SUPER MADE **Group Buy**

[MadScientist]

I wanted to start the Group Buy on the First of the year but it took a bit to get all the pricing straight. So here it is... The First SUPER MADE Group Buy!!

http://www.super-made.com/instant/bonnet/bonnet.jpg
Instant Gentleman Bonnet Vents - $248.00 (set of 2)
http://www.super-made.com/instant/wing/180rs.jpg
Instant Gentleman Rear Wing, 180SX - $248.00
http://www.super-made.com/instant/wing/s13rs.jpg
Instant Gentleman Rear Wing, S13 - $248.00
http://www.super-made.com/instant/wing/s14rs.jpg
Instant Gentleman Rear Wing, S14 - $248.00
http://www.super-made.com/original/lens/lightkit.jpg
Instant Gentleman 180SX Headlight Set (Housing Only) - $248.00
Instant Gentleman 180SX Headlight Set (Halogen Set) - $568.00
Instant Gentleman 180SX Headlight Set (H.I.D. Set) - $1100.00
http://www.super-made.com/original/lens/s13l.jpg
Super Made Clear Headlight Covers, S13 - $248.00 (set of 2)
http://www.super-made.com/original/lens/s13c.jpg
Super Made Half Clear Tail Light Set, S13 silvia - $248.00
http://www.super-made.com/original/lens/s14l.jpg
Super Made Clear Headlight and Corner Light Cover, S14 Zenki - $298.00 (4pc. Set)
http://www.super-made.com/original/interior/fmc.jpg
Super Made Checkered Floor Mats, RHD Only!! - $150 (Set of 2)
These are available in a one-off so LHD should be easy to have made... production will have a 10 day delay.

All Parts are able to be shipped Via EMS (postal) so this will not be a long drawn out Group Buy. Group Buy Ends Jan. 30th!!! Delivery is estimated for Late Feb.

Shipping will be determined once the product arrives... most parts are not huge or very heavy so no crazy expensive shipping cost, unless your not in the US 48... I expect about $20-25 average, at most!!

Orders must be placed over Rare Trick Website: http://raretrick.com/index.asp?starting=&step=2&cat=1621&Action=cat&Page=1

Lets keep it clean and make it happen!!

Peace
Drew

[LookOut Nick]

wow i was suprised to see the s13 gents wing, coupes never get any loving.
ALL 3 wings are amazing Get Them!

[mr_240sx]

Drew, for the 180 are the gent wings drilled through the hatch or are they 2 way taped like the gp sports wings? is mounting hardware included with the wing?

[MadScientist]

Honestly, I have yet to see the wings personally, but I would highly suggest mounting any wing with more than double sided tape.

Peace
Drew

[Monkey Boy]

the s13 wing is sexy.

[yokotas13]

Honestly, I have yet to see the wings personally, but I would highly suggest mounting any wing with more than double sided tape.

Peace
Drew
my wangan is on with double sided tape

holds to 210 KPH

[chuy]

What about there version of the Greddy DD

[DonDeago]

Interested in floor mats, but of course drive a US Spec 240 ha, how much more would the price be to get the mats made for LHD?

[Slidin240Wayz]

Finally, a cheaper alternative to FK covers. I heart Drew!

You know I am in for those. If I rocked a carpet, I would get those too.

Drew, do you have any URAS hood vents?

Carlos

PS they're out http://cgi.ebay.com/ebaymotors/NISSAN-SILVIA-S14-240SX-KOUKI-LED-TAIL-NEW-200SX-drift_W0QQcmdZViewItemQQcategoryZ33716QQihZ007QQit emZ170061484812QQtcZphoto

LMK!

[90widebody]

Why are the 180sx Gent headlights so much they quoted me $460 shipped to me last month that was with the halogen set.

[MadScientist]

DonDeago and ALL - The Checkered Mats I will have Produced as LHD versions... as mentioned it wil delay the order by about 10 days. Pricing is the same.

90widebody - My normal MSRP is $653.00 for the Halogen model, and $350.00 for the Housing... not sure who quoted you but $460 is very off.

Carlos - I will order the Tailights for you whith the Group Buy if you would like them. No URAS Erobons in stock, same time frame, you get the idea... the next order to Japan is this Group Buys deadline. LMK.

Double sided Tape just seems to easy for someone to get sticky fingers.

Peace
Drew

[Slidin240Wayz]

Drew,
PM me a price on those taillights please.

Carlos

[MadScientist]

Sorry I missed this...
VIP Exhaust for S13 or S14 - $480.00
http://www.super-made.com/original/pipe/m2.jpg

Carlos - PM sent.

Peace
Drew

[upSLIDEdown]

Sorry I missed this...
VIP Exhaust for S13 or S14 - $480.00
http://www.super-made.com/original/pipe/m2.jpg

Carlos - PM sent.

Peace
Drew

Pics of this on a car?

[upSLIDEdown]

Pics of this on a car?

N/M... found it.
http://www.super-made.com/original/pipe/m1.jpg

[tacotacotaco]

Can you get the s13 tails in smoke?

[Triadz101]

by the 30th I'm getting those zenki clear headlights!!! retrofitting projectors, God you made my day!!!

[Team Rootbeer]

damn

i was hoping you had the aero
i hate my life.

[90widebody]

90widebody - My normal MSRP is $653.00 for the Halogen model, and $350.00 for the Housing... not sure who quoted you but $460 is very off.


Garage 13 gave me the quote

[MadScientist]

90widebody - Go for it...I honestly dont see reason to get the halogen or the HID when you can save sooo much by getting them seperate.

Team Rootbeer - Sorry, staying away from making this a Sea Freight.

Triadz101 - word...

kndacomplx - Negative... only Half Clear. G-Corperation has the Smoked... price is higher.

mr_240sx - You better get this wing... your car looks awsome!!

Peace
Drew

[FaLKoN240]

N/M... found it.
http://www.super-made.com/original/pipe/m1.jpg

More pics of actual CAR? I'm starting to grow interest in that exhaust.

[mr_240sx]

Drew ive been searching around google pics and such for that 180 wing but i cant find any working pics to see what it looks like from other angles..... cause right now from that one angle i cant really get a good look at it but from what i see it looks hot.

[DemonKiwi]

I sent you a PM

[coupelove626]

no rear roof spoiler for S13 coupe?

[MadScientist]

coupelove626 - Not sure they sell these anymore I have not seen them listed and I was not informed of pricing.

DemonKiwi - Like I had mentioned before I have yet to see many of these actuall parts I have listed. I do alot of Group Buy on random Rare Parts and companys so more of these parts, companies, and questions can be better sourced. The system should be a complete swap.

Found a SICK 180SX on egay with SuperMade Headlights...
http://i1.ebayimg.com/06/i/000/7d/bf/1793_12.JPG

Super Made Hood Vents...
http://img189.auctions.yahoo.co.jp/users/6/1/3/5/shop_supermade-img375x500-1151074389dakuto.jpg

WOW... 1 hour later... Hope that helps you guys.
Peace
Drew

[MadScientist]

OK Found pics of the 180sx, S13, Clear Tails, and VIP Exhaust.

Had to host the pics.

Peace
Drew

[mr_240sx]

is the wing for the 180 1 peice or 3 peice?

[MadScientist]

Super Made Wings are all 1pc.

Peace
Drew

[mr_240sx]

tks for the pics drew....i think you just sold me on that wing! plus it helps that the pics are pretty much the same colour as my ride as well lol

[MadScientist]

No problem... glad to help. I may be getting the S14 Wing and the Carpets for myself :drool:

If you guys are interested in the Suspension Arms I can add those to the GB list.

Peace
Drew

[Slidin240Wayz]

Drew,
Do they offer a single hood vent?

Carlos

[MadScientist]

Negative... only the double vent.

Peace
Drew

[Dr. Moreau]

drew this is ot but i've been meaning to contact you about a hood for my s13 front. haha i still haven't got one. rofl. lmk what you can do, i'm open to anything, fg, cf, metal, custom, etc.

i still owe you one.

pm me with some options and prices. i'm aware of wait times so it's all good.

[Teknolust72]

I'm interested in the black and white checkered floormats, LHD version. Is that complete set with the rear mats also? What kind of material is that (as good as KAROism?)

[BayS13]

PM'd you. also can you get the LED rear view mirrors? let me know!!

[MadScientist]

BayS13 - Yes I will get these for you guys if you like.

LED License Plate Frame - $149.00
LED Rear View Mirror Cover - Lead or Blue - $179.00

Teknolust72 - Super made said they are out sourced Floor Mats and that they are from a "High Quality Maker"... take that as you will.
Set of 2 Fronts only!!

Dr. Moreau - Squirle... a hood hmmmm... I'll see if I can find something in the US. I just got lucky on a M-Sport Front Bumper for the S14... I know the guys still has a Rear Bumper and Door Panels for an S13.

I have had a few people asking for large item parts from Super Made/ 326 Power/ & Yashio Factory for the Group Buys... The answer is NO!! Aero Parts are NOT on Group Buy... I am only processing a small parts order Via EMS (postal mail)... I CAN get Medium sized items like the URAS Erobon, and Exhausts... I CAN NOT get Front Bumpers, Hoods, Fenders, Etc.. from the Mailman!! Mailman already hates me... 80kgs in a single box was almost enought to give him a hernia once... but that shit was funny to watch!!!
:Ownedd:

Peace
Drew

[BayS13]

ive never seen the lisence plate cover. do you have any pics of that?

also make that wing possible!!! i will send you a cake. or a new puppy. :love:

[MadScientist]

ive never seen the lisence plate cover. do you have any pics of that?

also make that wing possible!!! i will send you a cake. or a new puppy. :love:
LED License Plate Frame - $149.00
http://www.super-made.com/original/illumination/ni.jpg
LED Rear View Mirror Cover - Lead or Blue - $179.00
http://www.super-made.com/original/illumination/mi.jpg

Thank you
Drew

[Slidin240Wayz]

haha, it says SPERM... JKJK.

Shoot me a price for the Uras Erobon I couldn't find the one you mentioned. I am also still awaiting a response from the PM I sent you yesterday.

Carlos

[tr_racing]

You don't take paypal????

Kevin..

[MadScientist]

I am cutting alot of really good deals for you guys on this one.... No Orders yet???!!!
I know there is plenty of time, but dont forget about it and miss out.
:love:

I only have a personal PayPal account... last resort only!

Peace
Drew

[C3Hove]

Can you PM me a quote for super-made light kit...halogen

-housing w/ lighting and price after group buy

Thanks alot, Chase

[BayS13]

wait till payday!!! GAH!!!

then im for sure gettin the frame and the mirror.ANDDD THAT LOVELY WING IF YOU CAN MAKE IT POSSIBLE BABY!!!! :love: :love: :love: :angel: :angel: :aw:

[Slidin240Wayz]

Drew,
Since I am ordering other stuff I need to send a specific amount to you. Let me know how you want to go about it.

Everyone else,
Get your arses moving! Drew is getting the hard to get goods. He connects us to Japan at very affordable prices. You need to take advantage of the situation now instead of crying in your bed later. Order, them parts.

Carlos

[reaxion]

i am so in for the headlamps. put me down...!

[Dr. Moreau]

drew you always gotta do these bad arse gb's when i'm lacking funds. argh! i need a damn YF water pump pulley damnit! i keep missing out on it! =(

[MadScientist]

C3Hove - My normal MSRP is $653.00 for the Halogen model, and $350.00 for the Housing.

BayS13 - :bigok:

Slidin240Wayz - Order off site and I will make changes... that way you have documents also.

reaxion - My GBs dont work like that... You want it, you order it... no counting hands, hit me later, put me down, etc...
Click here and fill in the blanks!! (http://raretrick.com/index.asp?starting=&step=2&cat=1621&Action=cat&Page=1)

Dr. Moreau - Yashio Factory?? I dunno man... this is the Super Made GB.. lol.

Peace
Drew

[LB.Motoring]

damn that License Plate is so fresh. Give me info on it.



GOOD Stuff everyone, Buy this man's Items!

[Dr. Moreau]

Dr. Moreau - Yashio Factory?? I dunno man... this is the Super Made GB.. lol.

Peace
Drew
yea i posted it in this thread lol. YF gb going till the 30th too right?

you geared up for the football game tonight or what?

[C3Hove]

So in total that is $1003.00 for a lighting kit? normal price

I'm so confused, I feel dumb

[Slidin240Wayz]

Slidin240Wayz - Order off site and I will make changes... that way you have documents also.

Peace
Drew


Drew,

I do not understand since the only way we order is on site. Did you mean to just order on the website or call in the info? Let me know.

Carlos

[MadScientist]

Slidin240Wayz - Yes... My Bad... Just off the site is fine... I dont have the Tail-Lights on the site yet, but that I can add to the order after its placed, same with the prices.

C3Hove - OK... Halogen Model Kit includes the Housing and is a Complete Kit.... some people want just the Housing Kit so that has a price all its own. You only need to buy one of the Kits.

Dr. Moreau - SAINTS WIN!!!! hahahahaha!!!

LB.Motoring - LED License Plate Frame is wired to a 12V source and includes a text controler.

Peace
Drew

[BayS13]

is it the same with the rear view mirror? controller n such?

[MadScientist]

BayS13 - But of course... how else are you going to write "SPERM MADE" on it???

Peace
Drew

[bryce with a y]

so do you currently have the exhaust? or is that special order?

[MadScientist]

so do you currently have the exhaust? or is that special order?

All Parts are able to be shipped Via EMS (postal) so this will not be a long drawn out Group Buy. Group Buy Ends Jan. 30th!!! Delivery is estimated for Late Feb.

Peace
Drew

[Slidin240Wayz]

I placed my order and you should too...RIGHT NOW...TAKE ADVANTAGE OF THIS GROUP BUY!!!

Do It!

Carlos

[MadScientist]

Bump... Time is running out guys!!!

Peace
Drew

[samplesurf]

i looked on your site in the gb section to purchase the license frame and it wasnt on the list so how do i order one?

[S13 Charlie]

Apologies if this has already been asked, but how does that S13 wing/spoiler mount? Does it reuse factory holes, or at least covert the holes up?

thanks,

Charlie

[MadScientist]

S13 Charlie - see first page.

samplesurf - Sorry I was slacking on making that listing.

LED Mirror Cover is Avaialable in RED or BLUE LEDs... sorry my Engrish was off on the original post.

DO NOT miss out on this Group Buy... Ends Jan. 30th.

Peace
Drew

[ootranceformeroo]

hey drew I pm'ed you. Thanks bro.

[Slidin240Wayz]

People,
Did I mention that you should buy parts NOW! Well, buy some parts now. Don't be a fool, be a genius!

Carlos

[FaLKoN240]

PM Sent.

I can't wait to have gangsta carpets.

[BOROSUN]

wooohoo compulsion buy, at 4:00am too.

[MadScientist]

BOROSUN - hmmm... not sure if I can get a Front Lip shipped (via) EMS... in fact I know I can't... but I may can get it shipped FedEx or UPS.
This shipment is looking to have some larger items involved so I will see what I can do to get that over with the GB.

240FaLKoN - PM replied

Slidin240Wayz - :angel: (has stuff on order too)

ootranceformeroo - PM replied

Peace
Drew

[bryce with a y]

hey how do i go about ordering the VIp exhaust since it isnt on your site??

[MadScientist]

VIP Exhaust has now been added.... Thank you

Peace
Drew

[FaLKoN240]

What if we want the LHD mats? Is there a special option, or something we need to do?

[MadScientist]

What if we want the LHD mats? Is there a special option, or something we need to do?

I did not justify LHD or RHD on the order page bacause most people in the US want LHD... they are custom made to order... all you need to do is order off the site and I will have LHD versions made.

Thank you
Drew

[tacotacotaco]

Crap i dont get paid till the 2nd! my hearts already broken from the uras group buy now it will be broken again.

[MadScientist]

It will probably take longer than 2 days to collect all the funds anyway... just order off the site now... you will not be charged untill after... and I will be contacting most everyone first.

Just dont have me waiting a week after the GB ends to collect.

Peace
Drew

[ootranceformeroo]

I dont think I got the PM drew. Did you send it?

[MadScientist]

4 days till Group Buy Ends!!!

Last chance....

Peace
Drew

[vw_nissan]

Hmmm....Zenki clear headlight covers........:2f2f:

[Slidin240Wayz]

Hmmm....Zenki clear headlight covers........:2f2f:

Yes, they are yummy..GET EM!

Carlos

[Full-Lock]

Does anyone happen to have a a picture of the Instant Gentleman Bonnet Vents on an S14?

Thanks,
Chase

[Tenchuu]

what is the availibility of these S14 clear lenses after the GB? and are they plastic of glass? i am tempted, but working on getting a LS1 right now so am thinking i will have to wait. but have been looking for them for years now. also what is the change of the light distribution with them? any pics? i am rocking some HIDs and don't like the look of the glass fluteing on the stockers.

[ranger2339]

It will probably take longer than 2 days to collect all the funds anyway... just order off the site now... you will not be charged untill after... and I will be contacting most everyone first.

Just dont have me waiting a week after the GB ends to collect.

Peace
Drew

Ok so i get paid on the first, i think i might have the money in my account now, i guess we will see. I just ordered the exhaust..Order Number 1389

Is there anyway for you guys to wait to charge my card untill the 1st??:eek3:

Thanks
Josh

[BayS13]

i pm'd you drew plzzzzzz lemme know asap!!!!

[MadScientist]

BayS13 - PM sent...

ranger2339 - No problem..

Tenchuu - may have to search on that... I have no info on light patterns, HID, etc... These are a Clear Plastic Replacement that has NO projection patterns.

TOPSECRT88 - I serched Yahoo Jp and found a few pics but nothing on S14... see first page.

Peace
Drew

[FaLKoN240]

Tenchuu - may have to search on that... I have no info on light patterns, HID, etc... These are a Clear Plastic Replacement that has NO projection patterns.

Peace
Drew

The light pattern is determined by the projector, having a GOOD projector combined with a CLEAR lense is ideal, IIRC.

[Tenchuu]

The light pattern is determined by the projector, having a GOOD projector combined with a CLEAR lense is ideal, IIRC.

i was actually referring to the fluting in the glass that covers the projectors and the brights on the kouki lights. i just plain don't like the way it looks and have seen on some that there is a non fluted version of that headlight made, weather custom or no that got rid of the fluting and i was wondering how this effects the light projection pattern.

[Slidin240Wayz]

Drew , Tenchuu, VW Nissan, and anyone else interested in the clear covers.

Clear covers with OEM ballasts and bulbs just siliconed in place:

http://memimage.cardomain.net/member_images/12/web/684000-684999/684902_9_full.jpg

Clear covers with HID Retro:

http://memimage.cardomain.net/member_images/12/web/684000-684999/684902_24_full.jpg

Crooked beam but you get the point. I fixed it afterwards:

http://memimage.cardomain.net/member_images/12/web/684000-684999/684902_19_full.jpg

Improved lighting anyone?

http://memimage.cardomain.net/member_images/12/web/684000-684999/684902_12_full.jpg

The problem with bi-xenon projectors is the size of the projector. If you can make it fit, you can enjoy this:

http://memimage.cardomain.net/member_images/12/web/684000-684999/684902_123_full.jpg

http://memimage.cardomain.net/member_images/12/web/684000-684999/684902_124_full.jpg



So what does that mean?

BUY THEM!

Carlos

[FaLKoN240]

Yay, I was right.

[vw_nissan]

[QUOTE=Slidin240Wayz]Drew , Tenchuu, VW Nissan, and anyone else interested in the clear covers.

Clear covers with OEM ballasts and bulbs just siliconed in place:

http://memimage.cardomain.net/member_images/12/web/684000-684999/684902_9_full.jpg

Crooked beam but you get the point. I fixed it afterwards:

http://memimage.cardomain.net/member_images/12/web/684000-684999/684902_19_full.jpg


Thanks for the pics.

That means it's a damn must to retro fit projectors with the clear covers, otherwise, you will have a hard time driving at night.

[Slidin240Wayz]

I don't know how the clear covers look with regular bulbs, but it would be alot better than the hid bulbs in there.

Carlos

[MadScientist]

:stupid:
Carlos is my Hustler!!! :whip: j/k!
:bow:

Peace
Drew

[Slidin240Wayz]

I hope you don't you are whipping me brotherman. I am just pushing the quality parts!

Also, remember hustlers get 20% ya heard!

Carlos

[MadScientist]

:naughty: hahahahah!! I feel that.

OK I hae some clarity on the HID Headlights... got e-mail for SuperMade finnaly..."The HID set is including FRP covers and four xenon lamps."

2 Days... then *poof*...

Peace
Drew

[OETKB]

Will the instant gentleman wing for the 180sx cover the holes in the hatch from the origianl wing? it's impossible to tell from the pictures.

[FaLKoN240]

Sent a PM, problem with ordering. SO CLOSE TO DEADLINE!!!

[freepunk]

Crap lost my CC recently but I have it saved on paypal!!! I have the number but not the CVV number that you need at checkout. I can pay with paypal instantly. please pm me or email me with how I can get you the money. Really want one of those 180sx wings. Want to get in on this deal!
Thanks!
Brady

[MadScientist]

freepunk - sorry no PayPal... you can call me to place the order... you can also call your Credit Card company and have them issue a one time #.

240FaLKoN - PM replied. Anyone having issues with Ordering Please Call To Place the Order!!! Thank you!!

OETKB - First Page of thread... this wing is not in the USA (hence the reason its being offered) I can Not say if it will cover or use the factory holes.

Checkered Carpets... Turns out the RHD is slightly different that the LHD... If you have a S13 or Hatch... I will need Full sized Tempates made and sent to me. Its easy...just trace the outline of your Mats onto PaperBoard roll up and ship to me in a Tube.... like fine art!!

Thank you
Drew

[freepunk]

Tried calling today and couldnt get a hold of you. Left a message. I know your busy so I will try again tomorrow.
Thanks!

[Slidin240Wayz]

PM Drew, it will be easier to get in contact with him.

Carlos

[freepunk]

Will do, Just trying to pay over the phone becasue I dont have my CVV number on the back of my card and dont want to miss out on this GB.

LAST DAY!!!!!!:hyper:

[FaLKoN240]

I don't wanna call you too early, and I have work until 6pm here, what do I do? I'll just PM you what I want, and all the info you need when I'm at work.

[MadScientist]

WebAdmin is having alot of issued... so we are going to be switching servers!!

Group Buy is going to stay up till the thransfer is complete... You want it... get it now... Absolute LAST CHANCE!!

I dont like to delay things, but this is a must!!

Peace
Drew

[Slidin240Wayz]

How many more days?

Carlos

[the head]

Order placed thanks for the hookup on supermade Drew

[MadScientist]

Server/ Website/ Admin seems to be working alot better now.

Group Buy will Officially End - TODAY!!!
I will start collecting funds from everyone tomorrow!!

Thank you to everyone that ordered... This Group Buy did very very well for its first time around. Everyone that missed out... I will do this again in April!!

Peace
Drew

[bryce with a y]

awesome thanks again bro. i think it was meant to be!

[freepunk]

Still want to get in on this! Will try to call you again today Drew!
PM sent
Thanks!

[JH]

Will the instant gentleman wing for the 180sx cover the holes in the hatch from the origianl wing? it's impossible to tell from the pictures.

Covers holes as well as completely covers third brake light. og holes can be used to run self-tapping screws into spoiler for mounting in addition to using double-sided tape.

[MadScientist]

Majority has been charged... only about 12 orders (both GBs) need to be collected due to Decline or AVS MissMatch... calling those today.

Other than that the Quote has been sent and recieved...

OK, I am checking the shipping cost by door to door service cheaper than FedEx, UPS, or DHL. Please wait until next week.

FreePunk - I am going to call you today!!

Peace
Drew

[bryce with a y]

ur the man drew!

[jrocslider]

have money ready in april for the checkered floormats... i've wanted them forever. put me first on the next list please... and thanks

[freepunk]

FreePunk - I am going to call you today!!

Sounds good!

[white97s14]

i wish you had kouki head light covers =(

[MadScientist]

OMG... OK... little issue that needs to be resolved really fast... The Exhausts are Killing this shipment!!
Think there is a Total of 6 on order... the Shipment weight is 350lbs.
Thats 5 times heaver than postal EMS will allow, and 2-3 times heavier than FedEx will allow. The current shipping quote from Japan is nearly $2000... that means I am taking a huge loss... SO... The entire shipment can go Sea Freight and take 2 months to arrive... or No Exhaust!!

I have requested a new shipping quote w/o the Exhausts.

Sorry guys...
Peace
Drew

[bryce with a y]

shit man. i got an exhaust. and i CAN wait 2 months.

hmm this is shitty

[Slidin240Wayz]

Drew,
If it goes through sea freight will it affect everyone?

Will it be half EMS, half sea freight?

If you have the exhausts on sea freight, let me know if I can order a URAS Front Bumper.



Carlos

[MadScientist]

I am seperating the shipment right now.
The smaller items will be shipped normal EMS... however this problem has delayed the entire shipment for everyone.

Carlos... let me get some idea of shipping on large items again before ordering.

Peace
Drew

[Slidin240Wayz]

Drew. I pm'ed you. Please get back to me.

Carlos

[bryce with a y]

so did we figure anything out here?

[MadScientist]

OMG... talk about lost in translation!!

OK so the Original quote they sent was totally wrong. I had made a request for a price list for 326 Power... well they were quoting me shipping on everything from 326 Power. NOT the order I sent... I cant believe this!!
:loco: :confused:
OK so the actuall order is being quoted now... with Exhaust!!
Should have info by tomorrow or next... 1000 apologies you guys... I know that killed over a week.

Peace
Drew

[MadScientist]

New Quote was recieved last night... they are checking availability of parts and shipping cost... should know more tomorrow or next.

Peace
Drew

[Slidin240Wayz]

Drew,
Any update?

Carlos

[MadScientist]

Looks like everything is in-stock in Japan so collecting time shouldn't be very long. Waiting on shipping estimate so I can transfer funds to Japan.

Peace
Drew

[nismoWhore]

is everthing going to you first? then out to us or straight to us from japan?

[fast93]

is instant gent the only ones that make those headlights? cuz the one on the black 240 looks like its all one piece and not 2 pieces in that picture.

[Bubba]

OK I am sure someone has already broken this down for you but here it is again. The ones on the black 240 are the Super Made lights. When you put the lids on u can hardly tell they were 2 peice. (Unless you got right up on them) Drew doesn't bullshit you for a sale. :bigok:

[boyou2]

i've sent you a PM ;)

[nismoWhore]

any updates?

[MadScientist]

OK.. I know you guys are blind as to what is going on so I will try to explain... its simple really.

UPS ... JPY331,000 yen
Yamato Logistics ... JPY250,000 yen

We recalculated the shipping cost which contained five
VIP-mufflers shipped by Yamato Logistics.
It is JPY375,000 yen. Three cartons.

This is a quote for shipping by Freight from Japan to USA... a Crate basically.
The difference is JPY125,000 yen / 5 exhaust = JPY25,000 yen each!

I also had them quote shipping on a single exhaust from Japan to the USA Via UPS (because its to big for normal EMS) - Super Made VIP muffler by UPS: JPY42,000 x 2 cartons each.

This is the math for EMS and UPS:
Maximum dimension of EMS
width + (height + depth) * 2 <= 275(cm)
width < 150(cm)

Maximum dimension of UPS
width + (height + depth) * 2 <= 330(cm)
width < 270(cm)
C/W(kg) = (width x height x depth)(cm) / 6000

Here is some more basic fun to figure out... We were including a few Extra goods like the New URAS Erobon Type 2... this is how they calculate.
URAS Type 2 Erobon cannot ship by EMS because they are large a little. We have to caluculate the Type2 Erobon by C/W.
Carton of 2 Type2 Erobon is 110x15x90(cm). C/W is 25kg.
*2 URAS Type2 Erobon ... UPS: JPY29,000

Although the price is the same for type1 and type2... the shipping is very very different, and causes the type 2 to be much more expensive.... about $150+ to be exact.

What does this have to do with the Super Made Group Buy??
Well it looks like I will be refunding all the VIP Exhaust Orders this week.
Also the 4 Gentleman wings ... UPS: JPY42,020... so we will be taking a loss and price will have to be increased on website.

Everything else seems to be great as far as cost and shipping becuse they are smaller items and easy to consolidate... The above is why we have stopped doing Sea Feight for larger items as well... its not cost effective unless in extremes.

So Yes... it has taken basically over 1 month to get shipping cost and estimates that are somewhat reasonable for the rest of the shipment.
I greatly oppologise to everyone for the inconvience and I will be processing this ASAP now.

* I will be looking at alternative shiping methods on my own time when no time constraints are present.
** ONLY Customers that Ordered the Super Made VIP Exhaust I and Offering the Buddy Club Spec II for $400 shipped to make this up to you!! Let me know...

Peace
Drew

[amplifi3d]

is there a way i can pay extra to compensate for shipping and still get the 2 instant gentleman exhausts I ordered? I run an import shop over in Hawaii and I know how shitty shipping can be. I'm pretty sure people who ordered the exhausts would be willing to pay alittle more to help you out.

Thanks!

[bryce with a y]

i know i was, but it would be roughy 400 bucks each exhaust in shippin....

[MadScientist]

Think about it logically... VIP Exhaust is $480 each + $420 shipping from Japan = $900... its not Titanium, ultra light weight, Race only, or worth it... I spent over $800 on my Kakimoto but thats not far off the normal price, and its Jasma Spec.

I didn't think shipping Exhaust would be an issue... we have done it in the past by EMS/ UPS (My Kakimoto, others URAS RS)... however I think this was mainly limied on size because of the Super Made Wings took alot of space... Japan also didn't want to consolidate the exhaust because the Tip is delicate.

I will do a Super Made Group Buy again after this shipment arrives... no exhaust... and limited # of Wings.

Mitzi took care of Refunding all Super Made VIP Exhaust orders last night!!

Peace
Drew

[Zer013]

Mitzi took care of Refunding all Super Made VIP Exhaust orders last night!!

Peace
Drew
how long til we should see the money back.

[bryce with a y]

how long til we should see the money back.


exactry.

length

[nismoWhore]

more like how long til the group buy stuff gets here

[mazdaRX7Galantvr4]

Would really like to receive parts ordered in January, sometime soon.

[FaLKoN240]

If anyone bought the checkered mats, I want to see pics.

[spectro]

Any idea when we are getting the GB stuff like the lens covers?

[MadScientist]

Money has been transfered to Japan.
Parts are being collected now.

This order does have alot of extra parts on it.

We got the shipping situation fixed... VIP Exhaust have been refunded.
Everything else is working.
Some of you guys have not paid... or responded to my e-mails.
Those of you with Floor Mats I have asked several time for you to send me Templates and have YET to recieve any!! I have tried getting some from Locals but oddly No-one has Floor Mats in their S13 or Hatch... SEND ME TEMPLATES FOR S13... ASAP! I will have to overnight the template to Japan to keep the order on time again!! :spank:

Peace
Drew

[Slidin240Wayz]

Drew,
Do you need templates for all four?

Carlos

[MadScientist]

Carlos,

Thank you... your the pimp. S13 only... I have S14. Just need the front set.
I went to Office Depot and got a Huge Easle Pad (27"x34") has about 50 sheets... forgot what it cost, but it was perfect size for mats. I did the S14 and Z33 templates already.

For everyone crying over this taking so long... honestly I am sorry for the constant stupid little delays like this. This is common when dealing with new companies and new parts. Next time I will know ahead of time what to expect and what to offer.

Thank you
Drew

[Slidin240Wayz]

Drew,

I have to go to my friends house because he has an S13. Can I take a picture of them and have a white background and write down the measurements?

Or, is a template the only way? I would need to be reimbursed or discounted something because of the easel size paper and shipping. Just PM me on that issue.

I might just tape some sheets together and use a marker. LMK if that works as well.

Carlos

[bboyt3nsk]

I assume this means the Yashio Factory parts too...thanks for the update, I, and we appreciate it.

[MadScientist]

^^ Unfortunatly, Yes YF Group Buy is on the same shipment.

Carlos,
I will take care of you for helping... Need full template.

Peace
Drew

[Slidin240Wayz]

I will do the 9 pieces of paper taped together and use a sharpie for each mat. I will be at an event tonight so I will acquire it tonight and send it tomorrow in the AM!

Please PM me the address to send it to.

I will send USPS Overnight in support of RT and expediting everyones floor mats.

Carlos

[Slidin240Wayz]

Drew,
I have your template. I need an address.

Carlos

[MadScientist]

Carlos,

Thank you.... send it to the following.

Rare Trick, LLC
P.O. Box 231218
Harahan, LA 70123

I will overnight this to Japan the same day its recieved.

Thank you agian...
Peace
Drew

[Slidin240Wayz]

Drew,
There is an issue. I traced out the floor mats of an S13 Coupe, which cuts around the hump on the driver's side. I saw a picture of a Hatchback's driver's side mat that goes over the hump. What do you want me to do? I can also get the template of the one that goes over the hump, but I will not be able to send it out until tomorrow. Since I will send it express, it will still arrive to you on Saturday Morning at 10:00am.

Carlos

[MadScientist]

Do both please. I will call customers and see what they have... I will send both to Japan anyway so they will be on file for later.

Peace
Drew

[Slidin240Wayz]

Drew,
I will go tonight to my boy's house to get the other template.

Overnight will get there Saturday. Will this do any good or is it possible to send it to Japan Saturday morning, or will you have to wait until Monday?

Carlos

[Slidin240Wayz]

Drew, Drew, Drew,

I went to a party last night and I went to my friend's house around 2:00am and I found out that the floor mats were thrown out. I called another friend and setup to meet with him this morning at 9:00am. I arrive there and he has the cut-around-the-hump style. He told me to hold on a second and said he had another pair from his old car. It ended up being the same thing.

I have looked into coupes and hatches and they both have the same style. I have to check if it has anything to do with the year model. I will hold off on sending the templates out until I check a newer model S13's floor mats. Forgive me for the delay, I am on my 3rd S13 and still have the same result. Wish me well.

Carlos

[MadScientist]

I believe the Hump is normal for both because the S14 has the Hump also.
The only mats that may be slightly different is the S13 Vert because it has an extra brace near the foot well.

I'll hook you up on the shipping when your parts arrive or throw in some extra goodies.

Peace
Drew

[Slidin240Wayz]

Drew,
I will just ship you what I have right now. I checked with a friend with a 93 and he told me the same thing. I will send out the package right now; USPS Overnight.

Carlos

[Slidin240Wayz]

Drew,
I was trying to send it via Express on USPS.com and it was not going through. I went to the post office right away and I found out they do not do Express to your zip code due to the Hurricane. I was able to ship it Priority.

Delivery Confirmation Number:
0306 3030 0003 2439 4970
www.usps.com

Wishing you the best,
Carlos Doria

[MadScientist]

^^^ the real truth!! Yeah almost a Year and a Half ago and shit is still jacked up down here like it was yesterday. Big kick in the balls was doing the taxes from 2005 to 2006.... huge difference!!

Thank you for the tracking I will next day it to J-Land once it arrives.

Peace
Drew

[kouki180sxdrfta]

Spam ....

[MadScientist]

^^^ SPAM.... thats nice... he has contacted me in regards to this also however the cost is higher. I have not looked into this any further, and will not untill the current shipment arrives. Also it seem to me that OneTone is very very new to the game of importing (talking to him reminded me of how I was about importing a few years ago)... its not that easy.

Also next time... dont try and thread jack! And have OneTon start their own thread if they reall wish to offer something!

Peace
Drew

[Slidin240Wayz]

Also next time... dont try and thread jack! And have OneTon start their own thread if they reall wish to offer something!

Peace
Drew

Da troof. Drew, did you receive the templates?

Carlos

[Slidin240Wayz]

Status: Notice Left

We attempted to deliver your item at 11:53 AM on April 2, 2007 in NEW ORLEANS, LA 70123 and a notice was left. It can be redelivered or picked up at the Post Office. If the item is unclaimed, it will be returned to the sender. Information, if available, is updated every evening. Please check again later.

[MadScientist]

Status: Notice Left

We attempted to deliver your item at 11:53 AM on April 2, 2007 in NEW ORLEANS, LA 70123 and a notice was left. It can be redelivered or picked up at the Post Office. If the item is unclaimed, it will be returned to the sender. Information, if available, is updated every evening. Please check again later.

Yeah thats because it was sentto a PO BOX... I do have the Templates!! Thank you very much!! Templates have been shipped out to Japan as of Last Night... they should arrive late today, early tomorrow. Super Made quoted a 10 day processing so I should expact shipping details in about 15 days.

Thank you agian
Drew

[Slidin240Wayz]

Nice! Progess rules. I hope it all goes well from now.

Carlos

[MadScientist]

^^ no joke... 5 years I have never had an EMS order get dragged through so much mud. I was going to do a GB in March and April but I feel bad offering new specials when this is still working. I hate being Emo!!

URAS, D-Max, & HPI Group Buy anyone???? those are the prospects!

Peace
Drew

[LookOut Nick]

Uras !! FTW
msglngth

[Slidin240Wayz]

No D-max aero (bumpers, fenders, sides and rear)...only bad reviews.

Uras G Sonic- YES!

HPI???

[bryce with a y]

if yu can keep the costs low on the dmax hoods you will make a killing.

[JH]

^^^ SPAM.... thats nice... he has contacted me in regards to this also however the cost is higher. I have not looked into this any further, and will not untill the current shipment arrives. Also it seem to me that OneTone is very very new to the game of importing (talking to him reminded me of how I was about importing a few years ago)... its not that easy.

Also next time... dont try and thread jack! And have OneTon start their own thread if they reall wish to offer something!

Peace
Drew


>HAHA< Very interesting. You gotta realize I've been into this "game" for probably longer than a lot of people on here can drive. And if you search far enough back on some message boards you'll see stuff from Japan that people tried to pre-sell on the internet back in the days that actually used to belong to my friends and I in real life (iHATEstupidity on FA till circa early 2000s or so, and TheDemon before that, till probably 97 or so...and then I had collaborated with a friend on www.sr20parts.com that sold imported parts-some larger than ems could ship through GI/tax-payer channels-back in the late 90s, too). Those who are older than 25 and who've been around for a while will prob know of me...otherwise 99% of today's internet-based 240 folks won't, and that's how I like it actually. I was slowly trying to get out of dealing with car stuff, including the importing, so it's all done on just an almost personal, onesies-twosies-tensies scale now. But I've definitely never tried to have my life revolve around hocking imported parts..it's always to help people get stuff they can't get otherwise (like I'm not going to bother bringing in Work wheels anymore after getting dozens of them years ago before they finally decided to push to the US), but I'm also not a greenhorn.

Anyway, I'm not here to spam.... heck, I'm never really even here on this board (this is still a friend's defunct acct, so no need to send this acct a PM or email, and I prob won't see any replies unless someone irl tells me to check out the thread again), but I'm here to tell people to still support you guys... heck, email rare trick and tell them you want SM exhausts everyone! I'm sure if they get enough interest to make it worthwhile/profitable for them, they'll find a way to get them over...or they'll email me back. >HAHA< :)

[MadScientist]

Dear Drew,

- Yashio Factory
I am waiting their answer.

- Super Made
They have all products in stock except checkered floor mats.
Floor mats will complete April 20. But, they may not be able to
be possibly made by shortage of material, they said. I am
waiting their answer.

Garage Defend, URAS, Attain, G-Corporation, Sexystyle,
HKS-Kansai, and JUN are already arrived.

We are going to ship some of arrived products by preceding.

Thank you,


I have my ways!!

Peace
Drew

[iwishiwas-all*]

Drew... URAS FTW DOOOOOOO ITTTT. u think ull get the new 180 kits in they jsut released?

[synergy_motorsports]

how can i get some of the zenki clear headlights..

[MadScientist]

Update:
Dear Drew,

I got answser from Super Made. They said that they will be able
to ship floor mats and the other on 19th. We are going to
repackage and ship them on 23rd (next Monday).


WOOHOO... my god this has taken forever!
Super Made is almost as bad a URAS was when we first delt with them... I will still carry their products, and at least now you guys have seen the BS happen 100% of the way.

Peace
Drew

[Slidin240Wayz]

Nice!

ETA; and of April?

[MadScientist]

If it ships on the 23rd (Mon) it should take 3-4 days to arrive...so Thur/ Fri.
Give me a couple days to Inventory and Package (over weekend)
So the Following Monday (30th) should have tracking and shipped out to everyone.

Peace
Drew

[BOROSUN]

^yay! waiting for this was like watching the titanic movie in slow motion.

Q?: is supermade material made of normal floor mat stuff or is it anything like
karoism or azect sisalon material.

[s14gj]

I'm looking for the 180sx wing and the vip exhaust so what do I need to do?

[S14TEVE]

how can i get some of the zenki clear headlights..
Good question, i couldn't find em on the website.

[suberi_RPS13]

how much for the 180 headlight housing shipped to 47712

[MadScientist]

^^^^ hahhahahahahah... ummm... Group Buy has been over with for some time.
If you are interested in the products you menetioned above I will finish listing Super Made products tomorrow... next order to Japan is May 7th.

Super Made Group Buy Update: :rant2:
I wanna kill... this is worst then dealing with URAS first time around... This was suppost to be shipped Monday... its Thursday... Unless it ships out tonight or tomorrow... its going to be delayed for Golden Week Holiday in Japan, because everything is Closed... for 10 days!! :rant2: OMG!! I dont think you guy are nearly as pissed as I am, but this is :rant2: :rant2: !!
Going to check the PO tomorrow just in case to looney fools forgot to send me tracking.... :rant2:

Peace :angel:
Drew

[MadScientist]

Dear Drew,

I couldn't get an availability of G-corporation carbon pillar
cover yet. The other parts arrived to our office. We are going
to ship all parts except carbon pillar tomorrow.
I'm sorry for the delay.

:-/ :goyou:

Good enough... dodged the holiday bullet!

Peace
Drew

[bryce with a y]

hah i bet people really want their floor mats by now...

[amplifi3d]

yep. i want em bad.

[wantboost]

hmm, i really want in on the next group buy/order but not if this bullshit happens again, just for a spolier and some tail-lights

[MadScientist]

I understand that ^^^ infact that is what stray most people away from buying Special Order (or Made to Order) parts from Japan... and even less Businesses.

This was bad, I agree...It even makes me look bad, but now you see where people instantly throw a bad reputation at us too!

Next shipment will not be as bad... this was like an ice breaker so Super Made will know what to expect from us, as well as, I know what to expect of them.

Update: Shipment was shipped from Japan in 6 boxes... 2 Boxes arrive today... 3 tomorrow... and 1 Friday or Monday! I will be doing Inventory, Quality Control check, Boxing, Collecting for Shipping, snd Shipping the parts the rest of the week.

Thank you
Drew

[MadScientist]

Update: Shipment was shipped from Japan in 6 boxes... 2 Boxes arrive today... 3 tomorrow... and 1 Friday or Monday! I will be doing Inventory, Quality Control check, Boxing, Collecting for Shipping, snd Shipping the parts the rest of the week.

Thank you
Drew

Correction:
I just wentto the PO to pick-up the first 2 Boxes and they gave me all 6...:w00t: :w00t: :w00t: :faint:

Peace
Drew

[Slidin240Wayz]

Ballin...woot...pics!

Tracking numbers would be nice as well.

Expected delivery date?

[MadScientist]

Inventory... :ugh: :ugh: WTF!!! :tweak:

Soooo... ummmmmm... Obviously Super Made is retarded!!
Every Invoice, even the shipping manifest says (TWO) 2 (#2) T-W-O... thats 2 Checkered Floor Mats for 180SX/ S13!!
They sent me one (1) S13... and (1) S14?!?!
amplifi3d - Your in Hawaii... yours was the second order... you tell me what you would like (refund/ wait it out)... next order is being processed end of this Month!!

Ohhhh... yeah... Attain sent out a Cracked... and I mean from the Factory, Mechanical Failure, Cracked Solid Shifter!! This should have been caught by their Quality Control... hell it should have been caught by my guys in Japan!
This is the exact reason why I check Everything (out of box) Personally!!

I have alot of extra little stuff (Yashio Factory - Drift Knobs, Accessory Kits, Water Temp Adapters/ URAS - Inspection Books, Racing Gloves, Erobons)... I'll post it all in the Dealer Specials once everything in the GBs are boxed and ready for you guys first!!

Peace
Drew

[BOROSUN]

:duh: lol...



msglength

[MadScientist]

If you have not recieved a Tracking # by e-mail then you need to contact me (504) 296-0103 about payment for shipping!!

Most the small items are only $10-15 for shipping... Headlight Kits are about $20-25... Erobons are $25+

I have not processed the Wings yet... I need to find suitable boxes first... they are able to be shipped FedEx Ground so shipping shouldn't crazy.
I must say the Wings are very very Nice and great quality!!

I will do a GB on Super Made again later... not sure if I will include the Floor Mats in the next GB. URAS and HPI - Group Buys are in the works but holding till majority of this shipment is out.

Peace
Drew

[amplifi3d]

how much longer am i looking at waiting now? are you saying im going to have to wait another MONTH? do you realize it's been 4 months since the end of this group buy?

[MadScientist]

Do you really think I dont know that?!?! Have you been reading?!?!
Not an error on my part... realize that... then decide what you would like to do!

This shipment gets more and more f%^* up every day... I just Inventoried a JUN Flywheel that is suppost to be for a 1JZ-GTE... guess what... its for an RB26!! Shipping Manifest and Invoices are all Correct... the products I recieved are all wrong!!!

I'm not trying to be an asshole to anyone but this shipment is Fucked, and I am pissed off over the stupidity of how it was processed!! 5 years and nothing has ever been this tragicly wrong!!

ETA...?!? I dont know... I dont know if I feel like dealing with Super Made again!!

I can't get any answers from Japan untill after Golden Week is over!!

Peace
Drew

[BOROSUN]

drew, ill give a call on monday.

[OETKB]

when is the spoiler for my hatchback going to ship?

[MadScientist]

OK... today was good... Attain is sending out a new Shifter ASAP, no questions asked! I got alot of the shipment sorted out, boxed, and labled to ship Today!!

WINGS... I am going to get some Bumper Boxes today so I will see if I can find something for these... I will get them out first thing tomorrow!!

Chase - JUN Flywheel for RB26... you know you want it!!! :naughty:

Peace
Drew

[the head]

any tracking numbers yet?

[MadScientist]

What are you missing? If you dont have tracking, your card didn't work when we charged for shipping!

PM me your order info.

Peace
Drew

[amplifi3d]

what is the new eta for my carpets :(

[amplifi3d]

im in japan right now, can i visit supermade and pick em up?

[MadScientist]

^^ How I wish that were so!!
I am going to place an order to Japan on the 30th... it will be on that shipment. Best I can do right now.

Peace
Drew

[spectro]

have you shipped the S14 clear lenses?

[the head]

Wing showed up via fedex saturday....thanks Drew!

[drift into a curb]

Hey Drew, I e-mailed you on the availability of the Attain solid shifter. So is this something that isn't in stock? What is turn around time? Let me know. THanks

James

[Slidin240Wayz]

It is always a pleasure to purchase parts from Drew. It pays off to help others and Drew took care of me very well. Thank you.

It was a treat just opening all the boxes.

He makes sure Fedex takes care of the packages.

http://i7.photobucket.com/albums/y264/Cdoria/DSC00601.jpg

Some extra goodies from Uras...

http://i7.photobucket.com/albums/y264/Cdoria/DSC00603.jpg

The reason why I would only purchase the g+ aero...

http://i7.photobucket.com/albums/y264/Cdoria/DSC00604.jpg

The oh so sweet new headlight setup...

http://i7.photobucket.com/albums/y264/Cdoria/DSC00606.jpg

Thank you very much Drew. It is always a pleasure.

Carlos Doria

[spectro]

this;:coold:

http://i9.photobucket.com/albums/a57/spectro3166/IMG_0470R.jpg

http://i9.photobucket.com/albums/a57/spectro3166/IMG_0472R.jpg

Got them saturday, put them on saturday and loving it. Thanks a lot man. :rawk:

[Slidin240Wayz]

HID Output shot please!

[Kuzumi]

now that i see what the G+ is made of i want it lol.

[amplifi3d]

any updates on the carpets :)

[amplifi3d]

anything :love:

[BOROSUN]

you havent got yours?

i already got my floor mat. i wish it had a supermade logo or something.

[drift into a curb]

Hey Drew, I e-mailed you on the availability of the Attain solid shifter. So is this something that isn't in stock? What is turn around time? Let me know. THanks

James

Back up for an answer...

[MadScientist]

amplifi3d - I would prefer to refund you the $150 or give you a store credit of $150. If you wish to wait I am working an order at the end of this month... Last month we had several issues preventing orders to be placed over the website so I had to delay everything. I will only be dealing with Super Made for the Wings, 180SX Headlight Kit, and Rear Window Wings (because its the same as 326 Power).

I am selling the S14 mats if anyone is interested they are the same as the GB price $150.

drift into a curb - These are Special Order, end of month for next order!! Includes Atain Shift Knob!! I love dealing with Attain... Last shipment had a cracked (from factory) shifter... I let them know about it and had a new one in less than a week, and I didn't have to return the cracked shifter... where Super Made only said they were sorry for mistake, please send template and order again.

spectro - Very Very nice... best Zenki lights I have seen yet!!

Slidin240Wayz - hahahaha... you know it! FedEx actually reads... UPS would think it was a joke and play football with the boxes.

the head - no prob... now post pics of that wang!!

Peace
Drew

[s14_rob]

can i still order the Super Made Checkered Floor Mats in LHD with black and white for s14 pm me thanks

[Teambadrun]

Ahh good to see someone is selling stuff from super-made.com in the states..

I have actually purchesed there s15 ( bought it early this year ).. I will be the official supermade australia.. It will make dealings internationally allot easier like this


!!http://i15.tinypic.com/4zityww.jpg

[Rkesh88]

i really want to see pics of the 180sx head light conversion and see how it works/fits/ect. im looking into them to buy in the near future

[amplifi3d]

[QUOTE][amplifi3d - Your in Hawaii... yours was the second order... you tell me what you would like (refund/ wait it out)... next order is being processed end of this Month!!/QUOTE]

Damnit! I'm usually not this annoying. But the end of this month now? so end of june? not may?

[AznDrftr.]

Im assuming this is all done with right?

[420sx]

hehe what did u want to buy dude? i like the new look on the hatch btw

[bosozoku.s14]

can u still get the spoiler for S13 coupe???

email me please [email protected]

[tacotacotaco]

FYI raretrick is outta business

[zaquanh]

are u going to get the 180sx tail lights

[bboyoracle]

Raretrick has CLOSED DOWN. Lock this thread.

[s14chase]

Im in, how long do I have to wait ?

[specialk2003]

You're about 2 years too late on this one. Did you read the post before yours?

[PacificDrift_Nick]

Im in, how long do I have to wait ?


ahhhahahahahahahahhaa
hah
aha
ha
a
hahahahahahhahahahahaha:ddog: