View Full Version : 2 S14's (Shells) and all Parts
driftshot
12-31-2006, 04:42 AM
I have 2 rolling S14 shells . One is stock purple 95' SE , the other is 96' red SE . The red shell has some front end driver side damage , but is not actually hindering anything on the car . The purple shell has the sunroof assembly , and the red one does not .
Will accept sale or trades on most parts , I have another S14 that I'm looking to work on at the moment . Shipping not preferred , but buyer will pay for shipping if neccessary .
1 Full set of all interior parts . (except undamaged radio trim)
All exterior parts , 2 of most of them .
All engine and transmission parts , 1 automatic transmission , 1 manual transmission (pending sale) .
Extra Parts
1 S15 Hipposleek front bumper (new) .
S14 Kouki side skirts (black) .
1 Set of front fenders (black) with side markers .
2 KA24DE blocks , both with all parts .
If you want it , chances are I have it . So just ask . Pictures will be provided after January 3rd by request only , as there are a lot of parts .
Addicted2Kouki
12-31-2006, 04:17 PM
you only have parts for these two cars?
s13poop
01-01-2007, 01:22 PM
do you still have the seats for the car??
grnappletree14
01-01-2007, 03:04 PM
do u have a s14 passenger side door and windshield
reaxion
01-01-2007, 03:53 PM
dibs on the kouki sideskirts. PM me
slideways14
01-01-2007, 03:59 PM
wingless trunk lid?
srkxxdenjin
01-01-2007, 04:02 PM
how much for the dash? you live in SD or Phoneix...if SD i can probably pick it up
juicyjay
01-01-2007, 05:43 PM
s14 5spd driveshaft?
driftshot
01-01-2007, 07:38 PM
yes , i have the S14 door and windshield (passenger) i have 2 , one red and one black .
yes i have a set of seats , 2 front and rear .
no wingless trunk lid .
yes i have a dash .
yes i have the 5spd driveshaft
let me know the prices , and we'll see if we can work something out .
tamdo7114
01-01-2007, 07:40 PM
do you have one complete ka24de motor
??
Kuzumi
01-01-2007, 07:48 PM
do you happen to have the manual front seatbelts
driftshot
01-01-2007, 08:13 PM
yes i havea complete motor
and the seatbelts are the same , and yes i have 3 sets .
hapaboi39
01-01-2007, 08:29 PM
If you have grey s14 seats i would be very interested.
Just PM me so we can discuss price.
Thanks!
az_240
01-02-2007, 12:07 AM
im interested in a complete 5 speed swap for an s14 minus the tranny, clutch, an flywheel if you got it. Are you in phx?
rhyderofthastorm
01-02-2007, 12:32 AM
do you have a s14 zenki bumper?
MrChow
01-02-2007, 01:02 AM
how much for the
S14 Kouki side skirts (black) ??
and shipping to 93940?
driftshot
01-02-2007, 01:30 AM
S14 zenki front and rear bumpers .
asking 240 for the sideskirts .
tamdo7114
01-02-2007, 01:48 AM
how much for a complete ka24de motor? and does it come with uncut harness, ecu and tranny? thanks
driftshot
01-02-2007, 05:26 AM
i have a couple people that already asked for the motors ... $350 is the current going price , w/o tranny harness and ECU , just the block complete
dookie
01-02-2007, 08:01 AM
Pics and price on the Sides shipped to 70503?
Kuzumi
01-02-2007, 10:33 AM
ready to purchase the seatbelts :)
paypal?
s13poop
01-02-2007, 11:09 AM
yes i have a set of seats , 2 front and rear .
.
have any pics?
are you ever gonna be down here in SOCAL?
LA area by anychance??
az_240
01-02-2007, 11:59 AM
You missed my ?
Do you have a 5 speed swap minus the tranny, clutch, flywheel available????
aznrib
01-02-2007, 12:57 PM
do u have a OBD1 manual ECU from the 95 zenki?
Cashizslick
01-02-2007, 01:00 PM
You've got mail on the Zenki Turn Signal (Driver's side).
Thanks
Azzazzyn
01-02-2007, 02:23 PM
that purple s14, would that be concord grey? if so how much for the passenger door? I don't even need the window or the interior pieces, I just need like a door shell basically.
jeprokz
01-02-2007, 03:35 PM
pm sent......
PM SENT DIBS ON THESE:
Driver's Door Panel (Both if they're at a great price, probably just 1 though)
Driver's Door handle cover piece
Passenger's window switch
Rear Seat Clips (The top half has clips that jut out and hold it in place -- Need those)
Radio/Center tray brackets and hardware for the brackets.
Center tray (Piece right by the radio, not the ashtray the big tray)
Campos
01-02-2007, 05:12 PM
full 5 lug conversion, how much shipped to tx 77651
mohammadz
01-02-2007, 06:39 PM
is it pssible to purchase one of the shells? like the complete body?
driftshot
01-03-2007, 06:20 AM
sides are $240 . pics later today
PM me about seatbelts if you haven't already .
i'm in SD ... won't be in LA area at all .
yes i have the 5 spd swap (-) those parts available
no OBD-1 ECU
hmm probably won't sell the purple door if the shell sells , but I do have 2 others , black and red . (?)
5 lug conversion not for sale , cuz then i'd be assed out on selling a shell
the 95' sale is pending at $800 (i think that's what was decided)
asking $600 for the '96
CleanS14
01-03-2007, 09:32 AM
I need the following semi interior parts:
1. weather lining surrounding both the passenger/driver's side door openings. This is the rubber piece that goes on the pinch weld edge on mating the interior metal to the exterior metal.
2. weather lining on both the passgener/driver's side door. This is the rubber and plugs that clip in to seal the door when you close it. It's attached to the door.
Let me know if you have these (you should as I don't think people are asking for these type of random parts LOL) and how much you are asking for them. I have a fedex account and will send you a packing slip if you can box up and drop off at a location. Let me know if you have them along with your paypal address.
Where are you located in San Diego? Perhaps I can have someone go pick up for me if you aren't willing to ship.
Thanks!
Jay
PITCH
01-03-2007, 10:20 AM
Dr. side RUCA do you have it?
driftshot
01-03-2007, 10:40 AM
yeah i have the linings on the doors , will get back with you later today ... after i update with pictures for everyone ...
wtf is "Dr. side RUCA" ? Driver side ____ ?
juice.def
01-04-2007, 10:51 AM
Do you have a brake master cylinder if so how much shipped to 94928 nor cal.
brainfood
01-04-2007, 11:58 AM
s14 tranny harness, preferably 5sp. and rear brakes (calipers, rotors, brake lines, ebrake cables) thanks
thanks!
EJ253
01-04-2007, 12:08 PM
do you have the taillights and turn signals (rectangular lights under headlights)?? please PM me
PITCH
01-04-2007, 12:17 PM
yeah i have the linings on the doors , will get back with you later today ... after i update with pictures for everyone ...
wtf is "Dr. side RUCA" ? Driver side ____ ?
Upper Rear Control Arm. drivers side.
georgesal
01-04-2007, 01:07 PM
hey sorry if this has been asked but are the shells still for sale, if so how much
driftin240
01-04-2007, 07:11 PM
got a turn signal/headlight switch?
driftshot
01-04-2007, 10:16 PM
apologize for not posting pictures today , emergencies happen , will update on saturday as i have work all day on friday ... again i apologize ...
EJ253
01-04-2007, 10:30 PM
do you have the taillights and turn signals (rectangular lights under headlights)?? please PM me
yes? no? you must've just read right over it
Densetsu Motorsports
01-04-2007, 10:53 PM
PM sent about seatbelts.
driftshot
01-04-2007, 11:26 PM
i have the tail lights , turn signals however i don't have an extra set .
yes on the control arm
yes on the shells 850 currently for the 95 , 600 for the 96
brainfood yes to your entire post .
yes to master cylinder .
pictures coming now . next post ... should take about 20 minutes i guess .
driftshot
01-05-2007, 12:25 AM
http://img84.imageshack.us/img84/824/picture002lx6.jpg
driver door (black)
http://img84.imageshack.us/img84/3900/picture003sv8.jpg
front bumper (red)
http://img215.imageshack.us/img215/1228/picture005oq3.jpg
95 Rear
http://img219.imageshack.us/img219/7049/picture006pm4.jpg
96 rear ... not damaged , rear bumper and tail light corners off while i was stripping the car ...
http://img219.imageshack.us/img219/6392/picture007xr2.jpg
96 block 94k miles
http://img219.imageshack.us/img219/945/picture008al4.jpg
91 block 100k miles (DOHC)
http://img219.imageshack.us/img219/2866/picture009lu7.jpg
rebuilt 96 head ... as you can see still bagged ...
http://img219.imageshack.us/img219/1120/picture010us3.jpg
95 front .
http://img153.imageshack.us/img153/5126/picture011yg0.jpg
96 rear bumper ...
http://img153.imageshack.us/img153/3586/picture012mc4.jpg
S15 Hipposleek Front Bumper (still in packaging also)
http://img153.imageshack.us/img153/2274/picture013ne6.jpg
Kouki Sideskirts
http://img153.imageshack.us/img153/8012/picture014ua9.jpg
passenger door (black)
http://img153.imageshack.us/img153/8779/picture015ov3.jpg
96 cams , intake manifold and exhaust manifold
http://img153.imageshack.us/img153/7126/picture016no2.jpg
red fenders , another intake manifold and various other parts pictured .
http://img153.imageshack.us/img153/6880/picture017wx6.jpg
Spec-C clutch and aluminum attatched flywheel
http://img153.imageshack.us/img153/182/picture018yg2.jpg
manual tranny .
http://img153.imageshack.us/img153/4537/picture019xp2.jpg
red hood (zenki)
http://img153.imageshack.us/img153/6509/picture020cp1.jpg
black hood (zenki)
http://img153.imageshack.us/img153/4769/picture021pu9.jpg
guages ... from the 96 ...
http://img153.imageshack.us/img153/103/picture022zk5.jpg
96 interior , dirty , but that's what happens when you strip a car ... will clean before purchase .
http://img153.imageshack.us/img153/4148/picture023nm1.jpg
front end damage . (MINOR) fender still fits on .
http://img153.imageshack.us/img153/5374/picture025wl8.jpg
close up of damage , looks worse than it is ...
http://img153.imageshack.us/img153/6664/picture026ww1.jpg
pushed back about 1/4 inch originally about 5 inches , now pretty much back in place ...
az_240
01-05-2007, 02:10 AM
got any pics of the 5 speed parts I pmed you? How many miles are on the parts?
Anymore info on the clutch/flywheel? whats it rated at? what kind of flywheel? miles?
FusionR240sx
01-05-2007, 02:17 AM
5 spd. shifter time shipped to 60018?
driftshot
01-05-2007, 05:15 AM
what other 5spd parts did you want a picture of ... the reason the pictures are so "blah" was because it was raining outside ... i couldn't move anything outside to take a picture , will take more pictures after work on saturday morning .
driftshot
01-05-2007, 06:22 AM
5spd shifter trim ? i don't have an extra ... sorry
ntraserz
01-05-2007, 10:18 AM
nevermind found answer
az_240
01-05-2007, 12:39 PM
5 speed s14 trans crossmember
5 speed s14 non abs driveshaft
manual flywheel bolts
manual engine backing plate
manual trans to engine bolts
clutch bolts
s14 clutch pedal
s14 brake pedal(optional)
clutch line upper
clutch line lower
clutch dampner(optional)
cluth master
clutch slave
lower shift boot with plate(mounts on your tunnel)
upper shift boot (recommend purchase new )
^these are the parts I need... If you could take 1 or 2 pics of everything together that would be fine. Everything in good shape? No leaks or anything? Miles? Info on the clutch/flywheel?
CASH IN HAND
swiftdrift
01-06-2007, 12:59 AM
hey do u still have 1 passenger side door and 1 passenger side fender for the Zenki? preferably black, but if not its cool. email me at
[email protected] if u got either of these items and prices on them. thanks alot
-Edgar
AzNCmB
01-08-2007, 10:23 AM
I need a driver's front lower control arm from an s14 asap...
please let me know how much shipped to zip code 70058?
thanks
BoostinGST
01-08-2007, 02:59 PM
i need the body harness off the 95... the one that goes behind the dash and has the fusebox and relays on it
driftshot
01-08-2007, 03:16 PM
offer on the harness ?
dvs954rr
01-08-2007, 04:08 PM
do you have the floormats?? How much for dash shipped to 60608, chicago,il
TiNMAN
01-08-2007, 04:56 PM
PM Sent! :aw:
Team Rootbeer
01-08-2007, 05:39 PM
still have the passenger compartment carpet and trunk area carpet?
if so, ill take it considering its in ok shape and you can get some pics of it.
BoostinGST
01-09-2007, 04:47 AM
$100 shipped sound good???
Trueno/S14 Slider
01-09-2007, 01:45 PM
OBD 2 wireharness. (S14) if you have one i'll buy it today.
s14-silvia
01-10-2007, 02:23 PM
guages ... from the 96 ...
how much ship to 98118
Dnight07
02-02-2007, 09:33 PM
how much for the s15 bumper? e-mail me @
[email protected]
StaticX27
02-02-2007, 11:31 PM
Got Driver / Passanger window switch? Also if you happen to have a good radio trim lying around, that'd be bad ass. PM me :)
fukdishiet
02-02-2007, 11:49 PM
how much for the whole car?
FusionR240sx
02-03-2007, 02:07 AM
5spd. shifter trim shipped to 60018. pm me price for that.
and the whole center counsel with shifter trim shipped to 60018, price for that as well.
pm me asap
gijoe69
02-03-2007, 04:21 AM
I need S14 Climate Control shipped to 94014 and PM for price thanks
i need a passenger side fender asap please...
Gramentz
02-03-2007, 02:46 PM
Do you still have the zenki drivers side fender? IF so, how much shipped to 32920?
jdmspooge
02-03-2007, 05:33 PM
Driftshot,
I'm still waiting for you to gimme a call about the 95...LMK asap please.
S14man95
02-03-2007, 07:56 PM
How much would a complete KA be shipped to 19465,PA?
motoman6968
02-04-2007, 01:16 AM
ok do you have the center consule and driverside door panel, if so contact me asap
rb25crazy
02-04-2007, 01:47 AM
how much for 5 lug hubs front and rears also the ash tray? shipped price to 91801 and some pics of them please...
[email protected]
i need a passenger side fender asap please...
still waitin on a price for this
rb25crazy
02-06-2007, 11:50 AM
any info on the 5 lug hubs i asked you about yet?
rockinpandas
02-06-2007, 03:23 PM
.................................
Josh=s14
02-06-2007, 04:22 PM
How much for the 95 manual ecu and do you have a driveshaft for the 95 w/abs? shiped to 37174:coolugh:
slow40
02-10-2007, 04:52 PM
the 95 has sunroof correct? if so i need the weather stripping around the sunroof ONLY...
my shit snapped and flew off on the interstate and i need that stripping before it rains...please let me know asap
greg
ps. shipped to 37072 (shouldn't be much) lemme know , thanx
blackmamba
02-10-2007, 07:24 PM
Hey I'm looking to buy a shell, nothing more, just the shell if it is in good shape lmk!!! 7572401038 or
[email protected] my name is enrique
gotta240
02-11-2007, 02:07 AM
I need an s14 radiator... Can you give me a price picked up please?
email me at
[email protected] or pm me...
thanks.
UsJdmTUner
02-26-2007, 03:25 PM
interested on clutch pedal assembly and cylinder...and lines.. and slave cylinder..center trim for manual.. let me know.. email me:
[email protected] or AIM: GQFOE ... shipped to NY 10314.. thanks
Hachir0ku
02-26-2007, 07:55 PM
I dont know if you're still alive, but just in case you read this, I'm interested in the black hood. Thanks.
thrOwsumDs
04-25-2007, 02:05 PM
would you happen to a dash?
tailspin
04-25-2007, 09:08 PM
I'm interested in your antenna and the wire that runs all the way to the radio.
please let me know
[email protected]
im in san diego... chula vista
was wondering if you still got the front seats?
TEALSQUEAL
04-26-2007, 05:28 AM
do you have the passenger side corner light? if so how much shipped to 40213
jdmspooge
04-26-2007, 06:58 AM
I don't think he is around anymore. I know because I bought the 95 shell from him.
urmyhero4now
04-26-2007, 07:38 AM
can i get the s14 hood latches off your hands? if so email me at
[email protected] (
[email protected] ..thanks) thanks.
project_sr20det
04-26-2007, 11:16 AM
Is the Shift Boot and Trim/Console already gone??????
bluepanda523
04-26-2007, 04:10 PM
which red is it? the super red or maroon? i need the trunk lid if its super red. lmk if you have it
beefcake6681
04-27-2007, 12:14 AM
Do you have the S14 stock airbox?
jvn421
04-27-2007, 12:55 AM
hey do you still have that drive shaft, ill give you 250 (+)
MaxS14
04-30-2007, 12:45 AM
Do you still have the kouki side skirts? Shipping to 70065? Very interested, cash in hand
thrOwsumDs
04-30-2007, 01:55 PM
i was just wondering if you have a dash?
projectRDM
04-30-2007, 02:13 PM
This thread died, along with the seller apparently, over four months ago. Why are you guys continuing to post?
MaxS14
04-30-2007, 05:24 PM
Just trying to find out, guess you answered our question then, huh?
TougeLabs
05-01-2007, 07:24 PM
i need the moldings and all the rubber gaskets and trim all around the doors and windows for both sides let me know if you can do that for me they have to be in perfect shape especially the upper moldings on the car itself thanks alot let me know
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.