PDA

View Full Version : Redoing the interior...


Drift Style S14
02-06-2002, 11:44 PM
How hard would it be to redo my interior? i want to do the cloth on the door pannels and the carpet. I was wondering how hard would it be to do the inserts, wouldn't i just need the cloth, fit it, and then glue it into place? As for the carpet, are there any sites that sell the carpet pre cut, only needing me to install it?

Archangel
02-07-2002, 12:41 AM
See if you can get ahold of Blank Flip on this board.
He has done a custom interior himself.
He posted pictures a while ago, and it looked really nice.
Not sure where he got all the stuff.
Try a search for topics started by him.

wherezmytofu
02-07-2002, 01:19 AM
well the panels are easy...but the carpet you need to get one molded for the car...anyway to change the cloth in the door paneles and practicall all of it is about the same...heres how you do the door panel, firsl remove the door panal, take all noticable screws out, there is ont it the handle and one ther eis a secret cover where the unlock button the goes red its after u take then all off just rip the door panel off, it's held on by clips, look at it and i'd take u .5 seconds to figure it out, the panel that has the cloth is help into the panel by a piece of metal it is glued on, and the metal has ends that bend and hold on to the panel, unbend these. rip the old cloth off...get now one and foam, glue back on metal and put everhting back on...dono!

Drift Style S14
02-07-2002, 01:36 AM
so basiclly cut and paste it the new stuff in? where would i get the foam at? it doesn't look like normal stuff. I thought is was blue six who did the custom interior, well anyways if bank flip did hopefully he will read this and post some pics.

Drift Style S14
02-07-2002, 01:37 AM
so basiclly cut and paste it the new stuff in? where would i get the foam at? it doesn't look like normal stuff. I thought is was blue six who did the custom interior, well anyways if bank flip did hopefully he will read this and post some pics. oh and the panels are already off, most of the interior is ready to be stripped, just need to decide if i am really going to do it.

Archangel
02-07-2002, 01:43 AM
Sorry, my bad it was Blue Six, not Blank Flip.
Sorry. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>

mbmbmb23
02-09-2002, 12:19 AM
Heres some links I've collected.

Interior dash spray dye:

http://store.yahoo.com/rodi/dupvinfabspr1.html

Buy a can...and try removing some small...un-noticeable plastic trim peice..and see if you like how it looks.

Carpet links for the 240SX:

http://www.autoupholsterykits.com/carpet.html#nis

http://www.autostyles.com/nisscarp.htm

http://www.autocarpetoriginals.com/nissanprod.htm#1989-1994 240SX

these kits may only be for the s13 tho.


Good luck.


(when in doubt....just paint everything black...cant go wrong with that)


m

transient
02-09-2002, 11:41 AM
Just be extra careful about the carpet, I learned that when i put one in my old dodge. You really want to make sure you start with small holes and cut them bigger if you need to, it's pretty hard to regrow carpet, <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>

Drift Style S14
02-09-2002, 07:35 PM
Thanks for the links, got bigger problems now! half way through putting in my clutch and i can get two of the bolts on the tranny to come loose. Plus they are in a bad spot,i am FUCKED!!!