WTB: 5-speed parts for an s14

[C3Hove]

5 speed transmission from an S14 or s13 w/ s14 bellhousing
5 speed Driveshaft front and rear sections (i have abs and lsd)
Flywheel (new or resurfaced)
M/T flywheel bolts
Clutch Kit (Clutch, Throwout bearing, Pressure Plate, alignment tool)
Shifter assembly (plate, lower rubber boot, upper leather boot, finisher plate)
5 speed Crossmember
Clutch Master cylinder
Clutch Slave cylinder
Clutch hardlines
Clutch rubber line and dampener line
Clutch pedal assembly
5 Speed Brake pedal assembly or a cut brake pedal
Bellhousing bolts for a 5 speed bellhousing (some of the A/T bolts can be reused)
Bolts to hold Pressure Plate to Flywheel (same thread as bolts that hold shifter to transmission, but a tad shorter)


I need those parts...Thank you for viewing

[Indolent]

-MT flywheel bolts
-transmission that i might want to sell s14 90 k miles, but still leaning towards keeping it
-auto brake pedal if you feel like cutting it yourself
-used clutch, pressure plate 4 k miles, compared to brand new clutch still kinda meaty
-big thick piped clutch dampener
email me at
[email protected]
if you're interested, make an offer

[C3Hove]

I would be interested but you are in Cali and shipping would be terrible.

thank you for posting though

[C3Hove]

bump...for me needing parts

[bardabe]

if you don;t like shipping you should post on the regional section.

[C3Hove]

Oh, I didn't know you could post WTB threads in there.

Thanks for the tip.

[Xantcha]

I have the rubber line that connects to the slave cyl. $10 + shipping?

[hnugen]

FYI, you dont really need the S14 housing with the S13 tranny. You can drill out the hole for the crank position sensor, which is $35 from Nissan if you can get the homie discount.

[C3Hove]

My dad is a nissan dealer..30% off of any oem/nismo part(no mark-up)

so I guess that is the "homie" discount, Mostly looking for a decent percentage of the swap though.

Thank you for the offer