370cc pintle caps

[r_martin88]

hey does any one know where i can find the pintle caps for my sr injectors?

[codyace]

Are you speaking of those little caps that go on top, held down by 2 screws?

[spdfreek0o]

try contacting deatschwerks, they may be able to help you out.

[punxva]

he is talking about the caps on the injectors that cover the actual area where it sprays

[r_martin88]

yea the caps that cover the spraying area of the injectors are the ones im talking about and thank ill try them and see what they say tonite

[KA-T_240]

I might have them. Id have to check at the shop in the FI kit

[gonzoes14k]

not sure if you can buy them, but good luck gettin them off a used set, never had much luck...

[byhi]

google "pintle caps" i found a place that sells them in bulk.... i got like 80 of them for like 20 bucks... but i cannot find the bg.... or i;d just give you some, if i find the baggy in the next week i'll letcha know

[projekt_s13]

ive been looking for some too.

[r_martin88]

ok yea definetly let me know if you find the bag

[street240]

You can get them from your local nissan dealer. That is where I got mine. I did not feel like waiting. The extra price offset the shipping.

[RedtopTech]

do you recall the part #

[UNISA JECS]

You can get them from your local nissan dealer. That is where I got mine. I did not feel like waiting. The extra price offset the shipping.

Its not on Nissan FAST thats for sure but yea if you have a part number shoot it.

[bo2o]

y do you need them for? you could run with out htem i dont think it makes a big diff.

[thejapino]

I researched pintle caps before and read somewhere that the only purpose of those pintle caps is to keep the lower O-ring in place? I may be wrong tho.

[UNISA JECS]

y do you need them for? you could run with out htem i dont think it makes a big diff.

Imagine this scenario, boosting 10psi running the car pretty hard then all of a sudden the lower o-ring decides to push out the lower half of the fuel rail, then you get instant excessive amount of cool fuel filling up a very hot cylinder very fast, the purpose of the pintle cap is just that, avoding that scenario from happening, ever seen 43psi+ pressure fill up a cup, it'll make short work of that.

[!Zar!]

Yay for bumping year old threads...
ugh.

[Irukandji]

Yay for bumping year old threads...
ugh.

he had a question.. meaning he searched. this came up, so he bumped it.

[bziggers13]

deastchwerks for all your injector needs...