PDA

View Full Version : s13 & s14 garage clean out


JDS Performance
12-17-2006, 01:42 PM
s13 & s14 garage clean out

I will add things as i find them, so keep checking back!

I will not hold anything unless you send me a non refundable deposit of 20% of total price of item, that’s only fair to everyone.

Everything is "SOLD AS IS" no refunds!

Located in Concord, NC 28027

Contact me at [email protected] < Paypal as well

All prices do not include shipping!

Anything over $150 will come with one of my KA24DET Guide DVDs for Free ($35 Value)! But you have to ask for it! :)

Engine Stuff;

KA24DE Block - $75

KA24DE Complete Head - comes with cams - $150

DOHC Head studs - $5

DOHC Oil Pan - $45 shipped

If you need anything off a motor I probably have it just ask.

S13 stuff;

S13 leather sunroof bag & tool bag - very rare! - $50

S13 front door and rear Sony Xplod speakers in awesome shape - $50

S13 console cubby - $20

S13 sunroof parts - $25

s13 door handle / power window switch / Passenger side only - $10

s13 Distributor - $40

s13 JASMA 3" catback resonator removed has a patch job, but would be easily fixed up the right way! - $200 - I WILL SHIP THIS!

92' s13 intake manifold w/ throttle body etc. missing injector caps and EGR tube - $75

93’ s13 intake manifold – parts - if you need anything off a s13 DOHC Intake manifold - I probably got it

Various Stuff;

KA starter - $45

KA DOHC - SOHC Resurfaced Flywheel - $75

KA DOHC - SOHC Stock Flywheel needs resurface - $40

3” test pipe - $35

s13 (will fit s14) KA KOYO Aluminum Radiator - In great shape – comes w/ KOYO cap - $275

S13 & S14 (2) clutch hardline from master cylinder to damper - $30

DOHC Water pump - $20 each

DOHC Knock sensor - $35

DOHC water pump pulley - $5

SR20DET harness - battery, starter, alternator etc. - $45

98’ Skyline HCR32 - Headlights w/ NO pigtails - $125

98’ Skyline HCR32 - Digital Climate Control w/Harness - $45

98’ Skyline HCR32 - Dash - $35

98’ Skyline HCR32 - Shifter Bezel - $10

98’ Skyline HCR32 - Steering shaft - $10

Used Bosch Iridium +4 - in great shape - $10

S14 Stuff;

S14 center console - has a crack in the rear - $45

S14 Zenki (Champagne) front grill - $25

S14 ODBII Tranny Crank Angle Sensor (wire does not come with it) - $35

S14 Stock Tension Rods - I have 3 - $15 each - $25 a set

s14 97' I believe this is called the A/C evaporator? it goes under the dash - $20

s14 A/C Bezel vent tabs and mounting tabs are broken off but can be crazy glued back on- $20

s14 stock tie rods - $20

s14 DOHC 5 speed MAFS 2 bolt holes are broken off but it stll mounts up and works good- $20

s14 Passenger Air Bag like New - $50

cleansilvia
12-20-2006, 08:09 AM
i'm down to buy one of the distributors if you can ship to cali, PM me please

JDS Performance
12-20-2006, 11:05 AM
i'm down to buy one of the distributors if you can ship to cali, PM me please

pm sent :bigok:

pr0ject TRUENO
12-20-2006, 03:50 PM
on the complete s13 intake manifold...i want all the sensors EGR etc. PM me a price to 95148 CA

JDS Performance
12-20-2006, 05:02 PM
on the complete s13 intake manifold...i want all the sensors EGR etc. PM me a price to 95148 CA

You got a pm - LMK :bigok:

remos
12-20-2006, 05:13 PM
very interested in the rps13 180 tails and center. been looking for them for a while. could u pm if ship to canada. thanx

JDS Performance
12-20-2006, 05:20 PM
very interested in the rps13 180 tails and center. been looking for them for a while. could u pm if ship to canada. thanx


you have pm :bigok:

pr0ject TRUENO
12-20-2006, 05:31 PM
could you pm me a price on just the sensors etc? i dont need the actual manifold sorry i wasnt clear on that post

JDS Performance
12-20-2006, 05:42 PM
could you pm me a price on just the sensors etc? i dont need the actual manifold sorry i wasnt clear on that post


yes just sent you another

pr0ject TRUENO
12-20-2006, 06:08 PM
would you happen to have the S13 alternator bracket?

JDS Performance
12-20-2006, 06:24 PM
would you happen to have the S13 alternator bracket?

I sure do - do you just want the bracket or the bolts etc? I also have the alternator as well.

pr0ject TRUENO
12-25-2006, 07:37 PM
I sure do - do you just want the bracket or the bolts etc? I also have the alternator as well.


bolts also thanks. no distributor. pm me a price shipped to 95148

JDS Performance
12-26-2006, 05:34 PM
bolts also thanks. no distributor. pm me a price shipped to 95148

well I went to get them today and they are gone I must have sold them?
Sorry man!

Fusion Factory
12-30-2006, 12:16 AM
Hey man, would you sell me the adapter for the HKS intake?
email- [email protected]

JDS Performance
12-30-2006, 05:03 PM
Hey man, would you sell me the adapter for the HKS intake?
email- [email protected]

pm sent :bigok:

Apossiblehybrid
12-30-2006, 05:18 PM
do you have the bracket that holds the metal power steering part in place for an s13 dohc

JDS Performance
12-30-2006, 05:19 PM
do you have the bracket that holds the metal power steering part in place for an s13 dohc

no sure dont sorry. - you could easily make one - go to Home depot and get a piece of aluminum and get to work!! :2f2f: :bigok:

JDS Performance
12-31-2006, 11:18 PM
alot of stuff added and prices changed for the new year - Happy New year!

JDS Performance
01-07-2007, 10:33 AM
I added some really cool stuff check it out! :bigok:

JDS Performance
01-09-2007, 06:36 PM
Buy this stuff up I need room for 5 speed swap

JDS Performance
01-20-2007, 09:55 PM
buy some stuff you know you want it! :x: :squintd: :drama:

na_isbest
01-20-2007, 11:28 PM
How about......radiator overflow tank???? Shipped to cali.

JDS Performance
01-21-2007, 08:22 AM
How about......radiator overflow tank???? Shipped to cali.

sorry dont have one.

nammy
01-22-2007, 09:32 AM
how much shippped for the test pipe to 14606?

JDS Performance
01-22-2007, 11:07 AM
how much shippped for the test pipe to 14606?

$35.00 should do it - LMK - [email protected] < Paypal too.

3” test pipe - $25
http://i82.photobucket.com/albums/j274/joshds25/DSCF0094.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0095.jpg

DUFFM4N
01-25-2007, 01:41 AM
pics of the electric fan..and how much shipped to 91006

95KA-Turbo
01-25-2007, 08:35 AM
Do you happen to have a OBD1 95/96 KA Intake manifold w/ sensors? If so I'd like a quote for one shipped to 23508. Thanks.

JDS Performance
01-25-2007, 04:25 PM
pics of the electric fan..and how much shipped to 91006

$65.00 shipped
LMK - [email protected] < Paypal too!

http://i82.photobucket.com/albums/j274/joshds25/DSCF0069.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0071-1.jpg

JDS Performance
01-25-2007, 04:26 PM
Do you happen to have a OBD1 95/96 KA Intake manifold w/ sensors? If so I'd like a quote for one shipped to 23508. Thanks.

sorry all I have is 2 s13 manifolds

quattrokai
01-25-2007, 04:37 PM
I'll take the SR harness.

JDS Performance
01-25-2007, 05:02 PM
I'll take the SR harness.

$60.00 shipped - LMK - [email protected] < Paypal too! :bigok:

GSXRJJordan
01-26-2007, 04:15 AM
any chance that you've got a dohc throttle cable and an s13 hood release cable in there?

gsxrjjordan at gmail dot com

JDS Performance
01-26-2007, 04:52 AM
any chance that you've got a dohc throttle cable and an s13 hood release cable in there?

gsxrjjordan at gmail dot com

sorry sure dont.

CoasTek240
01-26-2007, 08:29 AM
do you know how many miles (roughly) that were on the KA DOHC block?
-dave

punxva
01-26-2007, 09:40 AM
do you have a ka24de intake manifold from a s13? all i need is the upper part, but if you dont want to seperate it, i'll take it the only thing is i dont need the injectors, can i get a price shipped to 23325 if you do, thanks

drftsub
01-26-2007, 11:03 AM
knock sensor for sure good? can you post a pic?

thanks!

JDS Performance
01-26-2007, 03:33 PM
do you know how many miles (roughly) that were on the KA DOHC block?
-dave

92' - 113k
93' - 120k

JDS Performance
01-26-2007, 03:39 PM
do you have a ka24de intake manifold from a s13? all i need is the upper part, but if you dont want to seperate it, i'll take it the only thing is i dont need the injectors, can i get a price shipped to 23325 if you do, thanks

Intake manifold - $100 shipped - LMK [email protected] < Paypal too.
no injectors or fuel rail - no EGR tube - no EGR & Canister Control Solenoid Valve - even though they are in pix they are not included;
http://i82.photobucket.com/albums/j274/joshds25/DSCF0008-3.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0007-4.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0006-6.jpg

JDS Performance
01-26-2007, 03:42 PM
knock sensor for sure good? can you post a pic?

thanks!

Yes its good.
Just the Knock Sensor - $40 shipped
If you want the wiring harness for it - $65 shipped
LMK - [email protected] < Paypal too.
They will cost you around $80-$100 new not including the wiring harness

http://i82.photobucket.com/albums/j274/joshds25/DSCF0025-1.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0024-1.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0022.jpg

pr0ject TRUENO
01-26-2007, 05:06 PM
is the knock sensor for an S13? I just need the sensor, no subharness. PM me a price shipped to 95148

JDS Performance
01-26-2007, 05:40 PM
is the knock sensor for an S13? I just need the sensor, no subharness. PM me a price shipped to 95148

Price is same as above - I have a few of them - s13 and s14 knock sensors are the same - but if it makes you feel better - yes i came off a 93' DOHC

To be honest - I belive Nissan used the same knock sensor in all cars - please correct me if I am wrong.

gijoe69
01-27-2007, 03:06 PM
Do you still have the S14 Tension Rods? how are the bushings? also do you have S14 Climate control?

JDS Performance
01-27-2007, 03:18 PM
Do you still have the S14 Tension Rods? how are the bushings? also do you have S14 Climate control?

Yes Tension rods are listed in post - bushings needs new ones - and why you would want the stock bushings in there anyways I have no idea???

Sorry no Climate Control - I have the bezel listed in post.

JDS Performance
01-31-2007, 08:06 PM
:bigok: Buy some stuff :bigok:

JDS Performance
02-10-2007, 06:42 AM
:bigok: :aw: :2f2f: buy this stuff I want it gone.

NcTurnL
02-11-2007, 09:44 PM
Still have the Test Pipe?

Need it asap
Price quote for it shipped to 30087?

motoman6968
02-11-2007, 10:25 PM
ok I need sunroof latch, center consule and Drivers side door panel if you got it. Send me a PM with some pics if the consule is in good condition and latch and door panel are too then i'll take it.

JDS Performance
02-12-2007, 03:26 PM
Still have the Test Pipe?

Need it asap
Price quote for it shipped to 30087?

Sold sorry. LMK if you need anything else

JDS Performance
02-12-2007, 03:29 PM
ok I need sunroof latch, center consule and Drivers side door panel if you got it. Send me a PM with some pics if the consule is in good condition and latch and door panel are too then i'll take it.

S13 sunroof parts - $25
http://i82.photobucket.com/albums/j274/joshds25/DSCF0078.jpg

I dont have the driverside anymore someone bought it.
s13 door handle / power window switch / Passenger side only - $10
http://i82.photobucket.com/albums/j274/joshds25/DSCF0009.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0010.jpg

S14 center console - has a crack in the rear - $45
http://i82.photobucket.com/albums/j274/joshds25/DSCF0008-4.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0009-2.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0010-3.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0048.jpg

Hachir0ku
02-12-2007, 09:54 PM
Have pics of the radiator? how much is shipping to 92026?
Thanks

JDS Performance
02-13-2007, 06:07 AM
Have pics of the radiator? how much is shipping to 92026?
Thanks

Shipping will be an extra $45
LMK - [email protected] < Paypal too. Thanx!

s14 (will fit s13) radiator - $50
http://i82.photobucket.com/albums/j274/joshds25/DSCF0062.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0063.jpg

S13 (will fit s14) KA KOYO Aluminum Radiator - In great shape - comes w/ KOYO cap - $275
http://i82.photobucket.com/albums/j274/joshds25/DSCF0061.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0060.jpg

RanciD
02-13-2007, 09:06 AM
I'll take the ECU if you still have it. Just to confirm, it is a S13 KA24DE MT ecu?

Let me know, thanks.

JDS Performance
02-13-2007, 09:07 AM
I'll take the ECU if you still have it. Just to confirm, it is a S13 KA24DE MT ecu?

Let me know, thanks.

Yes that is correct and yes I still have it.

JDS Performance
02-20-2007, 07:13 PM
:aw: :bigok:

pearlwhiteS14
02-22-2007, 06:22 AM
I would like the sr starter, do you still have it?

zerooath
02-22-2007, 07:26 AM
what about a heater core can you pm me a price of yours

my heater works but takes FOREVER to get hot seriously...takes like 2 hours of it constantly being on.

JDS Performance
02-22-2007, 03:17 PM
I would like the sr starter, do you still have it?

never had a sr starter sorry

JDS Performance
02-22-2007, 03:18 PM
what about a heater core can you pm me a price of yours

my heater works but takes FOREVER to get hot seriously...takes like 2 hours of it constantly being on.

sorry dont have one

JDS Performance
03-09-2007, 04:08 PM
LMK what you need!:bigok:

altalti
03-11-2007, 01:32 PM
if you have a s14 shift boot pm me a shipped price if not free bump

JDS Performance
03-11-2007, 02:20 PM
if you have a s14 shift boot pm me a shipped price if not free bump

sure dont sorry