ass. Those wheels are fucking huge. And because I am a woman how does that make it any different? A good drive to me is better than your best attempt at getting off the freeway exit that has a slight turn to it.

Umm, unless you know the history on that car, you shouldn't be talking. That's Meph's car. Not hers. Her car is way cooler, lol. BTW, learn to repect women you deserve it.

Actually, it IS my car by SOFA status. :keke: but I let him think it is his.

[bigOdom1]

omg the ultimate neg rep hit this guy like a mack truck

[eastcoastS14]

hahahahaahahaha thats the funniest shit ive seen all day....repped back to the stonage lol.... so awsome from 0rep to like negative 50....lol wrong woman to fuck with apparently and also what happens when you start shit with a married couple with 3000+ rep power combined


so FR=smiles lets see some pics of your ride since your so quick to talk shit

[smelly240]

is that an ikeya formula bumper? very not every day around here (phila)

[powersteeringless180sx]

yup it's ikeya. had it for a while now.

[a_ahmed]

I am always curious why is it these front bumpers always look misaligned/garbled/not straight/weirdly reflective/distorted...

Is it because it's fiberglass? How does one go about making it look shiny/straight/proprely reflective/etc...

I don't know it reminds me of those honda civics from back in the day :-/ Not trying to insult your bodykit/car, it looks neat honestly but yeah :(

[ayuaddict]

you can block it and fill the low points and block it some more, and keep repeating, but i really dont think its worth it, considering how low most decent 240s are.

[TheSquidd]

I don''t even paint my front bumpers.

[Frosty_spl]

GRR, i tried to roll my rear fenders, and one of them got a small crease, just enough not to allow me to get my rears superflush. I also need to lower it a bit.
18x9.5+12 with 225 40 18

http://www.clintk.net/240/IMG_4829.jpg
http://www.clintk.net/240/IMG_4834.jpg
http://www.clintk.net/240/IMG_4843.jpg
http://www.clintk.net/240/IMG_4851.jpg

blegh, i need aero.

[RUTH'LESSDET]

thanks bro....but I like the koukie sides w/jdm koukie rear bumper + valence.Now time for a greedy lip or a custom fitted 996TT front lip.:drool:

http://a798.ac-images.myspacecdn.com/images01/114/l_2d0afc32fe437833ad7b153dea54546d.jpg
http://a885.ac-images.myspacecdn.com/images01/120/l_1033c6d63bf22b7260291f1552071644.jpg

this so sick:eek2:

[jookybanana]

^i see you kept the orange sticker on, i did that too until it got wet and came off

18x9.5 +12 225/35/18 and 225/40/18
http://img.photobucket.com/albums/v63/blowass/car%20stuff/IMG_4026a.jpg
http://img.photobucket.com/albums/v63/blowass/car%20stuff/IMG_4272a.jpg
http://img.photobucket.com/albums/v63/blowass/car%20stuff/IMG_4017a.jpg

[Frosty_spl]

I bit your wheels dog. lolz.

[Tops*]

That's my bad.

[ThatGuy]

He's not a Japanese Man. He just happens to be living in Japan.

He is a Former US Marine. She's a current US Sailor.

He is an Administrator. She is a Moderator.

They are my Brother and Sister-in-law. They can both drive. They deserve respect for being good people.


Let's let this go now. FR=Smiles will never recover form the Red Squares set upon him by his stupidity. Get this Thread back on the Topic of Wheel Fitment. :bow:

[yokotas13]

heh
i love when my rear pokes out kekeke
http://farm2.static.flickr.com/1424/1405783574_df4f8faf86.jpg

[smelly240]

if you dont bring that car back with you im gonna hunt you down so i can karate you...

thing's sweet - and i uh... dont know any karate. but still, you better

[FaLKoN240]

Wow...did you really just type that? Messing with a Japanese man's girl is one, (trust me, I know, cause I'm Japanese and don't take shit from anyone when it comes to my girl), but to mess around with a Japanese man's wife...mmm, you're gonna get ripped a new one, that's fo sho. How the hell can you say women can't drive? That's fucked up...

I'm pretty sure that Kevin isn't Japanese.

[ThatGuy]

I believe I said:
Get this Thread back on the Topic of Wheel Fitment.

[DoriftoSlut]

Nismo rims for the Mazda. Now with proper engine (brap brap brap brap braaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaap).


http://img.photobucket.com/albums/v238/Pink_GodziRa/FC3S/DSC00308.jpg

http://img.photobucket.com/albums/v238/Pink_GodziRa/FC3S/DSC00309.jpg

http://img.photobucket.com/albums/v238/Pink_GodziRa/FC3S/DSC00310.jpg

http://img.photobucket.com/albums/v238/Pink_GodziRa/FC3S/DSC00311.jpg

[Syncmaster]

This is my long... project...

180sx Sileighty 3.5L ... Pickup soon...

Give me a chance... I dont have arms camber, need more drop, and need widebody...so


http://membres.lycos.fr/bknight007/Widewheel.JPG

[ThatGuy]

This is nothing more than a duplicate post of what you put in the Picture Thread. At least put your wheel specs if you're going to whore out your pictures.

[Full-Lock]

syncmaster: are those the ones from Takumi project awhile back??

those look like the ones that were for sale from driftfactory.com.

[DoriftoSlut]

Drift Factory!! Yeah they were gonna run those on their "drift car" but i guess it finally got to them that you can't do anything with them. THat and the fact that their car will never run. Ever.



*DRIFT FACTORY edit: Seems like they sold that car. HAHAHAHAHAHAHAHAHAHAHA. WTF. But but but... that was supposed to be the best drift car around I thought. Heh.





Okay! More wheel fitment.


http://a376.ac-images.myspacecdn.com/images01/127/l_0b3fca6d190a16f606b93785269b1f3f.jpg

Squiddy says:
18x9 -15
19x10 -33
BN Blister 50mm rear fenders
Origin 25mm front fenders
8 degrees of camber Front
9 degrees of camber Rear

[Bushido]

raised the rear a few mm's.
http://www.ziptied.com/Coppermine/albums/userpics/10269/rear-fitment.jpg

It was a little too low and flush before. So the fender lips would scrape the shit out of the wheel lips during compression..

http://farm2.static.flickr.com/1108/1434364993_1e744e1c74_o.jpg

$900 Rotas means I don't give a fuck. haha

specs are 18x9.5 +15 225/40 x4

[NiSmo240luvR]

raised the rear a few mm's.

It was a little too low and flush before. So the fender lips would scrape the shit out of the wheel lips during compression..

$900 Rotas means I don't give a fuck. haha

specs are 18x9.5 +15 225/40 x4

if you dont give a fuck, why not just leave it? it looked good like that.

ps-im not trying to be a dick. i was just wondering...but it still looks very nice.

[Ian]

because it was probably a serious problem that could cause catastrophic mechanical failure?

[KiDyNomiTe]

I dont think I posted my setup in here.

http://img.photobucket.com/albums/v293/kidynomite/simba0012.jpg
http://www.driftlive.com/photos/driftlive_gallery/midwestcup_07_rd6/dd19_035.jpg
http://www.driftlive.com/photos/driftlive_gallery/midwestcup_07_rd6/dd19_046.jpg

18x10 +10 225/40
18x11 -3 255/35

F: 3.9* Camber
R: 2.8* Camber

Origin 20mm front fenders, Origin 50mm Type 2 rear fenders

Need to replace my frozen RUCAs and lower my rear camber, probably bump up the tire size as well.

[ramblux]

front: 18x9.5 +15 with 25mm spacer (-5 effective offset) under 20mm fenders
rear: 18x10.5 -15 under 30mm overfenders

http://img.photobucket.com/albums/v217/ramblux/s14fs02.jpg

[bloodangels13]

mounted my falkens on my new advans and stuck em on the car
rim specs:
fr 18x 8.5 +35 w/ 20mm spacer 20mm widefenders
R 18x 9.5 +22 no spacer 30mm wide Qtr panels
tires: falken azenis rt615
fr 255/40/18
R 275/40/18
http://i69.photobucket.com/albums/i47/vwyand85/newwheelsetup005.jpg
http://i69.photobucket.com/albums/i47/vwyand85/newwheelsetup001.jpg

[fliprayzin240sx]

Took a couple shots of the car with my new camera, figured ill post it up.
Work Equips 18x9/10 +22 all around w/ 13mm spacer up front to clear GTR brakes and 8mm in the rear to push it out more.

http://www.pxracing.com/modules/coppermine/albums/userpics/10017/normal_IMG_3255.JPG

http://www.pxracing.com/modules/coppermine/albums/userpics/10017/normal_IMG_3249.JPG

http://www.pxracing.com/modules/coppermine/albums/userpics/10017/normal_IMG_3294.JPG

http://www.pxracing.com/modules/coppermine/albums/userpics/10017/normal_IMG_3290.JPG

And yes thats as low as it can go, Cuscos are maxed out to the bottom.

[EDacIouSX]

18x10 +10. Fender pulled.
http://i31.photobucket.com/albums/c390/edaciousx/S5000849.jpg
http://i31.photobucket.com/albums/c390/edaciousx/S5000851.jpg

[a_ahmed]

mounted my falkens on my new advans and stuck em on the car
rim specs:
fr 18x 8.5 +35 w/ 20mm spacer 20mm widefenders
R 18x 9.5 +22 no spacer 30mm wide Qtr panels
tires: falken azenis rt615
fr 255/40/18
R 275/40/18
http://i69.photobucket.com/albums/i47/vwyand85/newwheelsetup005.jpg
http://i69.photobucket.com/albums/i47/vwyand85/newwheelsetup001.jpg

That's a very nice setup

How is it towards you?

More pictures please?

[dorkidori_s13]

Sportmax 006 Gunmetal 17x9/18x9.5 +35 with 15mm TCSportline spacers (knocked out the studs) and NISMO 60mm wheel studs...flat roll in back and light roll infront...slight pull in rear with camber (dunno exact deg)...full camber in front

http://a272.ac-images.myspacecdn.com/images01/110/l_aa8dddbde28d90dff507f050dcd10e47.jpg

[top_mount]

this is my pile of shit, 18x9.5 -7 18x11 -6. i havent put on the fender flares yet.
http://i14.photobucket.com/albums/a328/ONCE_cam/So_Chem/100_0749_00.jpg

[UfoZ8myCow]

Yo neccesito pics of a stock fendered (but rolled/pulled) S13 with 17x9 0s all around... Anyone? I went through 10 pages of pics but didnt see any... :(

[Bushido]

i dont have any pics offhand of 17x9+0 but heres one of 17x8+6
http://img.photobucket.com/albums/v471/Nebuchernezzer/180sx/P9170252.jpg
0's are going to poke another 19mm. pretty ballsy fitment, can't pull the front fenders that much...better break out the hammer and go to town

[yokotas13]

18x9-5

http://farm1.static.flickr.com/125/362391657_bd4de5e33c_o.jpg

[FusionR240sx]

i guess i havn't posted my old setup in here yet huh?
weird... thought i did

17x9+15 225/45
17x10+12 255/45
idk the camber... w/e it is with stance coilovers slammed with everything else being stock

http://i81.photobucket.com/albums/j220/FusionR300zx/240sx/DSC01550.jpg
http://i81.photobucket.com/albums/j220/FusionR300zx/240sx/DSC01549.jpg
http://i81.photobucket.com/albums/j220/FusionR300zx/240sx/DSC01548.jpg

[yokotas13]

^Do you know what kind of camber he is running/tire size? That's definitely the kind of fitment I'm squawking about.

yeah
front completely maxed out camber
225/40/18s on a 18x9j

[jookybanana]

Advan RG 17x9.5 +11 215/40/17, hope to get the rears on, will be 17x9.5 +11 and some 235/40/17

http://img.photobucket.com/albums/v63/blowass/car%20stuff/IMG_4542a.jpg
http://img.photobucket.com/albums/v63/blowass/car%20stuff/IMG_4541a.jpg

[clutch kick drifter]

ssr Vienna 18x9 +24 (F) (5mm spacer) and 18x9.5 +18 (R) with a 215 45 18 all around. Would like to move to 215 35 front and 215 40 rear to go lower.
http://photos-369.ll.facebook.com/photos-ll-sf2p/v142/80/99/503587369/n503587369_124105_2424.jpg
http://photos-369.ll.facebook.com/photos-ll-sf2p/v142/80/99/503587369/n503587369_124104_2199.jpg
http://photos-369.ll.facebook.com/photos-ll-sf2p/v142/80/99/503587369/n503587369_124107_1941.jpg
keep the negative rep to yourself about my stickers btw. If i didnt like them i wouldent put them on there so as far as other peoples oponion on them... fuck um.

[jookybanana]

Get some better pics of the stretch! What will happen to the TEs?

i'm keeping the TE's for sure, i love them, same with RG's
i'm selling my 4lug rims if anyone wants them

here is one of the stretch, i think its too stretched, i'm going to go 225 or 235 next
http://img.photobucket.com/albums/v63/blowass/car%20stuff/IMG_4530a.jpg

[powersteeringless180sx]

front 17x8 +5 w/ 25mm spacer rear 18x9.5 +12 w/ 5mm spacer

http://img222.imageshack.us/img222/1768/img0927nh1.jpg
Shot with Canon PowerShot SD10 (http://profile.imageshack.us/camerabuy.php?model=Canon+PowerShot+SD10&make=Canon) at 2007-10-07

[powersteeringless180sx]

17x9+22 w/ 30mm spacer before I put on the 25mm TE's upfront

http://img221.imageshack.us/img221/8943/img0919ox6.jpg

[RYAN_S-14]

set of R34 GTR RIMS 18x9 +30 5x114.3

no rolling no pulling 245 rear 225 front

camber -3 in rear, 0 in front

http://www.sr20forum.com/gallery/data/500/medium/Picture_0017.jpg

[Bushido]

ugly bumper SPL
http://farm3.static.flickr.com/2120/1534577868_810ba979d8_o.jpg
http://farm3.static.flickr.com/2337/1533710705_3880465b61_o.jpg
http://farm3.static.flickr.com/2155/1534579748_4251515163_o.jpg
http://farm3.static.flickr.com/2060/1534581692_5e4041e128_o.jpg
http://farm3.static.flickr.com/2149/1534580564_947734165e_o.jpg
18x9.5 +15 4x114.3 Rota P45R. 225/40/18 Federal SS595.
Part Shop Max Coilovers (10/8kg)
Daily driven

[5t341tH]

r33 gtr 17x9+30 235/45
no spacers
JIC coils maxed out
roll no pull with unknown camber
http://img223.imageshack.us/img223/6503/spma0016ec2.jpg

[Hooorahh!]

18x9 + 7 w/15mm spacer .. n 225/40/18
18x10 -3 w/25mm spacer .. n 235/40/18
om tien He coilovers front camber'd max it could ...
(pix installing the kit)

http://i21.photobucket.com/albums/b274/Studgus/two%20thousand%20five%20to%20two%20thousand%20seve n%20june/IMG_0359.jpg

http://i21.photobucket.com/albums/b274/Studgus/two%20thousand%20five%20to%20two%20thousand%20seve n%20june/IMG_0357.jpg

http://i21.photobucket.com/albums/b274/Studgus/two%20thousand%20five%20to%20two%20thousand%20seve n%20june/IMG_0349.jpg

http://i21.photobucket.com/albums/b274/Studgus/two%20thousand%20five%20to%20two%20thousand%20seve n%20june/IMG_0350.jpg

http://i21.photobucket.com/albums/b274/Studgus/two%20thousand%20five%20to%20two%20thousand%20seve n%20june/IMG_0348.jpg

http://i21.photobucket.com/albums/b274/Studgus/two%20thousand%20five%20to%20two%20thousand%20seve n%20june/IMG_0336.jpg

[EJ253]

http://i19.photobucket.com/albums/b163/imafreeskier/IMG_0409.jpg

http://i19.photobucket.com/albums/b163/imafreeskier/IMG_0407.jpg

http://i19.photobucket.com/albums/b163/imafreeskier/IMG_0405.jpg

rear:
17x9" ET -3
225/45
7* camber

the front isnt done yet

[95KA-Turbo]

Work VS-Edition

17X8 +5 and 17X9 +3 (including the 15mm spacer I'm running).

215/40/17s up front with 235/45/17s in the back.

15mm spacers for the front are on the way, I'll post pictures when I get those on. I also ideally want to run a 215/45 and 235/40 tire, but I basically got all my tires for free so I don't care.

Very very mild pull in the back, nothing done to the front - I am hoping w/ the 15mm I still wont have to do anything, the tire is REALLY small, so it should clear.

Camber is completely maxed out on the front, and rear is just how it is when JIC FLA-2s are 1/8 an inch away from being maxed out, no camber arms in the back yet. No alignment yet either, I can post actual camber when I do, probably close to -3 when compared to my friends race car.

http://i25.photobucket.com/albums/c51/95KA-Turbo/KoukiWheels8.jpg

http://i25.photobucket.com/albums/c51/95KA-Turbo/KoukiWheels7.jpg

http://i25.photobucket.com/albums/c51/95KA-Turbo/KoukiWheels9.jpg

http://i25.photobucket.com/albums/c51/95KA-Turbo/KoukiWheels5.jpg

[oneviaman]

17x9 +24 w/20mm spacer so +4 215/40/17
17x10.5 +27 w/25mm spacer so +2 234/40/17
china mustang wheels
dont worry bout the tag as for this car is kept in storage after fuckers broke in and stole all my electronics
http://i104.photobucket.com/albums/m173/s15240sx_2006/DSC_0055.jpg

[95KA-Turbo]

Awesome ^^^


I got my 15mm front spacers on, and my new exhaust:

http://i25.photobucket.com/albums/c51/95KA-Turbo/wheelswithspacers3.jpg

http://i25.photobucket.com/albums/c51/95KA-Turbo/wheelswithspacers4.jpg

http://i25.photobucket.com/albums/c51/95KA-Turbo/wheelswithspacers.jpg

http://i25.photobucket.com/albums/c51/95KA-Turbo/wheelswithspacers2.jpg

Bad pictures, but now they fit effectively like 17X8 -10 and 17X9 +3, can't complain about that!

[xamraci]

http://www.2amracing.com/Images/FOG2007/r10.jpg

17x8 +0 215/45 Hankook K106
17x9 +19 225/45 Hankook K106
Agressive ass Camber up front(few degrees less now)
2-3 Degrees out back

NO ROLL, NO PRESS, NO HAMMERING, STOCK fenders no Srubbing
Rolling Shot, can get some better shots tomorrow...

[CrimsonRockett]

Here's my 5zigen FN's 17x9 +20.

215/45's stretched all around.

Pretty much on factory spec alignment for now, but going with 2.5 degrees of camber in the rear, and 2 up front to have a little more clearance.

No roll, pull, nada.

http://img.photobucket.com/albums/v315/XxXxXAtreyuXxXxX/102_9176.jpg

http://img.photobucket.com/albums/v315/XxXxXAtreyuXxXxX/102_9191.jpg

http://img.photobucket.com/albums/v315/XxXxXAtreyuXxXxX/102_9178.jpg

[joecar]

put my friends eurolines on the back 18 x 9 zero
***LEARN TO POST PICS***

[S13SilviaGirl]

FARRRRRRRRRRRR Too many NON aggressive wheels in here....pruned as necessary! If your pics are gone....they wern't aggressive/pics didn't work/it was some BS posting....




If it is greater than +20 offset....don't bother!

[EJ253]

yeah, some fitment on this thread isnt the greatest.
but its still fitment none the less. and if anything, it will help show which sizes/offsets that someone wanting aggresive offset shouldnt get
thats my .02

[S13SilviaGirl]

yeah, some fitment on this thread isnt the greatest.
but its still fitment none the less. and if anything, it will help show which sizes/offsets that someone wanting aggresive offset shouldnt get
thats my .02

Read MrMephs original description....AGGRESSIVE only. It is not open for debate....now, if you feel this should be changed then, feel free to PM him and ask if he is willing to change it.

[Hooorahh!]

Read MrMephs original description....AGGRESSIVE only. It is not open for debate....now, if you feel this should be changed then, feel free to PM him and ask if he is willing to change it.
lol i would argue with lisa haha ..
and wow i wonder if my pix got deleted :sadwavey: .. haha .. ill check right after this