PDA

View Full Version : vacuum question


draggin93
12-17-2006, 04:22 PM
I'm dropping a redtop in a 93 Nissan pickup and am having an issue with vacuum. With all of the vacuum lines connected the truck will turn over and fire but will not start. After which I get a crackling sound from the valve cover. If I disconnect this vacuum line:
http://i48.photobucket.com/albums/f206/xclusivecustoms/vacline.jpg
the truck will idle for about 30 seconds and then die. It also dies immediately if I touch the gas.

misfitsfreak81
12-17-2006, 07:58 PM
that line runs to your pcv valve. start with replacing that. have you removed the valve cover to check the cams and such? a crackling noise from there is never good. hope this helps.

draggin93
12-18-2006, 03:24 AM
Everything under the valve cover looks mint. I'll try replacing the pcv valve. Thanks.

markswagon
12-18-2006, 05:37 AM
try to check the timing on the cas. to see if its lined up right.

draggin93
12-23-2006, 01:18 PM
The crackling sound was the PCV valve, but it was not the reason that the truck would not start. Like an idiot, I had the fuel lines reversed.