rear brakes?

[CoasTek240]

ok.. backing up kinda quickly .. pushed the brakes.. but not hard..lthere was a really loud screech.. i'm pretty sure brake pads are gone..
two questions:
i have a 92 coupe se.. do i have abs?
and
what pads do ya'll reccomend.. i probably will replace all of them..nothing to pricey.. but i don''t wanty cheap either.. ok. later

[nrcooled]

Look on your instrument panel for the yellow (or amber) light that is labeled antilock if you have that you have ABS also pop your hood and look to the top left hand corner for a abs controller it's silver and has two bleed plugs on top...makes bleeding super easy
I have Axxis MM all four corners they are noisey when hot but worth the money (like $150 for all four I think...bought a bunch of stuff at the same time) w/ cross drilled rotor in front. &nbsp;Just my .02 <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'>

[Kid Zelda]

Get a brake job, prob solve, your rotors must be wraped.
bingo

[tnord]

unless the car is gonna see track time, OEM pads are sufficient. otherwise, you can just replace the fronts with Hawk HPS for $45

[CoasTek240]

well i'm thinking i'll use this as an excuse to get slotted rotors, and some kvr pads in the rear
the fronts are great. but i'll eventually z32 swap the front brakes. well there goes my money i had saved on my HA's.
oh well it'll be worth it

[negular]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">look to the top left hand corner for a abs controller it's silver and has two bleed plugs on top...makes bleeding super easy</td></tr></table><span id='postcolor'>

is there a thing like this on z32s? i rather do this than take off a tire <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/cool.gif" border="0" valign="absmiddle" alt=':cool:'>